{"title":"2011-2016 6.7L","description":null,"products":[{"product_id":"10l1000-10l80-10l90-10r140-10r80-solenoid-stabilization-clip-insert-105740-01k","title":"10L1000, 10L80, 10L90, 10R140, 10R80 Solenoid Stabilization Clip Insert","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003e10L80, 10L90, 10R140, 10R80\u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 16pt;\"\u003e\u003cstrong\u003eSolenoid Stabilization Clip Insert\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 11pt;\"\u003ePart No. 105740-01K\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"sans\"\u003ePackage Quantity: \u003cstrong\u003e6\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIn GM 10L80\/90 and Ford 10R80\/140 10-speed transmissions, heavy linear force solenoids (LFS) are held in place by small spring retainers. These spring retainers are prone to collapse, allowing the solenoid to wobble and become off-center with the inboard valve and damage the casting at the clutch valve bore opening. These LFSs actuate by extending a small pintle about .090\" to stroke the inboard clutch control valve. When the spring retainer collapses and allows the LFS to be off-center, the pintle cannot stroke the clutch control valve appropriately, compromising the component apply timing and pressure, resulting in shift complaints and converter issues. Valve body damage can also occur if the LFSs remain loose, resulting in valve damage during rebuild.\u003c\/p\u003e\r\n\u003cp\u003eSonnax solenoid stabilization clip insert 105740-01K can be used in conjunction with OE spring retainers to secure the solenoids back in place. These solid steel clip inserts force the OE spring retainers to completely fill the casting and solenoid groove gap and prevent the retainers from future collapse. If the spring retainer has already collapsed, the clip insert can be used to reform the retainer to its proper size. Simply place it inside the retainer to expand it to appropriate retention dimensions.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePrevents future spring retainer collapse\u003c\/li\u003e\r\n\u003cli\u003eReshapes collapsed spring retainers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 14pt;\"\u003e\u003cstrong\u003eSymptoms:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLoss of shift solenoid control pressure\u003c\/li\u003e\r\n\u003cli\u003ePoor shift quality\u003c\/li\u003e\r\n\u003cli\u003eVarious shift concerns\u003c\/li\u003e\r\n\u003cli\u003eBurnt clutches\u003c\/li\u003e\r\n\u003cli\u003eTCC apply \u0026amp; release concerns\u003c\/li\u003e\r\n\u003cli\u003eDamaged valve body casting\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 14pt;\"\u003e\u003cstrong\u003eCause:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe small OE spring steel retainers used to hold the heavy solenoids in the valve body are prone to collapse, allowing the solenoids to wobble in the bore and preventing them from properly controlling the shift processes. Collapsed spring retainers also allow the solenoid to damage the casting at opening of the clutch valve bores.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 14pt;\"\u003e\u003cstrong\u003eCorrection:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eSonnax solid steel solenoid stabilization clip insert is used in conjunction with the OE spring steel retainer, whether they are collapsed or in their original shape. The clip insert forces the spring retainer to expand out to completely fill both the casting and the solenoid groove, preventing solenoid wobble.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273703989621,"sku":"105740-01K","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198650203_193063af-d207-45b0-9b64-f735e9ea82d3.jpg?v=1780955275"},{"product_id":"68rfe-m3ga-4c-snap-ring-retainer-m3ga-4c-978a","title":"68RFE M3GA 4C SNAP RING RETAINER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe 68RFE 4C snap ring is known for blowing out from the center support. This new Suncoast billet 4C snap ring retainer is a permanent fix. This is spring loaded piece encapsulates the snap ring effectively preventing this from ever occurring again.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273833226613,"sku":"M3GA-4C-978A","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642066.jpg?v=1780953752"},{"product_id":"10r60-category-3-expanded-capacity-borgwarner-rebuild-kit-w-pump-valve-body-sc-10r60-cat3b","title":"10R60 CATEGORY 3 EXPANDED CAPACITY BORGWARNER REBUILD KIT W\/ PUMP \u0026 VALVE BODY","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCar makers don’t often collaborate on projects, especially when they’re direct competitors. However, looming government fuel economy and emissions mandates can make strange bedfellows. And so, the Ford 10R60 10-speed automatic transmission was born. It was co-developed with General Motors, although Ford apparently took the engineering lead on the design. The mission was to create a 10 speed transmission that could improve both the fuel efficiency and performance of high-horsepower engines. The resulting Ford 10R60 transmission was advanced enough to handle the power of the Ford Explorer and Ford Bronco.\u003c\/p\u003e\r\n\u003cp\u003eLike it or not, a CVT transmission is one of the most efficient gearboxes ever invented. Because there are no actual gears, optimal engine speed can be continuously maintained depending on the load. This allows for seamless acceleration under hard throttle, and lower fuel consumption when you’re just cruising. On a traditional geared transmission, a certain amount of energy gets lost every time a gear ratio is changed. This penalizes both fuel economy and performance because the engine has to climb back to the RPMs it was just at. The Ford 10R60 10-speed transmission is designed to combine the efficiency benefits of a CVT, with the stepped feel of a traditional automatic transmission.\u003c\/p\u003e\r\n\u003cp\u003eTo create this optimal blend of performance and efficiency, the 10R60 transmission has a wide 7.39 gear ratio spread and a low 4.70 first gear for maximum performance off-the-line. Even though this Ford 10 speed automatic transmission has such a wide gear ratio, it has extremely small steps between the gears. This means the engine RPM only drops (approximately) 20% with each shift, which keeps the engine in the ideal RPM range to achieve either peak performance or efficiency (much like a CVT transmission). The Ford 10R60 also has three overdrive gears, which it can downshift from very quickly.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e10R60 Transmission Gear Ratios\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eFirst – 4.70\u003cbr\u003eSecond – 2.99\u003cbr\u003eThird – 2.15\u003cbr\u003eFourth – 1.80\u003cbr\u003eFifth – 1.52\u003cbr\u003eSixth – 1.28\u003cbr\u003eSeventh – 1.00\u003cbr\u003eEighth – 0.85\u003cbr\u003eNinth – 0.69\u003cbr\u003eTenth – 0.64\u003cbr\u003eReverse – 4.87\u003c\/p\u003e\r\n\u003cp\u003eAs shown above this transmission offers a beautiful shift recovery in every gear which lends itself the perfect unit for narrow power bands. This allows the use of much larger camshafts in a naturally aspirated application. If you are looking into going to a forced induction setup this shift recovery allows for larger turbo and AR housing for max performance. \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eNewly Designed Thermal Flow Control Filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R60 transmission has a newly designed filter has two types of media, fine and course (medium). The course media is common in most filters (orange filter paper), the fine media filtration (White paper) is the newer material. There is a thermal plate inside the filter that separates the course and fine media. When the oil is colder (higher viscosity) at startup, The fluid will flow through both the fine and course filter media.\u003c\/p\u003e\r\n\u003cp\u003eAs the fluid heats up (less viscosity) , the thermal plate will bend and restrict the coarse media section; directing most of the fluid through the fine media. Therefore catching more of the finer debris once the fluid is heated giving it a far superior filtration system.\u003c\/p\u003e\r\n\u003cp\u003eThis new Suncoast 10R60 rebuild kit comes with a new factory filter to ensure zero flow issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Clutches \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eBorgWarner friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. Borg's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of their friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli\u003eSmooth engagements\u003c\/li\u003e\r\n\u003cli\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe 10R60 Rebuild Kit and Its Contents \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis is a complete clutch and steel module kit that fits the new Ford 10R60 Transmission. This module kit contains all of the clutches and steels necessary to rebuild your 10R60 transmission. The Ford 10R60 transmission comes standard in the Ford Ranger, Bronco, and Explorer.\u003c\/p\u003e\r\n\u003cp\u003eThis SunCoast upgraded 10R60 transmission rebuild kit comes with proprietary BorgWarner clutches, steels, \u003c\/p\u003e\r\n\u003cp\u003eThis SunCoast 10R60 rebuild kit also contains all the frictions and steels you will need to do a clutch and steel replacement on a 10R60 transmission containing extra capacity \"E\" clutch modules. This 10R60 rebuild kit was designed to be a re-clutch for a stock capacity unit utilizing BorgWarner frictions and high-performance steels. Also included are a factory OEM filter and a high-performance overhaul kit.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Expanded Capacity Clutch Modules\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe 10R60 transmission, while a very capable unit, has its deficiencies just like anything else when it is asked to perform outside its original design intention. Since it's debut in 2018, Suncoast has been actively involved in research and development of this new platform. With our active partnership with BorgWarner, we can now deliver you the very best product to date with the 10R60 platform. These new Suncoast 10R60 transmission expanded capacity clutch modules that are included are completely drop-in replacements. Absolutely no machining is required.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"E\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIf the 10R60 transmission had evil twin redheaded stepchildren, the \"E\" clutch would definitely be one of them. This other proverbial thorn in your side would be the \"F\" clutch.\u003c\/p\u003e\r\n\u003cp\u003eThis clutch, the \"E\" clutch in a 10R60 transmission, is engaged in 1,3,5,6,7,8, and 9th. The real issue becomes apparent pretty quick. This clutch is cycled on 3 times and off 2 times by the time you are in 5th gear. The clutch is on in 1st then cycled off in 2nd, cycled back on in 3rd, then back off in 4th...only to be cycled back on in 5th gear. In higher-horsepower or higher-demand towing and hauling situations, this constant cycling on and off can lead to premature failure. \u003c\/p\u003e\r\n\u003cp\u003eSuncoast has addressed this issue with the 10R60 transmission by improving the clutch friction properties with the New BorgWarner material and increasing clutch capacity by a whopping 20%. This takes the clutch stack-up from a factory 4-clutch stack up to a 5-clutch stack-up. We simultaneously are addressing the heat issue with both improved friction coefficient, as well as increasing surface area. We are also utilizing 6 vs 5  full thickness steels . With the additional clutch plate and additional full thickness steel we are expanding the capacity without sacrificing steel thickness. This Suncoast 10R60 transmission \"E\" high capacity comes completely assembled and stacked up with a new (not used) OE machined drum, piston and backing plate.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"F\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis clutch is also prone to premature wear as we have seen with other Lepelletier Ravigneaux Gear sets...oncoming clutches in higher gears seems to take the blunt of the beating. With the new 10R60 transmission, the \"F\" clutch is no exception.\u003c\/p\u003e\r\n\u003cp\u003eThe \"F\" clutch is engaged in R,4,5,6,7,8 and 9th. The quickest path to early or premature degradation to this clutch pack is wide open throttle or heavy-load-indexed 3rd to 4th shifts. This is especially prominent in applications where torque management has been deleted.\u003c\/p\u003e\r\n\u003cp\u003eSuncoast has corrected this issue by adding 25% more capacity to this clutch pack by taking it from 4 clutches to 5 in this particular clutch pack.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e\u003cstrong\u003eThe Pro Loc Valve Body and Pump\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eWith the SunCoast 10R60 Pro Loc valve body, we are addressing several key issues we have seen in regard to the 10R60 transmissions. This is not an approach that is simply bumping in more line pressure in hopes of ascertaining more clamping force; it’s a multi-faceted approach addressing several key issues when exposing these units to more demanding driving environments. These range from heavy towing and hauling to street racing and drag racing. \u003c\/p\u003e\r\n\u003cp\u003eThe factory 10R60 transmission lock-up circuit is an impressive one, in that it can make converter lockup seem somewhat uneventful. The refinement in its engagement is definitely next-level to what we have seen in the past. As nice as this feels in reference to the NVH (Noise Vibration Harshness), when we start introducing situations where the load demands are testing the limits or outside what the vehicle was initially designed for, it can become a huge problem. \u003c\/p\u003e\r\n\u003cp\u003eIn our SunCoast 10R60 Pro Loc Valve Body we are specifically looking to decrease the time from initial lock-up apply to zero turbine slip. In doing this, we are changing the lockup circuit by replacing the torque converter clutch (TCC) valve in order to increase lockup holding apply fluid pressure. The lockup oil transition time is also improved by modifying critical oiling circuits for the fluid to reach the TCC clutch, resulting in quicker apply time, and therefore, reducing TCC clutch degradation. By reducing degradation per apply cycle, we are allowing for improved reliability and performance.\u003c\/p\u003e\r\n\u003cp\u003e(\u003cstrong\u003e\u003cem\u003eNOTE:\u003c\/em\u003e\u003c\/strong\u003e For maximum results in power levels exceeding 800HP, it is highly recommended that the TCC apply offset be changed in the factory file calibration)\u003c\/p\u003e\r\n\u003cp\u003eThe next facet we address is the lube circuit. The lube circuit on the 10R60 transmission is responsible for supplying oil to the planets, clutches, bushings, etc. From the factory, the lube circuit oil is dispersed throughout the transmission as low as 6 PSI. Under normal load demands, this is perfectly acceptable. In more stressful and demanding situations, an increase in lubrication to clutches, steels, planets is ideal for removing heat and dealing with the increased demands. \u003c\/p\u003e\r\n\u003cp\u003eIn our 10R60 Valve Body we are specifically addressing this circuit from 6 PSI to a whopping 20 PSI. This is a 250% improvement from the factory calibration, resulting in reduced frictional heat generated. This reduction in heat helps lessen pre-mature failure that can become increasingly evident in high horsepower applications.\u003c\/p\u003e\r\n\u003cp\u003eAnother modification to our SunCoast Pro Loc 10R60 Valve Body involves the regulator valve (latch valve) circuit. This oil circuit is responsible for fully engaging the clutches, allowing for full clutch line pressure. In factory form, the regulator valve we are specifically targeting is responsible for A, B, C, and F clutch packs. Of course, our primary clutch pack concern is the 'F\" clutch, which tends to be the first and most prominent clutch pack failure with the 10R60 in higher horsepower or more demanding environments.\u003c\/p\u003e\r\n\u003cp\u003eIn a factory 10R60 valve body calibration, the regulator valve (latch valve) becomes fully engaged, allowing full fluid flow for engagement at 120 psi. When this occurs, the oncoming clutch pack has maximal clamping force. When the clamping force is engaged to max capacity, we ascertain the greatest static and dynamic holding capacity. In stock form or even mildly modified vehicles, this is perfectly suitable; however, when we expose the vehicle to a more demanding environment this can be a weak link.\u003c\/p\u003e\r\n\u003cp\u003eWith our SunCoast 10R60 Valve Body we are decreasing the required pressure to fully engage the regulator to only 80psi. This is a 33% decrease in pressure needed to maximally engage the clutch regulator valve (latch valve) resulting in a quicker shift apply when engaging clutches A, B, C and F. This quicker engagement not only shortens shift times, but it also decreases the heat resonating in the clutch pack, preventing premature degradation and extending clutch life. To improve this shift calibration even more SunCoast is evacuating non-critical oil to increase apply rate.\u003c\/p\u003e\r\n\u003cp\u003eThe factory overall line pressure is modified on this new SunCoast pump\/valve body combo. SunCoast is increasing overall main line pressure as much as 60psi. This additional line pressure not only increases maximal clamping force of the individual clutch packs but increases overall pump volume production. To reduce the potential for runaway pressure and the over-compression of clutch fibers, the SunCoast 10R60 Valve Body does have a built-in bypass, dumping excessive pressure above 420psi.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased Line Pressure, as much as 60psi\u003c\/li\u003e\r\n\u003cli\u003eIncreased clamping force on all clutch packs\u003c\/li\u003e\r\n\u003cli\u003e250% Increase in Cooler Charge Pressure\u003c\/li\u003e\r\n\u003cli\u003eIncreased Lock-up Apply Pressure\u003c\/li\u003e\r\n\u003cli\u003e33% Decrease in Maximal Pressure Actuation of Clutch Packs\u003c\/li\u003e\r\n\u003cli\u003eShortened Shift Times\u003c\/li\u003e\r\n\u003cli\u003eImproved Clutch Wear  \u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273833193845,"sku":"SC-10R60-CAT3B","price":3695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649437.jpg?v=1780954052"},{"product_id":"suncoast-6r80-a-clutch-1-2-3-4-forward-torqkit-clutch-pack-2002-on-rtk-6r81","title":"SUNCOAST 6R80, A CLUTCH (1-2-3-4 FORWARD) TORQKIT CLUTCH PACK 2002-ON","description":"\u003cp\u003e\u003c\/p\u003e\u003cp class=\"paragraph-black---franklin-copy\"\u003eRaybestos® Powertrain 6R60, 6R80, ZF6HP26 A Clutch (1-2-3-4 Forward) Torqkit features an increased clutch count with 7 revolutionary GPZ frictions, 6 .069 Steel, 1 .084 Steel, and 1 .118 steel clutch plates to increase performance and durability.\u003c\/p\u003e\r\n\u003ch3 class=\"h3-heading-dark-part-page\"\u003eRecommended Use:\u003c\/h3\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eHigh-stress diesel, towing, or racing applications with increased horsepower and torque\u003c\/p\u003e\r\n\u003ch3 class=\"h3-heading-dark-part-page---data\"\u003eFriction Material Type:\u003c\/h3\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003cdiv class=\"part-page-part-number-div\"\u003e\r\n\u003cdiv class=\"part-page-data-title-text-block\"\u003eADVANTAGES\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cul class=\"part-page-list\" role=\"list\"\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eIncreases durability of the transmission\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMade with Raybestos GPZ material\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eInstallation instructions provided\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eReduces core temperatures\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eIncreases torque capacity\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eImproves clutch life\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMade In USA\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273833292149,"sku":"RTK-6R81","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648905_85adf936-e08b-4a98-af36-cab1f12a3af6.jpg?v=1780954006"},{"product_id":"10r140-category-2-raybestos-rebuild-kit-with-extra-capacity-e-and-f-clutch-packs-sc-10r140-cat2-d-r","title":"10R140 CATEGORY 2 RAYBESTOS REBUILD KIT WITH EXTRA CAPACITY  \"E\", AND \"F\" CLUTCH PACKS","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCar makers don’t often collaborate on projects, especially when they’re direct competitors. However, looming government fuel economy and emissions mandates can make strange bedfellows. And so, the Ford 10R140 10-speed automatic transmission was born. It was co-developed with General Motors, although Ford apparently took the engineering lead on the design. The mission was to create a 10 speed transmission that could improve both the fuel efficiency and performance of high-horsepower engines. The resulting Ford 10R140 transmission was advanced enough to handle the power of the Ford F-250, F-350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eLike it or not, a CVT transmission is one of the most efficient gearboxes ever invented. Because there are no actual gears, optimal engine speed can be continuously maintained depending on the load. This allows for seamless acceleration under hard throttle, and lower fuel consumption when you’re just cruising. On a traditional geared transmission, a certain amount of energy gets lost every time a gear ratio is changed. This penalizes both fuel economy and performance, because the engine has to climb back to the RPMs it was just at. The Ford 10R140 10-speed transmission is designed to combine the efficiency benefits of a CVT, with the stepped feel of a traditional automatic transmission.\u003c\/p\u003e\r\n\u003cp\u003eTo create this optimal blend of performance and efficiency, the 10R140 transmission has a wide 7.39 gear ratio spread and a low 4.70 first gear for maximum performance off-the-line. Even though this Ford 10 speed automatic transmission has such a wide gear ratio, it has extremely small steps between the gears. This means the engine RPM only drops (approximately) 20% with each shift, which keeps the engine in the ideal RPM range to achieve either peak performance or efficiency (much like a CVT transmission). The Ford 10R140 also has three overdrive gears, which it can downshift from very quickly.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e10R140 Transmission Gear Ratios\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eFirst – 4.70\u003cbr\u003eSecond – 2.99\u003cbr\u003eThird – 2.15\u003cbr\u003eFourth – 1.80\u003cbr\u003eFifth – 1.52\u003cbr\u003eSixth – 1.28\u003cbr\u003eSeventh – 1.00\u003cbr\u003eEighth – 0.85\u003cbr\u003eNinth – 0.69\u003cbr\u003eTenth – 0.64\u003cbr\u003eReverse – 4.87\u003c\/p\u003e\r\n\u003cp\u003eAs shown above this transmission offers a beautiful shift recovery in every gear which lends itself the perfect unit for narrow power bands. This allows the use of much larger camshafts in a naturally aspirated application. If you are looking into going to a forced induction setup this shift recovery allows for larger turbo and AR housing for max performance.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eNewly Designed Thermal Flow Control Filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R140 transmission has a newly designed filter has two types of media, fine and course (medium). The course media is common in most filters (orange filter paper), the fine media filtration (White paper) is the newer material. There is a thermal plate inside the filter that separates the course and fine media. When the oil is colder (higher viscosity) at startup, The fluid will flow through both the fine and course filter media.\u003c\/p\u003e\r\n\u003cp\u003eAs the fluid heats up (less viscosity) , the thermal plate will bend and restrict the coarse media section; directing most of the fluid through the fine media. Therefore catching more of the finer debris once the fluid is heated giving it a far superior filtration system.\u003c\/p\u003e\r\n\u003cp\u003eThis new Suncoast 10R140 rebuild kit comes with a new factory filter to ensure zero flow issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Clutches \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli\u003eSmooth engagements\u003c\/li\u003e\r\n\u003cli\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe 10R140 Rebuild Kit and its contents \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis is a complete clutch and steel module kit that fits the new Ford 10R140 Transmission. This module kit contains all of the clutches and steels necessary to rebuild your 10R140 transmission. The Ford 10R140 transmission comes standard in the Ford F-150, F-250, F350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast upgraded 10R140 transmission rebuild kit comes with new Raybestos GPZ clutches, steels, factory OEM filter and high performance overhaul kit.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast 10R140 rebuild kit contains all the frictions and steels you will to do a clutch and steel replacement on a 10R140 transmission containing a stock count clutches and steels. This 10R140 rebuild kit was designed to be a re-clutch for a stock capacity unit utilizing the Raybestos GPZ paper and high performance steels. \u003c\/p\u003e\r\n\u003ch2 class=\"light\"\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eMain Pressure Regulator Valve Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eWear in the main pressure regulator bore and on the outboard spool area of the valve is common in listed GM and Ford 10-speed transmissions. This wear minimizes line pressure control resulting in delayed shift engagement, poor shift quality and burnt clutches. Wear at the inboard spool and bore can lead to converter apply issues.\u003c\/p\u003e\r\n\u003cp\u003eInstalling the drop-in Sonnax main pressure regulator valve kit 105740-12K eliminates the leakage of line pressure signal oil to exhaust with the incorporation of an extended front valve spool. This valve spool is 270% longer than the OE spool, so actuates in unworn areas of the bore. The O-ringed end plug provides a positive seal and prevents critical signal fluid from leaking to exhaust. Both of these Sonnax features ensure your units will have proper line pressure control through all drive ranges.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eExtended outboard spool is 270% longer than OE and actuates in unworn areas of the bore\u003c\/li\u003e\r\n\u003cli\u003eO-Ringed end plug provides positive seal to prevent critical signal fluid from leaking to exhaust\u003c\/li\u003e\r\n\u003cli\u003eHardcoat anodized aluminum valve combats premature wear\u003c\/li\u003e\r\n\u003cli\u003eDrop-in Zip Valve parts install quickly and easily\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 class=\"light\"\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eSolenoid Stabilization Clip Insert\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIn listed GM and Ford 10-speed transmissions, heavy linear force solenoids (LFS) are held in place by small spring retainers. These spring retainers are prone to collapse, allowing the solenoid to wobble and become off-center with the inboard valve and damage the casting at the clutch valve bore opening. These LFSs actuate by extending a small pintle about .090\" to stroke the inboard clutch control valve. When the spring retainer collapses and allows the LFS to be off-center, the pintle cannot stroke the clutch control valve appropriately, compromising the component apply timing and pressure, resulting in shift complaints and converter issues. Valve body damage can also occur if the LFSs remain loose, resulting in valve damage during rebuild.\u003c\/p\u003e\r\n\u003cp\u003eSonnax solenoid stabilization clip insert 105740-01K can be used in conjunction with OE spring retainers to secure the solenoids back in place. These solid steel clip inserts force the OE spring retainers to completely fill the casting and solenoid groove gap and prevent the retainers from future collapse. If the spring retainer has already collapsed, the clip insert can be used to reform the retainer to its proper size. Simply place it inside the retainer to expand it to appropriate retention dimensions.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePrevents future spring retainer collapse\u003c\/li\u003e\r\n\u003cli\u003eReshapes collapsed spring retainers\u003c\/li\u003e\r\n\u003cli\u003eDrop-in Zip Valve™ parts install quickly and easily\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e\u003cstrong\u003eSolenoid Stabilization Retainer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe heavy linear force solenoids (LFS) in listed GM and Ford 10-speed transmissions are held in place by small spring retainers that are prone to collapse. When the retainers collapse, the solenoid wobbles in the bore, causing damage to the casting at the clutch valve bore opening. These LFSs actuate by extending a small pintle about .090\" to stroke the inboard clutch control valve. When the spring retainer collapses and the LFS is off-center, the pintle cannot stroke the clutch control valve appropriately, resulting in shift complaints and converter issues. Valve body damage can also occur if the LFSs remain loose, resulting in valve damage during rebuild.\u003c\/p\u003e\r\n\u003cp\u003eSonnax solenoid stabilization retainer 105740-19K replaces OE clips and provides 32% more surface area to create more support for the solenoid. Another design upgrade is the top of the clip is rolled over to create a positive stop for the flexible side to land against, furthering the prevention of retainer collapse.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e32% More casting-to-solenoid surface area for better support and leverage\u003c\/li\u003e\r\n\u003cli\u003ePositive stop retainer feature to prevent collapse\u003c\/li\u003e\r\n\u003cli\u003eDrop-in Zip Valve™ parts install quickly and easily\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Expanded Capacity Clutch Modules\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe 10R140 transmission, while a very capable unit, has its deficiencies just like anything else when it is asked to perform outside its original design intention. Since it's debut in 2018, Suncoast has been actively involved in research and development of this new platform. With our active partnership with Raybestos powertrain, we can now deliver you the very best product to date with the 10R140 platform. These new Suncoast 10R140 transmission expanded capacity clutch modules that are included are completely drop-in replacements. Absolutely no machining is required.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"D\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIt is not uncommon to see rapid degradation along with premature failure with this clutch pack in even stock form. \u003c\/p\u003e\r\n\u003cp\u003eThe \"D\" clutch is engaged in P, R,1,2,3,4,6,7,8,10. Where the problem lies is in its oncoming clutch responsibilities when engaged in 6th gear as the oncoming clutch. With this responsibility in higher horsepower or more demanding driving situations it becomes very obvious uptown teardown this clutch has seen its share of abuse.\u003c\/p\u003e\r\n\u003cp\u003eSuncoast provides GPZ friction material, providing higher friction coefficients, increasing torque capacity well beyond the factory limits. This along with our higher apply pressure with our high volume 10R140 transmission pump creates the perfect environment for more reliable shifts. The new Suncoast 10R140 transmission clutch module requires absolutely no machining or modifications to your current unit...we supply everything needed.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"E\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIf the 10R140 transmission had evil twin redheaded stepchildren, the \"E\" clutch would definitely be one of them. This other proverbial thorn in your side would be the \"F\" clutch.\u003c\/p\u003e\r\n\u003cp\u003eThis clutch, the \"E\" clutch in a 10R140 transmission, is engaged in 1,3,5,6,7,8, and 9th. The real issue becomes apparent pretty quick. This clutch is cycled on 3 times and off 2 times by the time you are in 5th gear. The clutch is on in 1st then cycled off in 2nd, cycled back on in 3rd, then back off in 4th...only to be cycled back on in 5th gear. In higher-horsepower or higher-demand towing and hauling situations, this constant cycling on and off can lead to premature failure. \u003c\/p\u003e\r\n\u003cp\u003eSuncoast has addressed this issue with the 10R140 transmission by improving the clutch friction properties with the New Raybestos GPZ material and increasing clutch capacity by a whopping 20%. This takes the clutch stack-up from a factory 5-clutch stack up to a 6-clutch stack-up. We simultaneously are addressing the heat issue with both improved friction coefficient, as well as increasing surface area. This Suncoast 10R140 transmission \"E\" high capacity comes completely assembled and stacked up with a new (not used) OE machined drum, piston and backing plate.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eThe \"F\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis clutch is also prone to premature wear as we have seen with other Lepelletier Ravigneaux Gear sets...oncoming clutches in higher gears seems to take the blunt of the beating. With the new 10R140 transmission, the \"F\" clutch is no exception.\u003c\/p\u003e\r\n\u003cp\u003eThe \"F\" clutch is engaged in R,4,5,6,7,8 and 9th. The quickest path to early or premature degradation to this clutch pack is wide open throttle or heavy-load-indexed 3rd to 4th shifts. This is especially prominent in applications where torque management has been deleted.\u003c\/p\u003e\r\n\u003cp\u003eSuncoast has corrected this issue by adding 25% more capacity to this clutch pack by taking it from 4 clutches to 5 in this particular clutch pack.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273833390453,"sku":"SC-10R140-CAT2-D-R","price":2362.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198660826.jpg?v=1780954058"},{"product_id":"10r140-category-1-raybestos-rebuild-kit-stock-clutch-counts-gaskets-and-filter-sc-10r140-cat1rd","title":"10R140 CATEGORY 1 RAYBESTOS REBUILD KIT, STOCK CLUTCH COUNTS, GASKETS AND FILTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCar makers don’t often collaborate on projects, especially when they’re direct competitors. However, looming government fuel economy and emissions mandates can make strange bedfellows. And so, the Ford 10R140 10-speed automatic transmission was born. It was co-developed with General Motors, although Ford apparently took the engineering lead on the design. The mission was to create a 10 speed transmission that could improve both the fuel efficiency and performance of high-horsepower engines. The resulting Ford 10R140 transmission was advanced enough to handle the power of the Ford F-250, F-350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eLike it or not, a CVT transmission is one of the most efficient gearboxes ever invented. Because there are no actual gears, optimal engine speed can be continuously maintained depending on the load. This allows for seamless acceleration under hard throttle, and lower fuel consumption when you’re just cruising. On a traditional geared transmission, a certain amount of energy gets lost every time a gear ratio is changed. This penalizes both fuel economy and performance, because the engine has to climb back to the RPMs it was just at. The Ford 10R140 10-speed transmission is designed to combine the efficiency benefits of a CVT, with the stepped feel of a traditional automatic transmission.\u003c\/p\u003e\r\n\u003cp\u003eTo create this optimal blend of performance and efficiency, the 10R140 transmission has a wide 7.39 gear ratio spread and a low 4.70 first gear for maximum performance off-the-line. Even though this Ford 10 speed automatic transmission has such a wide gear ratio, it has extremely small steps between the gears. This means the engine RPM only drops (approximately) 20% with each shift, which keeps the engine in the ideal RPM range to achieve either peak performance or efficiency (much like a CVT transmission). The Ford 10R140 also has three overdrive gears, which it can downshift from very quickly.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e10R140 Transmission Gear Ratios\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eFirst – 4.70\u003cbr\u003eSecond – 2.99\u003cbr\u003eThird – 2.15\u003cbr\u003eFourth – 1.80\u003cbr\u003eFifth – 1.52\u003cbr\u003eSixth – 1.28\u003cbr\u003eSeventh – 1.00\u003cbr\u003eEighth – 0.85\u003cbr\u003eNinth – 0.69\u003cbr\u003eTenth – 0.64\u003cbr\u003eReverse – 4.87\u003c\/p\u003e\r\n\u003cp\u003eAs shown above this transmission offers a beautiful shift recovery in every gear which lends itself the perfect unit for narrow power bands. This allows the use of much larger camshafts in a naturally aspirated application. If you are looking into going to a forced induction setup this shift recovery allows for larger turbo and AR housing for max performance.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eNewly Designed Thermal Flow Control Filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R140 transmission has a newly designed filter has two types of media, fine and course (medium). The course media is common in most filters (orange filter paper), the fine media filtration (White paper) is the newer material. There is a thermal plate inside the filter that separates the course and fine media. When the oil is colder (higher viscosity) at startup, The fluid will flow through both the fine and course filter media.\u003c\/p\u003e\r\n\u003cp\u003eAs the fluid heats up (less viscosity) , the thermal plate will bend and restrict the coarse media section; directing most of the fluid through the fine media. Therefore catching more of the finer debris once the fluid is heated giving it a far superior filtration system.\u003c\/p\u003e\r\n\u003cp\u003eThis new Suncoast 10R140 rebuild kit comes with a new factory filter to ensure zero flow issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Clutches \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli\u003eSmooth engagements\u003c\/li\u003e\r\n\u003cli\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe 10R140 Rebuild Kit and its contents \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis is a complete clutch and steel module kit that fits the new Ford 10R140 Transmission. This module kit contains all of the clutches and steels necessary to rebuild your 10R140 transmission. The Ford 10R140 transmission comes standard in the Ford F-150, F-250, F-350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast upgraded 10R140 transmission rebuild kit comes with new Raybestos GPZ clutches, steels, factory OEM filter and high performance overhaul kit.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast 10R140 rebuild kit contains all the frictions and steels you will to do a clutch and steel replacement on a 10R140 transmission containing a stock count clutches and steels. This 10R140 rebuild kit was designed to be a re-clutch for a stock capacity unit utilizing the Raybestos GPZ paper and high performance steels. \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273833423221,"sku":"SC-10R140-CAT1RD","price":2056.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649756.jpg?v=1780954056"},{"product_id":"suncoast-10r80-e-gpz-clutch-pack-stock-count-sc-10r80-rek","title":"SunCoast 10R80 \"E\" GPZ Clutch Pack (Stock Count)","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe 10-speed transmission platform (10R60,10R80,10R140,10L60,10L80,10L1000) is part of a joint venture between Ford Motor Company and General Motors to design and engineer two transmissions, a longitudinal 10-speed transmission and a transverse 9-speed trans-axle. Each company will manufacture its unique version of the transmissions in their factories.\u003csup id=\"cite_ref-1\" class=\"reference\"\u003e\u003c\/sup\u003e\u003csup id=\"cite_ref-2\" class=\"reference\"\u003e\u003c\/sup\u003e The 10-speed transmission was designed by Ford, while GM designed the 9-speed transmission which is used in transverse applications.\u003csup id=\"cite_ref-3\" class=\"reference\"\u003e\u003c\/sup\u003e\u003csup id=\"cite_ref-4\" class=\"reference\"\u003e\u003c\/sup\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R80 \"E\" clutch pack features Raybestos GPZ Clutches and Steels and is a stock clutch count power pack for the 10R80. This kit includes everything you need and is a complete drop-in with no other modifications needed.\u003c\/p\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eThe 10R80 E Clutch GPZ Friction Clutch Plate features enhanced performance made-in-USA GPZ friction material and is an upgraded replacement for the Ford 10R80 E Clutch OE friction clutch plate.\u003c\/p\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures, and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003cdiv class=\"part-page-part-number-div\"\u003e\r\n\u003cdiv class=\"part-page-data-title-text-block\"\u003e\u003cem\u003e\u003cstrong\u003eADVANTAGES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cul class=\"part-page-list\" role=\"list\"\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMade In USA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273833881973,"sku":"SC-10R80-REK","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649426.jpg?v=1780954049"},{"product_id":"allison-billet-c2-hub-a1-bc2","title":"ALLISON BILLET C2 HUB","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALLISON BILLET C2 HUB\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26;\"\u003eThis Shaft is machined from 300M billet steel.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eStronger than the O.E.M. intermediate shaft\u003c\/li\u003e\r\n\u003cli\u003eFeatures an added lubrication hole for the P-3 sun gear and pilot\u003c\/li\u003e\r\n\u003cli\u003eCNC machined and precision ground\u003c\/li\u003e\r\n\u003cli\u003eShaft is heat treated for added strength and durability\u003c\/li\u003e\r\n\u003cli\u003eThe shaft through hole is gun drilled to provide a polished interior finish, eliminating internal stress risers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cem\u003e\u003cspan style=\"color: #eb5f26;\"\u003e-Will only work with modified \u003ca href=\"product.asp?itemid=438\"\u003e\u003cspan style=\"font-size: 14pt; color: #eb5f26;\"\u003eP1 Sun Gear\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #ff0000;\"\u003e.\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cem\u003e\u003cspan style=\"color: #eb5f26;\"\u003e-P2 Planet \u003cspan style=\"text-decoration: underline; font-size: 14pt;\"\u003eNOT INCLUDED\u003c\/span\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273833980277,"sku":"A1-BC2","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642610.jpg?v=1780953753"},{"product_id":"10r140-category-1-raybestos-rebuild-kit-stock-clutch-counts-gaskets-and-filter-sc-10r140-cat1r","title":"10R140 CATEGORY 1 RAYBESTOS REBUILD KIT, STOCK CLUTCH COUNTS, GASKETS AND FILTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCar makers don’t often collaborate on projects, especially when they’re direct competitors. However, looming government fuel economy and emissions mandates can make strange bedfellows. And so, the Ford 10R140 10-speed automatic transmission was born. It was co-developed with General Motors, although Ford apparently took the engineering lead on the design. The mission was to create a 10 speed transmission that could improve both the fuel efficiency and performance of high-horsepower engines. The resulting Ford 10R140 transmission was advanced enough to handle the power of the Ford F150, F-250, F-350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eLike it or not, a CVT transmission is one of the most efficient gearboxes ever invented. Because there are no actual gears, optimal engine speed can be continuously maintained depending on the load. This allows for seamless acceleration under hard throttle, and lower fuel consumption when you’re just cruising. On a traditional geared transmission, a certain amount of energy gets lost every time a gear ratio is changed. This penalizes both fuel economy and performance, because the engine has to climb back to the RPMs it was just at. The Ford 10R140 10-speed transmission is designed to combine the efficiency benefits of a CVT, with the stepped feel of a traditional automatic transmission.\u003c\/p\u003e\r\n\u003cp\u003eTo create this optimal blend of performance and efficiency, the 10R140 transmission has a wide 7.39 gear ratio spread and a low 4.70 first gear for maximum performance off-the-line. Even though this Ford 10 speed automatic transmission has such a wide gear ratio, it has extremely small steps between the gears. This means the engine RPM only drops (approximately) 20% with each shift, which keeps the engine in the ideal RPM range to achieve either peak performance or efficiency (much like a CVT transmission). The Ford 10R140 also has three overdrive gears, which it can downshift from very quickly.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e10R140 Transmission Gear Ratios\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eFirst – 4.70\u003cbr\u003eSecond – 2.99\u003cbr\u003eThird – 2.15\u003cbr\u003eFourth – 1.80\u003cbr\u003eFifth – 1.52\u003cbr\u003eSixth – 1.28\u003cbr\u003eSeventh – 1.00\u003cbr\u003eEighth – 0.85\u003cbr\u003eNinth – 0.69\u003cbr\u003eTenth – 0.64\u003cbr\u003eReverse – 4.87\u003c\/p\u003e\r\n\u003cp\u003eAs shown above this transmission offers a beautiful shift recovery in every gear which lends itself the perfect unit for narrow power bands. This allows the use of much larger camshafts in a naturally aspirated application. If you are looking into going to a forced induction setup this shift recovery allows for larger turbo and AR housing for max performance.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eNewly Designed Thermal Flow Control Filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R140 transmission has a newly designed filter has two types of media, fine and course (medium). The course media is common in most filters (orange filter paper), the fine media filtration (White paper) is the newer material. There is a thermal plate inside the filter that separates the course and fine media. When the oil is colder (higher viscosity) at startup, The fluid will flow through both the fine and course filter media.\u003c\/p\u003e\r\n\u003cp\u003eAs the fluid heats up (less viscosity) , the thermal plate will bend and restrict the coarse media section; directing most of the fluid through the fine media. Therefore catching more of the finer debris once the fluid is heated giving it a far superior filtration system.\u003c\/p\u003e\r\n\u003cp\u003eThis new Suncoast 10R140 rebuild kit comes with a new factory filter to ensure zero flow issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Clutches \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli\u003eSmooth engagements\u003c\/li\u003e\r\n\u003cli\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe 10R140 Rebuild Kit and its contents \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis is a complete clutch and steel module kit that fits the new Ford 10R140 Transmission. This module kit contains all of the clutches and steels necessary to rebuild your 10R140 transmission. The Ford 10R140 transmission comes standard in the Ford F-150, F-250, F-350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast upgraded 10R140 transmission rebuild kit comes with new Raybestos GPZ clutches, steels, factory OEM filter and high performance overhaul kit.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast 10R140 rebuild kit contains all the frictions and steels you will to do a clutch and steel replacement on a 10R140 transmission containing a stock count clutches and steels. This 10R140 rebuild kit was designed to be a re-clutch for a stock capacity unit utilizing the Raybestos GPZ paper and high performance steels. \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834013045,"sku":"SC-10R140-CAT1R","price":2056.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649757.jpg?v=1780954045"},{"product_id":"10r140-f-gpz-raybestos-clutch-pack-stock-count-sc-10r140-rfk","title":"10R140 \"F\" GPZ Raybestos Clutch Pack (Stock Count)","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe 10-speed transmission platform (10R60,10R80,10R140,10L60,10L80,10L1000) is part of a joint-venture between Ford Motor Company and General Motors to design and engineer two transmissions, a longitudinal 10-speed transmission and a transverse 9-speed trans-axle. Each company will manufacture its own unique version of the transmissions in their own factories.\u003csup id=\"cite_ref-1\" class=\"reference\"\u003e\u003c\/sup\u003e\u003csup id=\"cite_ref-2\" class=\"reference\"\u003e\u003c\/sup\u003e The 10-speed transmission was designed by Ford, while GM designed the 9-speed transmission which is used in transverse applications.\u003csup id=\"cite_ref-3\" class=\"reference\"\u003e\u003c\/sup\u003e\u003csup id=\"cite_ref-4\" class=\"reference\"\u003e\u003c\/sup\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis is a 10R140 \"F\" clutch pack featuring Raybestos GPZ clutches and Steels. This is a stock clutch count power pack for the 10R140. This kit includes everything you need and is a complete drop in with no other modifications needed.\u003c\/p\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eThe 10R140 F Clutch GPZ Friction Clutch Plate features enhanced performance made-in-USA GPZ friction material and is an upgraded replacement for the Ford 10R140 F Clutch OE friction clutch plate.\u003c\/p\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003cdiv class=\"part-page-part-number-div\"\u003e\r\n\u003cdiv class=\"part-page-data-title-text-block\"\u003e\u003cem\u003e\u003cstrong\u003eADVANTAGES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cul class=\"part-page-list\" role=\"list\"\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMade In USA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834144117,"sku":"SC-10R140-RFK","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649342.jpg?v=1780954039"},{"product_id":"68rfe-guardian-rebuild-kit-no-torque-converter-sc-68-guardian-lc","title":"68RFE GUARDIAN REBUILD KIT (NO TORQUE CONVERTER)","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eKit Includes the Following:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNew 68RFE Thrust Washer Kit\u003c\/li\u003e\r\n\u003cli\u003e68RFE Complete Gasket and Sealing Kit\u003c\/li\u003e\r\n\u003cli\u003e68RFE Spin-on Filter\u003c\/li\u003e\r\n\u003cli\u003e68RFE Pan Filter\u003c\/li\u003e\r\n\u003cli\u003e68RFE Thrust Bearing Kit\u003c\/li\u003e\r\n\u003cli\u003eUpgraded 2C Clutch Set\u003c\/li\u003e\r\n\u003cli\u003e68RFE Billet 2C Piston\u003c\/li\u003e\r\n\u003cli\u003e68RFE Billet Overdrive Piston\u003c\/li\u003e\r\n\u003cli\u003e68RFE Accumulator Plate\u003c\/li\u003e\r\n\u003cli\u003e4C Snap Ring Retainer \u003c\/li\u003e\r\n\u003cli\u003eTransgo 200 PSI Valve Body Kit\u003c\/li\u003e\r\n\u003cli\u003eAccumulator Piston Kit\u003c\/li\u003e\r\n\u003cli\u003eZero Cavitation Filter Kit w\/ stock pan\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600;\"\u003eThe 68RFE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe 68RFE transmission is the big brother to the 45\/545RFE transmission. The RFE platform was originally designed by Chrysler and was introduced in 1999 with the debut of the new Jeep Grand Cherokee.\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003eThe \"RFE\" stands for Rear-wheel drive Fully Electronic control. The RFE design was mostly noted in the new design to have 3 \u003c\/div\u003e\r\n\u003cdiv\u003eplanetary sets for a 4-speed transmission in the 45RFE. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003eIn 2007, Chrysler debuted the new 6.7 Powerplant in the all new Dodge Ram, and Dodge wanted a transmission that was specifically designed for function. The previous platform utilized the Torqueflite 48RE platform and had been around since the late 50's when they released the first 727 in 1956 after purchasing the license from Simpson on the gearset in 1955. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe 46\/47\/48 Chrysler platforms were 3 and 4-speed units that were mechanically and hydraulically controlled, with the most notable control system being governor pressure.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe first improvement Chrysler wanted to make over the Torqueflite platform was, obviously, the amount of forward gear. For the 68RFE transmission, Chrysler opted to change to a six-speed unit. The additional gears allowed Chrysler to add higher 1st-gear ratios and tighter shift recovery from one gear to the next. The tighter shift recovery essentially keeps the vehicle in higher averaged horsepower and torque numbers, while also adding torque multiplication.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe gear ratios were increased. as well. The new 68RFE boasts a whopping 3.23:1 first gear, compared to the 2.45:1 first gear found in the previous 47\/48RE platform. Chrysler also increased second gear to a 1.83:1 versus the 1.45:1 found previously. The 68RFE was also given two overdrive gears, with 5th being .81:1 and 6th with the very deep .62:1. The predecessor had a single overdrive that was a .69:1.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600;\"\u003eThe Category Kits\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe SunCoast Category 68RFE transmission rebuild kits are designed and developed with intentions of taking a systematic approach to solving the issues with the 68RFE transmission.  We approach each deficiency and need from a scientific approach.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThese kits offer you the same recipes that are used in our facility. We aim to offer you the most complete series of 68RFE rebuild kits available on the market today. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe 2C Piston\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe factory molded piston is prone to uneven apply which leads to excessive heat in the clutches and steels creating premature failure. In this 68RFE transmission rebuild kit we replace the factory piston with a much improved billet piece that also allows for one additional clutch further increasing surface apply area. This new billet apply pistons corrects these issues and adds matched performance.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Solenoid Repair and Spacer Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe factory 68RFE transmission is known for giving false pressure switch codes. These false 68rfe pressure codes some times are the result of circuit board flexing. The 68RFE transmission solenoid block can very easily be rebuilt with this Sonnax kit. This 68RFE transmission solenoid repair kit uses both a spacer to stop the circuit board flexing and improved sealing components to prevent leakage.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600;\"\u003eThe plate to serve on\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThere factory 68RFE transmission accumulator plate is very weak and not held securely. This problem becomes even more apparent with the addition to higher line pressure which is a very common modification performed on the 68RFE\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThese new 68RFE transmission rebuild kits are designed with the builder in mind, we offer from mild to wild depending on what your needs are.\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834176885,"sku":"SC-68-GUARDIAN-LC","price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648816.jpg?v=1780953986"},{"product_id":"6r140-1-700-rpm-billet-quadralock-torque-converter-6r140-1","title":"6R140 1,700 RPM Billet Quadralock Torque Converter","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6R140 billet captured clutch torque converter tow\/street\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #ff6600;\"\u003eFeatures and Benefits:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFurnaced brazed fins\u003c\/li\u003e\r\n\u003cli\u003eADCCT Anti Drag Captured Clutch Technology\u003c\/li\u003e\r\n\u003cli\u003eUtilizes factory lock-up clutch damper \u003c\/li\u003e\r\n\u003cli\u003e4140 HTSR billet steel clutch retain ring\u003c\/li\u003e\r\n\u003cli\u003eCNC machined billet forged one piece cover\u003c\/li\u003e\r\n\u003cli\u003eTorrington Thrust bearing design\u003c\/li\u003e\r\n\u003cli\u003eIncreased clutch count\u003c\/li\u003e\r\n\u003cli\u003eQuadralock captured clutch technology\u003c\/li\u003e\r\n\u003cli\u003eLarger apply piston\u003c\/li\u003e\r\n\u003cli\u003eOver 1,000 PSI of additional clamping force\u003c\/li\u003e\r\n\u003cli\u003eUpgraded custom sprag\u003c\/li\u003e\r\n\u003cli\u003eBillet stator for improved efficiency\u003c\/li\u003e\r\n\u003cli\u003eMultiple stall speeds available\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eRevolutionizing this industry isn't easy. SunCoast has done it yet again with our new captured clutch 6R140 torque converter. This revolutionary new converter design is changing the way we look at converter lock-up strategies forever. The captured clutch design converter operates much differently than other conventional torque converters. The captured clutch design eliminates the need to exhaust fluid from the backside of the apply piston. This design allows for much quicker apply rates than what conventionally occurs.\u003c\/p\u003e\r\n\u003cp\u003eWith the multitude of SunCoast custom stator options we can build the perfect converter to address whatever needs you may have. Whether you are looking for an improved stock replacement, or full blown sled pulling rig, we have the ability to build it to your specific needs.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834111349,"sku":"6R140-1","price":3249.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642641.jpg?v=1780953755"},{"product_id":"68rfe-category-3-750hp-no-converter-sc-68rfe-3-lc","title":"68RFE CATEGORY 3 750HP NO CONVERTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eFeatures \u0026amp; Benefits\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e- Sonnax Smart-Tech® Overdrive Clutch Housing Kit\u003c\/li\u003e\r\n\u003cli\u003e- New 68RFE Thrust Washer Kit\u003c\/li\u003e\r\n\u003cli\u003e- New 68RFE Thrust Bearing Kit\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Complete Gasket and Sealing Kit\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Spin-on Filter\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Pan Filter\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Underdrive and Overdrive piston set\u003c\/li\u003e\r\n\u003cli\u003e- Upgraded 2C Clutch Set\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Billet 2C Piston\u003c\/li\u003e\r\n\u003cli\u003e- Suncoast Ducenti Valve body\u003c\/li\u003e\r\n\u003cli\u003e- Suncoast upgraded heavy duty sprag\u003c\/li\u003e\r\n\u003cli\u003e- Deep Mag Hytec pan\u003c\/li\u003e\r\n\u003cli\u003e- Suncoast Zero Cavitation filter kit\u003c\/li\u003e\r\n\u003cli\u003e- SunCoast OEM Solenoid Pack \u003c\/li\u003e\r\n\u003cli\u003e- Billet Flex Plate\u003c\/li\u003e\r\n\u003cli\u003e- Billet input shaft\u003c\/li\u003e\r\n\u003cli\u003e- 750 Horsepower\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; color: #eb5f26; font-size: 14pt;\"\u003eThe 68RFE\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe 68RFE transmission is the big brother to the 45\/545RFE transmission. The RFE platform was originally designed by Chrysler and was introduced in 1999 with the debut of the new Jeep Grand Cherokee. \"RFE\" stands for \u003cspan style=\"font-weight: bold;\"\u003eR\u003c\/span\u003eear-wheel drive \u003cspan style=\"font-weight: bold;\"\u003eF\u003c\/span\u003eully \u003cspan style=\"font-weight: bold;\"\u003eE\u003c\/span\u003electronic control. The RFE design was mostly noted in the new design to have 3 planetary sets for a 4-speed transmission in the 45RFE. \u003c\/div\u003e\r\n\u003cp\u003eIn 2007, Chrysler debuted the new 6.7 Powerplant in the all new Dodge Ram, and Dodge wanted a transmission that was specifically designed for function. The previous platform utilized the Torqueflite 48RE platform and had been around since the late 50's when they released the first 727 in 1956 after purchasing the license from Simpson on the gearset in 1955. \u003c\/p\u003e\r\n\u003cdiv\u003eThe 46\/47\/48 Chrysler platforms were 3 and 4-speed units that were mechanically and hydraulically controlled, with the most notable control system being governor pressure.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe first improvement Chrysler wanted to make over the Torqueflite platform was, obviously, the amount of forward gear. For the 68RFE transmission, Chrysler opted to change to a six-speed unit. The additional gears allowed Chrysler to add higher 1st-gear ratios and tighter shift recovery from one gear to the next. The tighter shift recovery essentially keeps the vehicle in higher averaged horsepower and torque numbers, while also adding torque multiplication.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe gear ratios were increased. as well. The new 68RFE boasts a whopping 3.23:1 first gear, compared to the 2.45:1 first gear found in the previous 47\/48RE platform. Chrysler also increased second gear to a 1.83:1 versus the 1.45:1 found previously. The 68RFE was also given two overdrive gears, with 5th being .81:1 and 6th with the very deep .62:1. The predecessor had a single overdrive that was a .69:1.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; color: #eb5f26; font-size: 14pt;\"\u003eThe Category Transmissions\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe SunCoast Category 68RFE transmissions are designed and developed with intentions of taking a systematic approach to solving the issues with the 68RFE transmission.  We approach each deficiency and need from a scientific approach.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eWe aim to offer you the most complete series of 68RFE transmissions available on the market today. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14pt;\"\u003eSonnax Smart-Tech® Overdrive Clutch Housing Kit\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cp\u003eDodge trucks pulling heavy loads or boosted to 500–600HP are at high risk for overdrive burnup due to the stock transmission’s insufficient clutch capacity and fragile OE clutches.\u003c\/p\u003e\r\n\u003cp\u003eEven small amounts of heat and extra torque will push the thin (.034\"), single-sided clutches over the edge, distorting the clutch pack. The fact is, any distortion of the clutch pack takes the clearance out of spec and makes overdrive clutch burnup inevitable.\u003c\/p\u003e\r\n\u003cp\u003eKeep hardworking trucks on the road with the Sonnax Smart-Tech\u003csup\u003e®\u003c\/sup\u003e overdrive clutch housing kit 72960-16K. The unique billet aluminum housing increases OD apply area by 16% and holds a physically taller clutch pack. The 2X thicker steels increase clutch pack steel mass by 28% for maximum heat dissipation. The double sided BorgWarner clutch frictions are optimized for the 68RFE OD application and custom-made for the Sonnax kit. This guarantees an unrivaled combination of squawk resistance and maximum clutch capacity for any truck.\u003c\/p\u003e\r\n\u003cp\u003eThis groundbreaking kit is the only top-of-the-line upgrade that eliminates clutch problems without relying on valve body\/pump modifications or adding the expense of extra components.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eModified housing holds physically taller clutch pack for 20% more clutch capacity\u003c\/li\u003e\r\n\u003cli\u003e16% More OD apply area for firmer, more controlled shifts\u003c\/li\u003e\r\n\u003cli\u003e2X Thicker steels and double-sided clutches increase steel mass by 28% for maximum heat dissipation\u003c\/li\u003e\r\n\u003cli\u003eCustom BorgWarner clutches for maximum capacity with state-of-the-art squawk resistance.\u003c\/li\u003e\r\n\u003cli\u003eBolt-on anchor plate eliminates clutch pack flexing and distortion that contribute to heat build-up\u003c\/li\u003e\r\n\u003cli\u003eCombine with Sonnax line pressure booster kit \u003ca href=\"..\/i-30502995-line-pressure-booster-kit.html\"\u003eRFE-LB1\u003c\/a\u003e for even higher levels of performance\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 2C Piston\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe factory molded piston is prone to uneven apply which leads to excessive heat in the clutches and steels creating premature failure. In this 68RFE transmission rebuild kit we replace the factory piston with a much improved billet piece that also allows for one additional clutch further increasing surface apply area.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThese new 68RFE transmissions are designed with the builder in mind, we offer from mild to wild depending on what your needs are.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Ducenti\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eSunCoast is proud to release its new Pro-Loc Ducenti 200psi Shift Calibration Kit for the 68RFE. What we present to you today is not just a haphazardly put together solution but the cumulation of many years of refinement. \u003cbr\u003e\u003cbr\u003eIn this valve body, we address several key issues within this hydraulic circuit using a multi-faceted approach. This kit includes everything you will need to achieve 200psi without any additional tuning and is designed to be a complete drop-in. \u003cbr\u003e\u003cbr\u003eFeatures and benefits of this shift calibration kit include a new pump half, TCC limit valve, TCC switch valve, five billet three-ring accumulator pistons, billet upgraded valve body plate, an upgraded heavy duty accumulator plate, and custom-calibrated spring rates for PR circuit.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Solenoid Pack\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eEvery new Suncoast transmission receives a new OEM solenoid back from Mopar.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eZero Cavitation Filter Kit\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe factory 68rfe has had many issues with pressure relief check valve system on the transmission pan filters. Initially Chrysler had issues with the plastic filter splitting in half. This was later remedied by adding a pressure relief valve on top of the filter. This later showed to be an issue as the valve would release itself from the filter all together. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThis new bottom feeder filter kit allows the usage of a torqueflite filter. This filter conversion will not only prevent pump cavitation but will allow higher volume of fluid to be passed through the system. This will come with a specially machined Mag-Hytec pan.\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834242421,"sku":"SC-68RFE-3-LC","price":10185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648467_c1b70526-554a-4e4f-a16f-6d835d7e8d3c.jpg?v=1780953976"},{"product_id":"allison-billet-input-shaft-a1-109600","title":"ALLISON BILLET INPUT SHAFT","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALLISON BILLET INPUT SHAFT\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26;\"\u003eBuilt to withstand everything thrown at it. Made from a select grade of super strength steel.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShaft is 50% stronger than the O.E.M. shaft.\u003c\/li\u003e\r\n\u003cli\u003eMade from 9310 Vacumelt steel.\u003c\/li\u003e\r\n\u003cli\u003ePrecision ground for high dimensional accuracy.\u003c\/li\u003e\r\n\u003cli\u003eIdeal for heavy duty service applications.\u003c\/li\u003e\r\n\u003cli\u003eInput shaft is machined with larger than O.E.M. radius at turbine spline for added strength.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834340725,"sku":"A1-109600","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642606_9c7012e2-1e3d-4bf5-b344-b4cce5a172ce.jpg?v=1780953756"},{"product_id":"10r140-d-gpz-raybestos-clutch-pack-stock-count-sc-10r140-rdk","title":"10R140 \"D\" GPZ Raybestos Clutch Pack (Stock Count)","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe 10-speed transmission platform (10R60,10R80,10R140,10L60,10L80,10L1000) is part of a joint-venture between Ford Motor Company and General Motors to design and engineer two transmissions, a longitudinal 10-speed transmission and a transverse 9-speed trans-axle. Each company will manufacture its own unique version of the transmissions in their own factories.\u003csup id=\"cite_ref-1\" class=\"reference\"\u003e\u003c\/sup\u003e\u003csup id=\"cite_ref-2\" class=\"reference\"\u003e\u003c\/sup\u003e The 10-speed transmission was designed by Ford, while GM designed the 9-speed transmission which is used in transverse applications.\u003csup id=\"cite_ref-3\" class=\"reference\"\u003e\u003c\/sup\u003e\u003csup id=\"cite_ref-4\" class=\"reference\"\u003e\u003c\/sup\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis is a 10R140 \"D\" clutch pack featuring Raybestos GPZ clutches and Steels. This is a stock clutch count power pack for the 10R140. This kit includes everything you need and is a complete drop in with no other modifications needed.\u003c\/p\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eThe 10R140 D Clutch GPZ Friction Clutch Plate features enhanced performance made-in-USA GPZ friction material and is an upgraded replacement for the Ford 10R140 D Clutch OE friction clutch plate.\u003c\/p\u003e\r\n\u003cp class=\"paragraph-black---franklin-copy\"\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003cdiv class=\"part-page-part-number-div\"\u003e\r\n\u003cdiv class=\"part-page-data-title-text-block\"\u003e\u003cem\u003e\u003cstrong\u003eADVANTAGES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cul class=\"part-page-list\" role=\"list\"\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli class=\"part-page-advantage-list\"\u003eMade In USA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834307957,"sku":"SC-10R140-RDK","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649336.jpg?v=1780954038"},{"product_id":"smart-tech-input-housing-kit-sc-77733-06ka","title":"Smart-Tech Input Housing Kit","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #ff6600;\"\u003eFeatures and Benefits:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePTFE Impregnated Rear Stator Support Bushing\u003c\/li\u003e\r\n\u003cli\u003eModified Input Housing\u003c\/li\u003e\r\n\u003cli\u003eInput Drum Reinforcement Sleeve\u003c\/li\u003e\r\n\u003cli\u003eOverrun Piston Inner Seal\u003c\/li\u003e\r\n\u003cli\u003eOverrun Piston\u003c\/li\u003e\r\n\u003cli\u003e3-4 Clutch Apply Plate\u003c\/li\u003e\r\n\u003cli\u003e3-4 Clutch Return Springs (10)\u003c\/li\u003e\r\n\u003cli\u003eBolt-on Anchor Plate\u003c\/li\u003e\r\n\u003cli\u003eOverrun Piston Outer Seal\u003c\/li\u003e\r\n\u003cli\u003eSocket Head Cap Screws (15)\u003c\/li\u003e\r\n\u003cli\u003ePhysically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:\r\n\u003cul\u003e\r\n\u003cli\u003eModified Input Housing\u003c\/li\u003e\r\n\u003cli\u003e(8) .067” frictions with (7) .095” steels\u003c\/li\u003e\r\n\u003cli\u003e(9) .062” frictions with (8) .077” steels\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eAnchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up\u003c\/li\u003e\r\n\u003cli\u003eTreated housing is significantly more resistant to fatigue failure\u003c\/li\u003e\r\n\u003cli\u003eSteel reinforcement sleeve prevents breakage in the spline area\u003c\/li\u003e\r\n\u003cli\u003eCustom backing plate replaces OE retaining ring to eliminate risk of blowout\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003eLimitations of the GM 4L60-E, 4L65-E, 4L70-E OE input housing are the root cause of 3-4 burn-up in performance applications. The weak OE backing plate flexes during clutch apply, allowing heat to build up unevenly within the clutch pack’s limited space.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eSonnax Smart-Tech Input Housing Kit 77733-06K makes room for a taller clutch pack, anchored in place by a stronger backing plate, making it the only way to increase clutch capacity and protect against destructive heat.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eNumerous other improvements to the housing ensure maximum durability and protection against failure in higher-horsepower, higher-pressure applications.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe housing also is available with a pre-installed heavy-duty input shaft (77733-12KA).\u003c\/p\u003e\r\n\u003c\/div\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834668405,"sku":"SC-77733-06KA","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198646078_30a21ed0-5fcd-451a-8ed7-37efb58c7162.jpg?v=1780953757"},{"product_id":"4r100-cat-1-2000-stall-converter-sc-4r100c1-20","title":"4R100 CAT 1 2000 STALL CONVERTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e4R100 CAT 1 2000 STALL CONVERTER\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eSunCoast's Ford series torque converters use a larger than stock, triple clutch design for more holding power. Its forged billet steel covers provide added strength while also providing better heat distribution than stock type converters. Custom billet stators are available for increased torque multiplication and efficiency. These converters work for stock to high power applications for higher torque multiplication and better drivability.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDesigned and manufactured in house\u003c\/li\u003e\r\n\u003cli\u003eTig welding to reinforce furnace brazed fins\u003c\/li\u003e\r\n\u003cli\u003eSignature trapazoid clutch teeth (no round tabs)\u003c\/li\u003e\r\n\u003cli\u003eForged billet cover\u003c\/li\u003e\r\n\u003cli\u003ePiston and stators machined in house\u003c\/li\u003e\r\n\u003cli\u003ePressure tested welds\/spun balanced\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834733941,"sku":"SC-4R100C1-20","price":1569.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648571.jpg?v=1780953985"},{"product_id":"9-5-inch-245mm-billet-triple-disc-6l80e-torque-converter-sc-6l80e-245mm-ls","title":"9.5 INCH 245MM BILLET TRIPLE DISC 6L80E TORQUE CONVERTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6L80E 245MM Triple Disc Billet Carbon Fiber Torque Converter\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eFeatures and Benefits:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eStronger Chromoly steel turbine and impeller hub for additional strength and reliability.\u003c\/li\u003e\r\n\u003cli\u003eCustom upgraded sprag cartridge with over twice the holding capacity.\u003c\/li\u003e\r\n\u003cli\u003eThree friction surfaces more than triple surface area.\u003c\/li\u003e\r\n\u003cli\u003eWoven Carbon Fiber clutch material.\u003c\/li\u003e\r\n\u003cli\u003eFurnace Brazed Turbine and Pump Fins.\u003c\/li\u003e\r\n\u003cli\u003eTorrington Roller Bearing Construction.\u003c\/li\u003e\r\n\u003cli\u003eTig Welded Pump and Turbine Fins.\u003c\/li\u003e\r\n\u003cli\u003eCustom CNC'd Billet 4140 billet cover.\u003c\/li\u003e\r\n\u003cli\u003eCustom Billet Stator Cap.\u003c\/li\u003e\r\n\u003cli\u003eCustom Billet Apply Piston.\u003c\/li\u003e\r\n\u003cli\u003eCustom Heat Treated Steel Hub.\u003c\/li\u003e\r\n\u003cli\u003e3 year unlimited mileage warranty.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eSunCoast 6L80E torque converters come in many varieties, from heavy hauling, sled pulling, drag racing, to daily driving. SunCoast designs and manufactures their torque converters in-house. Because of this, SunCoast can supply most any request in regards to stall or torque multiplication. All SunCoast triple disc converters are outfitted with a heavy duty forged billet steel cover and give an unbeatable lock up performance. The companys race series converter should be used in racing\/pulling applications that require a higher stall RPM than a standard converter. Increased stall is usually needed in applications where a larger turbo or turbos have been installed and more RPM is required to get the turbo on boost while on the brakes (brake boosting).\u003c\/p\u003e\r\n\u003cp\u003eThis custom 245MM 9.5 inch 6L80E torque converter comes equipped with a new hardened Chromoly steel turbine for improved strength. Our extra thick forged billet apply piston ensures that there is zero deflection when applied so that it can withstand the most extreme applications.\u003c\/p\u003e\r\n\u003cp\u003eThis 6L80E torque converter also features a woven carbon fiber clutch plates to deliver maximum lockup capacity. The front cover on this new 6L80E torque converter also features a fully machined billet front cover that provides superior strength and durability.\u003c\/p\u003e\r\n\u003cp\u003eThe Suncoast 6L80E billet torque converter also features an upgraded sprag and impeller hub along with full torrington thrust bearing construction.\u003c\/p\u003e\r\n\u003cp\u003eThis torque converter is available in a variety of sizes and stall speeds depending on your needs.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273834766709,"sku":"SC-6L80E-245MM-LS","price":1695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198647758.jpg?v=1780953948"},{"product_id":"e4od-4r100-mag-hytec-pan-mag-e4od-4r100","title":"E4OD\/4R100 MAG-HYTEC PAN","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eE4OD\/4R100 MAG-HYTEC PAN\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Mag-Hytec E4OD\/4R100 Transmission Pan for your 1990 \u0026amp; Up F-Series provides function and fashion all in one package. Cast from A356-T6 aluminum, this textured powdercoated transmission pan provides increased fluid capacity for your hard working truck. The increased fluid capacity not only helps to cool your temperatures, but the built in cooling fins help remove heat as well. Each pan comes complete with hardware, magnetic drain plug assembly and an o-ring gasket for superior sealing.\u003c\/p\u003e\r\n\u003cp\u003eNote: Due to the extended depth of the deep sump pan, this transmission pan requires the use of a 4WD filter. (sold separately, see below)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct Highlights\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMagnetic Drain Plug\u003c\/li\u003e\r\n\u003cli\u003eDeep Sump For Increased Fluid\u003c\/li\u003e\r\n\u003cli\u003ePre-Drilled \u0026amp; Tapped 1\/8\" NPT Sender Port\u003c\/li\u003e\r\n\u003cli\u003eO-Ring Seal Requires No Additional Gaskets Or Seals\u003c\/li\u003e\r\n\u003cli\u003e7.6 Quarts Increased Capacity Over Stock!\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835094389,"sku":"MAG-E4OD\/4R100","price":455.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642344_7b271239-cb35-49df-bfb9-bf3fc072d34f.jpg?v=1780953768"},{"product_id":"suncoast-category-2-500hp-suncoast-5r110-transmission-4wd-no-converter-sc-5r110cat2-lc","title":"SunCoast Category 2 500HP SunCoast 5R110 Transmission 4WD NO CONVERTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSUN COAST 500HP CATEGORY 2 UPGRADED 5R110 TRANSMISSION W\/ BILLET VASCOMAX INPUT SHAFT, BILLET RING GEAR HUB, NO WALK CENTER SUPPORT AND SUNCOAST DIRECT POWERPACK\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003e5R110 transmission includes the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast Low\/Reverse Clutch Pack with 6 Clutches \u0026amp; 6 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Clutch Pack with 5 Clutches \u0026amp; 4 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Clutch Pack with 5 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Wide Load Direct Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Snap Ring\u003c\/li\u003e\r\n\u003cli\u003eSunCoast No Walk Center Support\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Valve Body Calibration Kit\u003c\/li\u003e\r\n\u003cli\u003eBillet Vascomax Input Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Rear Ring Gear Hub\u003c\/li\u003e\r\n\u003cli\u003eMag-Hytec Deep Pan\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe SunCoast Category 2 5R110 transmission takes another step forward in power handling with the addition of the billet rear ring gear hub in conjunction with the billet input shaft. The SunCoast Category 2 5R110 upgraded transmission also gets our proprietary pump and valve body modifications ensuring clean, crisp, and accurate shifts. At this power level a billet flexplate is recommended to ensure reliability.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003eTales from the 5R110\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe TorqShift 5-speed 5R110 transmission replaces the old faithful 4-speed 4R100 in the 2003 model year with the introduction of the new 6.0L diesel engine. The TorqShift design, in fact, has a total of six forward gears ratios; however, only five are advertised, with the hidden gear only being used in very cold weather. The five forward ratios are: 3.11, 2.22, 1.55, 1.00, andfinallyoverdrive is 0.71. The TorqShift also utilizes an optional 4th gear at 1.10, which is used in cold start conditions to aid in engine and transmission warm up.\u003c\/p\u003e\r\n\u003cp\u003eWith the TorqShift, once the Tow\/Haul mode is activated, it can help increase driver control when towing large loads up and down steep grades. It will also minimize shifts and maximize the available torque. Upon descent, the tow\/haul feature utilizes engine braking to help extend the life of the transmission and improves driver control.\u003c\/p\u003e\r\n\u003cp\u003eThe TorqShift was also Fords first attempt at adaptive control. The adaptive control shift function monitors the performance over its lifetime and adjusts shift times in real time to ensure consistency and compensate for wear. The TorqShift was also used with the 6.4L. This particular transmission was later replaced with the much larger and more robust 6R140 when the 6.7L PowerStroke was released by Ford.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eWalking Away from the Center Support\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe center support on a transmission is a critical component that could make the difference between success or failure. The center support acts as a stabilizer, just as our lower back and abdominal muscles support us. With the TorqShift being such a long unit, over time, the torsional flexing distorts the case, and the center support can sag and become displaced. The TorqShift relies on the center support to also apply fluid feed to the direct and forward clutches. When this distortion occurs, the fluid feed holes for direct and forward can become misaligned. This is especially true when towing heavy loads or under moderate-to-hard acceleration. This will also lead to premature failure and burnt clutches.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast has developed a new No Walk Center Support to correct this issue, which we include in this kit. We also go a step further with this and make a new Mag-Hytec pan standard to increase the rigidity of the case and reduce torsional flexing.\u003c\/p\u003e\r\n\u003cp\u003eWith this now being corrected, the need for the direct solid modification is no longer needed. We originally created this modification before learning about the torsional effect.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 'Wide Load\" Direct Clutch\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack has been a problem child for some time now. With the center support now being corrected, we move your attention to the most problematic area of the 5R110: the direct clutch. In the 5R110, the direct clutch pack has been the topic of so many discussions. In the beginning, we modified the direct clutch solenoid as a result of the fluid flow issues we were seeing and trying to compensate for what we would later find out was the center support walking. Today, many companies still sell these altered solenoids to try to correct a direct clutch issue. We have alleviated this with our new no walk center support.\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack is still one of the most abused clutch packs within the transmission. The direct clutch pack is constantly subjected to conditions that can prematurely wear. To alleviate this, SunCoast has developed our new wide load direct clutch pack. These new clutches are not only made from our SunCoast SCZ carbon graphitic material, but also a larger, wider clutch.\u003c\/p\u003e\r\n\u003cp\u003eMaking the clutch wider effectively increases the mean radius of a clutch, which in turn increases the torque capacity of said clutch. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eThis new wider clutch is also combined with the new wider steel and new wider apply plate. This combination, along with the new and improved No Walk center support, makes this the most loudly engineered kit on the market today.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Billet Ring Gear Hub\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Ford factory ring gear hub has many issues, even in stock form. When we start increasing load on the driveline via additional torque, larger wheels and tires, towing heavy loads or aftermarket tuning, this piece becomes very susceptible to catastrophic failure.\u003c\/p\u003e\r\n\u003cp\u003eThis unit comes with a new billet one-piece ring gear hub. This new billet hub is precision machined out of 4140 HTSR steel. This not only withstands the additional torque, but is also perfect for heavy duty towing applications.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Input Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe factory Ford input shaft is one of the smallest input shafts on the market today. Its lack of size makes for a sore subject with many of our customers after a simple programmer has proven to be too much. With factory wheels and tires, this is a standard replacement for all of our builds. With larger wheels and tire combinations, this becomes essential at stock horsepower\/torque.\u003c\/p\u003e\r\n\u003cp\u003eTire size, gear ratio, and reciprocating mass can all play a role in the amount of torsional fatigue that can occur. Torsional fatigue is one of the largest contributors to premature failure. Fatigue is something that occurs over time after repeated stress. So torsional fatigue is something that occurs over time after repeated stress. It is not so much the overall torque but the accumulation or sum of all the torque that the object has seen over time. SunCoast uses a new billet input shaft that is heat treated and precision ground from 300 maraging steel for maximum held strength. This shaft is a 100% drop-in assembly.\u003c\/p\u003e\r\n\u003cp\u003eMean effective radius is the distance from the theoretical center of the friction plate to the center of the friction material. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eInformation such as tire size, gear ratio, and reciprocating mass can all play a role in the torsional fatigue that occurs on these shafts. Torsional fatigue is one of the largest contributors to premature failure that we see. Fatigue is something that occurs over time after repeated stress. It is not so much the overall torque but the \"accumulation\" or \"sum\" of all the torque that the object has been exposed to over time. When you examine the different materials for making these shafts, you will see they come in a variety of grades with a variety of prices. While the more expensive grades such a Maraging, Vascomax, or even the much coveted Aeromet, have a stronger yield rate, they are much more resistant to fatigue.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835127157,"sku":"SC-5R110CAT2-LC","price":8295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648347_a6927cad-f778-4481-a64e-dc92c082db7c.jpg?v=1780953969"},{"product_id":"68rfe-mag-hytec-pan-mag-68rfe","title":"68RFE MAG-HYTEC PAN","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e68RFE MAG-HYTEC PAN\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eFits all 68RFE Automatic Transmissions behind the the 2007.5+ Dodge 6.7L Cummins Diesels. Deep high-capacity sump for maximum cooling Holds 2.5-3 quarts more than stock! Magnetic drain plug. All 303-type hardware except allen head cap screws, which are zinc plated. 1\/8 NPT temperature sender port. Finned aircraft aluminum construction. Requires only three allen key wrenches (included) for installation and service. O-rings require no gaskets or sealants. Tranny runs cooler, lasts longer. NOTE: Will not work with 3500 Cab \u0026amp; Chassis trucks which have an Aisin transmission. All Mag-Hytec products are covered by a lifetime limited warranty to the original owner against defects in parts and workmanship. O-rings are covered for five years.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835159925,"sku":"MAG-68RFE","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198647572_5924e43a-20b4-4455-95e8-8838e4096c01.jpg?v=1780953760"},{"product_id":"suncoast-category-4-700hp-suncoast-5r110-transmission-4wd-with-torque-converter-sc-5r110cat4","title":"SunCoast Category 4 700HP+ SunCoast 5R110 Transmission 4WD with Torque Converter","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSUN COAST 700HP+ CATEGORY 4 UPGRADED 5R110 TRANSMISSION W\/ BILLET AEROMET INPUT SHAFT, BILLET FLEXPLATE, BILLET RING GEAR HUB, BILLET REAR OVERDRIVE PLANET, BILLET INTERMEDIATE SHAFT, NO WALK CENTER SUPPORT AND SUNCOAST DIRECT POWERPACK\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003e5R110 transmission includes the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast Low\/Reverse Clutch Pack with 6 Clutches \u0026amp; 6 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Clutch Pack with 5 Clutches \u0026amp; 4 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Clutch Pack with 5 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Wide Load Direct Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Snap Ring\u003c\/li\u003e\r\n\u003cli\u003eSunCoast No Walk Center Support\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Thrust Washer Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Thrust Bearing Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Bushing Kit\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Valve Body Calibration Kit\u003c\/li\u003e\r\n\u003cli\u003eBillet Aeromet Input Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Rear Ring Gear Hub\u003c\/li\u003e\r\n\u003cli\u003eBillet Overdrive Planet\u003c\/li\u003e\r\n\u003cli\u003eMag-Hytec Deep Pan\u003c\/li\u003e\r\n\u003cli\u003eBillet Intermediate Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Flexplate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Billet Triple Disc Torque Converter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe SunCoast Category 4 5R110 transmission has it all. With the addition of the billet intermediate shaft and upgrading the shaft to Aeromet, there is not a stronger 5R110 transmission you will find anywhere. SunCoast engineering team has developed each specific piece to work in conjunction with each other. The transmission starts with a new 9C pump from Ford, then we use all new Ford solenoids. The shaft is then upgraded to Aeromet, and we add a billet intermediate shaft, as well. The pump and valve body on the category 4 Ford 5R110 transmission is also upgraded to our custom full competition specifications. This is the end-all be-all of the 5R110 transmissions.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003eTales from the 5R110 \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Torqshift 5-speed 5R110 transmission replaces the old faithful 4-speed 4R100 in the 2003 model year with the introduction of the new 6.0L diesel engine. The Torqshift design, in fact, has a total of six forward gears ratios, however only 5 are advertised. The \"hidden gear\" is only used in very cold weather. The 5 forward ratios are: 3.11, 2.22, 1.55, 1.00, and finally overdrive is .71. The Torqshift also utilizes an optional 4th gear, which is 1.10, that is used in cold start conditions to aid in engine and transmission warm up.\u003c\/p\u003e\r\n\u003cp\u003eWith the Torqshift, once the Tow \/ Haul mode is activated, it can help increase driver control when towing large loads up and down steep grades. It will also minimize shifts and maximize the available torque. Upon descent, the tow\/haul feature utilizes engine braking to help extend the life of the transmission and improves driver control.\u003c\/p\u003e\r\n\u003cp\u003eThe Torqshift was also Ford's first attempt at adaptive control. The adaptive control shift function monitors the performance over its lifetime and adjusts shift times in real time to assure consistency and to compensate for wear. The Torqshift was also used with the 6.4L as well. This transmission was later replaced with the much larger and more robust 6R140 when the 6.7L Powerstroke was released by Ford.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eUpdated Low\/Reverse Snap Ring\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eOn both really and late model 5R110 transmissions a common failure is that the low\/reverse retaining ring pops out of the case groove. This causes clutch slippage in reverse and due to radial movement in the pressure plate the retaining ring will walk right out of its groove. \u003c\/p\u003e\r\n\u003cp\u003eSunCoast replaces this retaining ring with an updated one that is much wider and thicker. The updated retaining ring provides increased outward tension which increases rigidity helping keep the ring seated securely in the case groove.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003eWalking Away from the Center Support. . . \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe center support on a transmission is a critical component that could make the difference between success or failure. The center support acts as a stabilizer, just as our lower back and abdominal muscles support us. With the TorqShift being such a long unit, over time, the torsional flexing distorts the case, and the center support can sag and become displaced. The TorqShift relies on the center support to also apply fluid feed to the direct and forward clutches. When this distortion occurs, the fluid feed holes for direct and forward can become misaligned. This is especially true when towing heavy loads or under moderate-to-hard acceleration. This will also lead to premature failure and burnt clutches.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast has developed a new No Walk Center Support to correct this issue, which we include in this kit. We also go a step further with this and make a new Mag-Hytec pan standard to increase the rigidity of the case and reduce torsional flexing.\u003c\/p\u003e\r\n\u003cp\u003eWith this now being corrected, the need for the direct solid modification is no longer needed. We originally created this modification before learning about the torsional effect.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 'Wide Load\" Direct Clutch\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack has been a problem child for some time now. With the center support now being corrected, we move your attention to the most problematic area of the 5R110, the direct clutch. In the 5R110 the direct clutch pack has been the topic of so many discussions. In the beginning we modified the direct clutch solenoid. We did this as a result of the fluid flow issues we were seeing, trying to compensate for what we would later find out was the center support walking. Today many companies still sell these altered solenoids to try to correct a direct clutch issue. We have alleviated this with our new no walk center support.\u003c\/p\u003e\r\n\u003cp\u003eMoving forward the direct clutch pack is still one of the most abused clutch packs within the transmission. The direct clutch pack is constantly subjected to conditions that can prematurely wear. To alleviate this SunCoast has developed our new \"wide load\" direct clutch pack. These new clutches are not only made from our SunCoast SCZ carbon graphitic material but a larger wider clutch as well.\u003c\/p\u003e\r\n\u003cp\u003eMaking the clutch wider effectively increases the mean radius of a clutch, increasing the mean radius increases the torque capacity of said clutch. What this mean is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eThis new wider clutch is also combined with the new wider steel and new wider apply plate. This combination along with the new and improved \"No Walk\" center support make this the most loudly engineered kit on the market today.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Billet Ring Gear Hub\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Ford factory ring gear hub has many issues even in stock form. When we start increasing load on the driveline via additional torque, larger wheels and tires, towing heavy loads or aftermarket tuning this piece becomes very susceptible to catastrophic failure. \u003c\/p\u003e\r\n\u003cp\u003eThis unit comes with a new billet one piece ring gear hub. This new billet hub is precision machined out of 4140 HTSR steel. This not only withstands the additional torque but is perfect for heavy duty towing applications.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Input Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eIn most of our 5R110 transmission rebuild kits we typically use a 300 Maraging billet steel, however in this particular SunCoast 5R110 transmission rebuild kit we upgrade to an aeromet material for the input shaft. \u003c\/p\u003e\r\n\u003cp\u003eThe aeromet input shaft is much stronger than the Vascomax material. This added strength helps resists sheer breaking which so common in the 5R110 transmission due to the smaller shaft size. A sheer break typically occurs with excessive power or the rapid loading and unloading of the transmission. This phenomenon is pretty common with wheel hop.\u003c\/p\u003e\r\n\u003cp\u003eThe Aeromet material also is much more resistant to torsional fatigue breakage. Fatigue breaks are pretty common in applications that include heavy towing and hauling.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Intermediate Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Ford 5R110 transmission has been known to strip the splines out on the intermediate shaft in even stock applications. It is also a well know fact that the intermediate shaft on these will fracture and sheer completely causing catastrophic failure within the unit. This problem is further agitated by the addition of larger tires, aftermarket performance modifications, and heavy towing\/hauling. When these shafts due break the collateral damage as a result can be very expensive.\u003c\/p\u003e\r\n\u003cp\u003eIn the SunCoast Category 4 5R110 transmission rebuild kit we upgrade the intermediate shaft to a precision machined billet steel shaft. This shaft is manufactured using 300m steel that has been heat treated for increased strength and reliability. This 5R110 billet intermediate shaft has also had the radius increased in critical load areas to withstand the additional loads.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eBillet Planet\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe overdrive planet on the 5R110W is a definite weak link in the higher horsepower applications. This is especially true when you factor in larger wheels and tires. \u003c\/p\u003e\r\n\u003cp\u003eThe billet overdrive planet housing is used in all of our competition 5R110W transmissions. This overdrive planet is precision machined out of 4140 HTSR billet steel. This eliminates both the spline failures as well as the housing shattering under heavy loads.\u003c\/p\u003e\r\n\u003cp\u003eMean effective radius is the distance from the theoretical center of the friction plate to the center of the friction material. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eInformation such as tire size, gear ratio, and reciprocating mass can all play a role in the torsional fatigue that occurs on these shafts. Torsional fatigue is one of the largest contributors to premature failure that we see. Fatigue is something that occurs over time after repeated stress. It is not so much the overall torque but the \"accumulation\" or \"sum\" of all the torque that the object has been exposed to over time. When you examine the different materials for making these shafts, you will see they come in a variety of grades with a variety of prices. While the more expensive grades such a Maraging, Vascomax, or even the much coveted Aeromet, have a stronger yield rate, they are much more resistant to fatigue.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835192693,"sku":"SC-5R110CAT4","price":12180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642753.jpg?v=1780953760"},{"product_id":"suncoast-category-2-500-hp-suncoast-5r110-rebuild-kit-with-torque-converter-sc-5r110sc-2","title":"SunCoast Category 2 500 HP SunCoast 5R110 Rebuild Kit With Torque Converter","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSUN COAST 500 HP CATEGORY 2 5R110 REBUILD KIT W\/ BILLET VASCOMAX INPUT SHAFT, BILLET REAR RING GEAR HUB, NO WALK CENTER SUPPORT AND SUNCOAST DIRECT POWERPACK\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eKit includes the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast Low\/Reverse Clutch Pack with 5 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Clutch Pack with 5 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Clutch Pack with 5 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Wide Load Direct Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Snap Ring\u003c\/li\u003e\r\n\u003cli\u003eSunCoast No Walk Center Support\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Valve Body Calibration Kit\u003c\/li\u003e\r\n\u003cli\u003eBillet Vascomax Input Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Ring Gear Hub\u003c\/li\u003e\r\n\u003cli\u003eBillet Triple Disc Torque Converter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003eTales from the 5R110 \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Torqshift 5-speed 5R110 transmission replaces the old faithful 4-speed 4R100 in the 2003 model year with the introduction of the new 6.0L diesel engine. The Torqshift design, in fact, has a total of six forward gears ratios, however only 5 are advertised. The \"hidden gear\" is only used in very cold weather. The 5 forward ratios are: 3.11, 2.22, 1.55, 1.00, and finally overdrive is .71. The Torqshift also utilizes an optional 4th gear, which is 1.10, that is used in cold start conditions to aid in engine and transmission warm up.\u003c\/p\u003e\r\n\u003cp\u003eWith the Torqshift, once the Tow \/ Haul mode is activated, it can help increase driver control when towing large loads up and down steep grades. It will also minimize shifts and maximize the available torque. Upon descent, the tow\/haul feature utilizes engine braking to help extend the life of the transmission and improves driver control.\u003c\/p\u003e\r\n\u003cp\u003eThe Torqshift was also Ford's first attempt at adaptive control. The adaptive control shift function monitors the performance over its lifetime and adjusts shift times in real time to assure consistency and to compensate for wear. The Torqshift was also used with the 6.4L as well. This transmission was later replaced with the much larger and more robust 6R140 when the 6.7L Powerstroke was released by Ford.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eWalking Away from the Center Support. . . \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe center support on a transmission is a critical component that could make the difference between success or failure. The center support acts as a stabilizer, just as our lower back and abdominal muscles support us. With the Torqshift being such a long unit, over time the torsional flexing distorts the case, and the center support can sag and become displaced. The Torqshift relies on the center support to also apply fluid feed to the direct and forward clutches. When this distortion occurs, the fluid feed holes for direct and forward can become misaligned. This is especially true when towing heavy loads or under moderate to hard acceleration. This will also lead to premature failure and burnt clutches.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast has developed a new \"No Walk\" center support to correct this issue, which we include in this kit. We also go a step further with this and make a new Mag-Hytec pan standard to increase the rigidity of the case and reduce torsional flexing.\u003c\/p\u003e\r\n\u003cp\u003eWith this now being corrected the need for the direct solid modification is no longer needed. We originally created this modification before learning about the torsional effect.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 'Wide Load\" Direct Clutch\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack has been a problem child for some time now. With the center support now being corrected, we move your attention to the most problematic area of the 5R110, the direct clutch. In the 5R110 the direct clutch pack has been the topic of so many discussions. In the beginning we modified the direct clutch solenoid. We did this as a result of the fluid flow issues we were seeing, trying to compensate for what we would later find out was the center support walking. Today many companies still sell these altered solenoids to try to correct a direct clutch issue. We have alleviated this with our new no walk center support.\u003c\/p\u003e\r\n\u003cp\u003eMoving forward the direct clutch pack is still one of the most abused clutch packs within the transmission. The direct clutch pack is constantly subjected to conditions that can prematurely wear. To alleviate this SunCoast has developed our new \"wide load\" direct clutch pack. These new clutches are not only made from our SunCoast SCZ carbon graphitic material but a larger wider clutch as well.\u003c\/p\u003e\r\n\u003cp\u003eMaking the clutch wider effectively increases the mean radius of a clutch, increasing the mean radius increases the torque capacity of said clutch. What this menaces the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eThis new wider clutch is also combined with the new wider steel and new wider apply plate. This combination along with the new and improved \"No Walk\" center support make this the most loudly engineered kit on the market today.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Input Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe factory Ford input shaft is one of the smallest input shafts on the market today. It's lack of size makes for a sore subject with many of our customers after a simple programmer has proven to be too much. With factory wheels and tires this is a standard replacement for all of our builds. With larger wheels and tire combinations this becomes essential at stock horsepower\/torque.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast uses a new billet input shaft that is heat treated and precision ground from 200 managing steel for maximum held strength. This shaft is a 100% drop in assembly.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Billet Ring Gear Hub\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Ford factory ring gear hub has many issues even in stock form. When we start increasing load on the driveline via additional torque, larger wheels and tires, towing heavy loads or aftermarket tuning this piece becomes very susceptible to catastrophic failure. \u003c\/p\u003e\r\n\u003cp\u003eThis unit comes with a new billet one piece ring gear hub. This new billet hub is precision machined out of 4140 HTSR steel. This not only withstands the additional torque but is perfect for heavy duty towing applications.\u003c\/p\u003e\r\n\u003cp\u003eThis is our base recipe less new Ford \"9C\" transmission pump and all new solenoids that we use on every rebuild. The SunCoast rebuild kit is designed to give the end user an option to build a transmission the SunCoast way using our proven \"SunCoast Recipe\".\u003c\/p\u003e\r\n\u003cp\u003eMean effective radius is the distance from the theoretical center of the friction plate to the center of the friction material.\u003c\/p\u003e\r\n\u003cp\u003eWhat this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835225461,"sku":"SC-5R110SC-2","price":5874.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642718.jpg?v=1780953761"},{"product_id":"5r110w-manual-5r110-atsg","title":"5R110W MANUAL","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e5R110W MANUAL\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eFord 5R110-W TorqShift ATSG rebuild\/overhaul manuals cover transmission assembly, dis-assembly, diagnosis, and troubleshooting. Book Is Fully Illustrated. Torque Shift Torqueshift.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835258229,"sku":"5R110-ATSG","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642340_62d2395a-1f3e-477e-b473-963f28506e76.jpg?v=1780953762"},{"product_id":"category-4-suncoast-950-hp-custom-allison-rebuild-kit-no-converter-gmax-cat4-lml-kit-lc","title":"CATEGORY 4 SUNCOAST 950+ HP CUSTOM ALLISON REBUILD KIT - NO CONVERTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e950+ HORSEPOWER LML 6-SPEED CATEGORY 4 SUNCOAST BASE REBUILD KIT\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eKit contains the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast custom clutch packs\u003c\/li\u003e\r\n\u003cli\u003eSunCoast custom Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast custom billet plates\u003c\/li\u003e\r\n\u003cli\u003eSunCoast custom overhaul kit\u003c\/li\u003e\r\n\u003cli\u003eValve body calibration kit\u003c\/li\u003e\r\n\u003cli\u003eSunCoast gasket kit\u003c\/li\u003e\r\n\u003cli\u003ePan Filter\u003c\/li\u003e\r\n\u003cli\u003eSpin on filter\u003c\/li\u003e\r\n\u003cli\u003ePan gasket\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Filter Loc\u003c\/li\u003e\r\n\u003cli\u003eNew internal wiring harness\u003c\/li\u003e\r\n\u003cli\u003eBillet SFI certified Flexplate\u003c\/li\u003e\r\n\u003cli\u003eBillet Input Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet P2 planet assembly\u003c\/li\u003e\r\n\u003cli\u003eBillet C2 clutch hub\u003c\/li\u003e\r\n\u003cli\u003eBillet Intermediate Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Output Shaft\u003c\/li\u003e\r\n\u003cli\u003eModified Sun Gear\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe SunCoast Category kits utilize the latest proven friction materials and steel technology from industry leading companies such as Alto and Raybestos. SunCoast works directly with these companies to design and manufacture proprietary SunCoast exclusive product lines, giving the end user uncompromised quality throughout the entire transmission. \u003c\/p\u003e\r\n\u003cp\u003eSunCoast has designed these kits in house to exact specifications for many in tents, including but not limited to towing, sled pulling, racing or simply having a vehicle to get from point A to point B.\u003c\/p\u003e\r\n\u003cp\u003eDesigned for light commercial vehicles in both on highway and public transport applications, Allison Transmission's 1000 and 2000 Series are rated up to 400 horsepower from the factory. Allison 5-speed transmission started in 2001 with GM equipped Duramax engines.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eKit Exclusives:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e- SunCoast proprietary C1, C2, C3, and C4 Alto carbonite frictions\/Rabestos SCZ frictions that contain no center slots. These frictions utilize a waffle pattern in the material to help retain oil helping the clutch cool when not applied.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\n\u003cli\u003e- Redesigned apply pistons with improved rubber compounds proven to hold higher heat. This custom piston allows us to use a thicker spring apply plate which replaces the thin OEM one that will cone and cause uneven apply surface resulting in premature clutch failure.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\n\u003cli\u003e- Custom SunCoast apply plate that redirects fluid to better lubricate frictions from the inside out which lubes the entire friction rather than OEM style that lubricates from the center out leaving the inner half of the clutch burnt.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\n\u003cli\u003e- C5 clutches are not included but can be added to your kit upon request.\u003c\/li\u003e\r\n\u003cli\u003e \u003c\/li\u003e\r\n\u003cli\u003e- Includes exclusive smart trim \/ clutch control valve.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\n\u003cli\u003e- Includes all items needed to modify the C2 clutch piston for increased clutch durability.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Flexplate\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis SunCoast Allison billet SFI certified billet flexplate replaces the factory flex plate with an improved billet steel one piece design. This eliminates the weak factory flex plate. This replacement Allsion flex plate is a must with the high torque in conjunction with a better designed torque converter that can transfer torque with no slip. The felxplate is bolted to the crankshaft and then the torque converter to the flex plate. This one piece billet flex plate is SFI certified to 29.3.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"font-weight: bold; color: #ff0000;\"\u003eNote:\u003c\/span\u003e A SFI certified flexplate is required on drag racing vehicles running 11.99 and quicker the 1\/4 mile and 7.49 and quicker in the 1\/8 mile, or any vehicle exceeding 135mph. In 2008 it was changed from the 29.1 SFI specification to the 29.3 specification for automatic transmissions for diesel applications. The new rules for the flex plate require that the material cannot be stamped metal as are many OEM flex plates.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Input Shaft \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe input shaft is the first thing to go south with the Allison transmission. This Allison billet input shaft is built to withstand everything you can throw at it. This new Allison billet input shaft is manufactured from 9310 Vacumelt steel which increases torsional fatigue strength by over 50%. The SunCoast Allison billet input shaft is machined with a larger radius at the turbine spline for added strength. This a must for vehicles that are lifted with larger wheels and tires, for heavy towing and hauling, and vehicles with aftermarket turbos.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eBillet Intermediate shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe factory intermediate shaft is one of the last hard parts to break typically on the Allison transmission.  SunCoast replaces this shaft on transmission that will be exposed to power levels above 750 horsepower. This new Allison billet intermediate shaft is made from a much stronger 300M billet material. This new billet intermediate shaft also feature an exclusive additional lubrication hole for the P3 sun gear and pilot increasing the life of that circuit. This SunCoast Allison intermediate shaft also has been gun drilled to provide a polished interior finish to eliminate any internal stress risers. This shaft is also heat treated for added strength and reliability.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eBillet Output Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Allison output shaft can be subjected to a tremendous amount of torsional fatigue. This issue can be even more troublesome with heavy towing\/hauling or when increasing horsepower and torque. SunCoast replaces the factory Allison output shaft with a billet piece on our Category 4 Allison rebuilds. This new Allison billet output shaft is machined from 300M billet steel and is a direct drop in replacement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eNew internal wiring harness\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eEvery build here at SunCoast reliability is our number one priority. Each one of our (Category) Allison rebuild kits comes with a new internal wiring harness. As the transmission continues to age, the plastic connectors become brittle and will break during disassembly. This often leaves builders scrambling around looking for a replacement last minute. This is a new GM harness with all new connectors.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Billet C2 Clutch Hub\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Allison transmission is an incredibly robust unit, however when exposed to conditions outside what it was designed for weak points begin to expose themselves. The factory C2 clutch hub has been known fail prematurely. This issue is most commonly seen in conditions where larger tire\/wheel combinations, heavy towing\/hauling, sled pulling, drag racing, and larger shock loads. \u003c\/p\u003e\r\n\u003cp\u003eSunCoast replaces the factory C2 clutch hub with a much stronger billet piece that is manufactured from 4140 heat treated stress relieved steel. This new Allison billet C2 clutch hub has had the spline lengthened .125 for increased contact area. The spline boss diameter has also been increased .100 for added strength. This Allison billet C2 clutch hub is installed on all SunCoast 700 horsepower category 3 transmissions.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Billet P2 Planet\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe P2 planet with the Allison transmission can strip or snap as a result of poor tuning, shock load, improperly built transmissions and higher horsepower applications. This failure can and will result in catastrophic failure and ore immobility. The SunCoast P2 planet is the solution to the issue. This item is manufactured here at SunCoast using 4140 billet steel that is then induction hardened.  This item is highly recommended for higher horsepower applications, including sled pulling, drag racing, as well as heavy duty towing. This planet comes with a machine SunGear which is required for use of the planetary.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Category Kits\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eSunCoast Category kits offer our customer the same recipes as our in house builds that have been proven for years both at the track and on the road. Our Category 4 Allison rebuild kit offers the customer our 950+ horsepower Allison rebuild. This rebuild kit includes everything you will need to build your Allison the same we we build here in house. This Allison rebuild kit also includes detailed instructions that will walk you through each step of the process.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835389301,"sku":"GMAX-CAT4-LML-KIT-LC","price":7995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648807.jpg?v=1780954001"},{"product_id":"allison-tech-manual-tmat-1000","title":"ALLISON TECH MANUAL","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 24pt;\"\u003eATTENTION: THIS TECH MANUAL WILL BE DELIVERED ON A USB DRIVE AND IS NO LONGER AVAILABLE IN PRINT.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eALLISON TECH MANUAL\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835454837,"sku":"TMAT-1000","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642570.jpg?v=1780953763"},{"product_id":"gm-4l60e-99-2013-deep-cast-transmission-pan-as-cast-1-5-quarts-over-stock-sc-9427-ac","title":"GM 4L60E (99-2013) Deep Cast Transmission Pan, as-cast.1.5 quarts over stock","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVolume:\u003c\/strong\u003e 1.5 quarts over stock GM deep pan\u003c\/p\u003e\r\n\u003cp\u003eThis deep pan fits GM 4L60E, 4L65E, 4L70E, and 4L75E transmissions.\u003c\/p\u003e\r\n\u003cp\u003eThis pan is designed as a heavy duty, extra capacity replacement for the GM and Chevy trucks and SUVs, 1999 and newer.\u003c\/p\u003e\r\n\u003cp\u003eThe step at the back of the PML pan matches the step at the rear of the stock pan to clear the exhaust pipe or frame cross member.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eExtra capacity\u003c\/li\u003e\r\n\u003cli\u003eDrain hole and magnetic drain plug for easy fluid changes\u003c\/li\u003e\r\n\u003cli\u003eFinned for cooling\u003c\/li\u003e\r\n\u003cli\u003eHeavy duty sand cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003eMachined flat gasket sealing surface\u003c\/li\u003e\r\n\u003cli\u003eCan optionally be machined for a temperture sending unit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003ePan includes magnetic drain plug and mounting hardware.\u003cbr\u003ePrice varies with finish.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835487605,"sku":"SC-9427-AC","price":345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649520_6145e9f1-6753-4bb0-8ff5-52f2669b5005.jpg?v=1780954065"},{"product_id":"as69rc-pml-deep-pan-cast-black-finish-sc-as69-db","title":"AS69RC PML DEEP PAN - CAST BLACK FINISH","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAS69RC PML DEEP PAN \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; color: #eb5f26;\"\u003e\u003cstrong\u003eFeatures Include The Following:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased oil capacity for cooler temperatures\u003c\/li\u003e\r\n\u003cli\u003eSand-cast aluminum with raised fins\u003c\/li\u003e\r\n\u003cli\u003e3\/16-inch thick wall construction to add strength to the transmission case\u003c\/li\u003e\r\n\u003cli\u003e3\/8-inch thick gasket flange will not bend when bolts are tightened\u003c\/li\u003e\r\n\u003cli\u003eMachined gasket surface for a secure seal\u003c\/li\u003e\r\n\u003cli\u003eBoss cast into pan can be machined for a temperature sensor\u003c\/li\u003e\r\n\u003cli\u003eDrain hole and magnetic drain plug for easier, less messy maintenance\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003eThe Aisin AS69RC transmission is found in 2013 and newer Ram 3500, 4500, 5500 trucks with the 6.7 Cummins Diesel. This PML pan features heavy duty construction, extra capacity, drain, and cooling fins. PML designed this pan to provide as much clearance as possible to the bolts at the rear of the pan. There is a cross member below these bolts and to access them on the stock pan or the PML pan, you will probably need to jack up the transfer case. This pan works with the stock gasket and filter. PML provides new mounting bolts and a magnetic drain plug with the pan.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835520373,"sku":"SC-AS69-DB","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642974_80698018-fd3b-4ad9-96ef-b1b988eb29e7.jpg?v=1780953766"},{"product_id":"10r80-transmission-overhaul-kit-without-pistons-sc-10r80-ohk","title":"10R80 Transmission Overhaul Kit Without Pistons","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e10R80 10-Speed Automatic Transmission Overhaul Repair Kit Without Pistons\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMetal Seals\u003c\/li\u003e\r\n\u003cli\u003eGaskets\u003c\/li\u003e\r\n\u003cli\u003eOrings\u003c\/li\u003e\r\n\u003cli\u003eLip Seals\u003c\/li\u003e\r\n\u003cli\u003eSealing Ring Kit\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835651445,"sku":"SC-10R80-OHK","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198653145.jpg?v=1780954050"},{"product_id":"suncoast-category-3-600hp-suncoast-5r110-transmission-4wd-with-torque-converter-sc-5r110cat3","title":"SunCoast Category 3 600HP SunCoast 5R110 Transmission 4WD with Torque Converter","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSUN COAST 600HP CATEGORY 3 UPGRADED 5R110 TRANSMISSION W\/ BILLET VASCOMAX INPUT SHAFT, BILLET RING GEAR HUB, BILLET REAR OVERDRIVE PLANET, NO WALK CENTER SUPPORT AND SUNCOAST DIRECT POWERPACK\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003e5R110 transmission includes the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast Low\/Reverse Clutch Pack with 6 Clutches \u0026amp; 6 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Clutch Pack with 5 Clutches \u0026amp; 4 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Clutch Pack with 5 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Wide Load Direct Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Snap Ring\u003c\/li\u003e\r\n\u003cli\u003eSunCoast No Walk Center Support\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Valve Body Calibration Kit\u003c\/li\u003e\r\n\u003cli\u003eBillet Vascomax Input Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Rear Ring Gear Hub\u003c\/li\u003e\r\n\u003cli\u003eMag-Hytec Deep Pan\u003c\/li\u003e\r\n\u003cli\u003eBillet Overdrive Planet\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Triple-Disc Billet Torque Converter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe SunCoast Category 3 5R110 transmission takes another step forward in power handling with the addition of the billet rear overdrive planet in conjunction with the billet input shaft and billet ring gear hub. The SunCoast Category 3 5R110 upgraded transmission also gets our proprietary pump and valve body modifications ensuring clean, crisp, and accurate shifts. At this power level a billet flexplate is recommended to ensure reliability.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003eTales from the 5R110\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe TorqShift 5-speed 5R110 transmission replaces the old faithful 4-speed 4R100 in the 2003 model year with the introduction of the new 6.0L diesel engine. The TorqShift design, in fact, has a total of six forward gears ratios; however, only five are advertised, with the hidden gear only being used in very cold weather. The five forward ratios are: 3.11, 2.22, 1.55, 1.00, andfinallyoverdrive is 0.71. The TorqShift also utilizes an optional 4th gear at 1.10, which is used in cold start conditions to aid in engine and transmission warm up.\u003c\/p\u003e\r\n\u003cp\u003eWith the TorqShift, once the Tow\/Haul mode is activated, it can help increase driver control when towing large loads up and down steep grades. It will also minimize shifts and maximize the available torque. Upon descent, the tow\/haul feature utilizes engine braking to help extend the life of the transmission and improves driver control.\u003c\/p\u003e\r\n\u003cp\u003eThe TorqShift was also Fords first attempt at adaptive control. The adaptive control shift function monitors the performance over its lifetime and adjusts shift times in real time to ensure consistency and compensate for wear. The TorqShift was also used with the 6.4L. This particular transmission was later replaced with the much larger and more robust 6R140 when the 6.7L PowerStroke was released by Ford.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eWalking Away from the Center Support\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe center support on a transmission is a critical component that could make the difference between success or failure. The center support acts as a stabilizer, just as our lower back and abdominal muscles support us. With the TorqShift being such a long unit, over time, the torsional flexing distorts the case, and the center support can sag and become displaced. The TorqShift relies on the center support to also apply fluid feed to the direct and forward clutches. When this distortion occurs, the fluid feed holes for direct and forward can become misaligned. This is especially true when towing heavy loads or under moderate-to-hard acceleration. This will also lead to premature failure and burnt clutches.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast has developed a new No Walk Center Support to correct this issue, which we include in this kit. We also go a step further with this and make a new Mag-Hytec pan standard to increase the rigidity of the case and reduce torsional flexing.\u003c\/p\u003e\r\n\u003cp\u003eWith this now being corrected, the need for the direct solid modification is no longer needed. We originally created this modification before learning about the torsional effect.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 'Wide Load\" Direct Clutch\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack has been a problem child for some time now. With the center support now being corrected, we move your attention to the most problematic area of the 5R110: the direct clutch. In the 5R110, the direct clutch pack has been the topic of so many discussions. In the beginning, we modified the direct clutch solenoid as a result of the fluid flow issues we were seeing and trying to compensate for what we would later find out was the center support walking. Today, many companies still sell these altered solenoids to try to correct a direct clutch issue. We have alleviated this with our new no walk center support.\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack is still one of the most abused clutch packs within the transmission. The direct clutch pack is constantly subjected to conditions that can prematurely wear. To alleviate this, SunCoast has developed our new wide load direct clutch pack. These new clutches are not only made from our SunCoast SCZ carbon graphitic material, but also a larger, wider clutch.\u003c\/p\u003e\r\n\u003cp\u003eMaking the clutch wider effectively increases the mean radius of a clutch, which in turn increases the torque capacity of said clutch. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eThis new wider clutch is also combined with the new wider steel and new wider apply plate. This combination, along with the new and improved No Walk center support, makes this the most loudly engineered kit on the market today.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Billet Ring Gear Hub\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Ford factory ring gear hub has many issues, even in stock form. When we start increasing load on the driveline via additional torque, larger wheels and tires, towing heavy loads or aftermarket tuning, this piece becomes very susceptible to catastrophic failure.\u003c\/p\u003e\r\n\u003cp\u003eThis unit comes with a new billet one-piece ring gear hub. This new billet hub is precision machined out of 4140 HTSR steel. This not only withstands the additional torque, but is also perfect for heavy duty towing applications.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Input Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe factory Ford input shaft is one of the smallest input shafts on the market today. Its lack of size makes for a sore subject with many of our customers after a simple programmer has proven to be too much. With factory wheels and tires, this is a standard replacement for all of our builds. With larger wheels and tire combinations, this becomes essential at stock horsepower\/torque.\u003c\/p\u003e\r\n\u003cp\u003eTire size, gear ratio, and reciprocating mass can all play a role in the amount of torsional fatigue that can occur. Torsional fatigue is one of the largest contributors to premature failure. Fatigue is something that occurs over time after repeated stress. So torsional fatigue is something that occurs over time after repeated stress. It is not so much the overall torque but the accumulation or sum of all the torque that the object has seen over time. SunCoast uses a new billet input shaft that is heat treated and precision ground from 300 maraging steel for maximum held strength. This shaft is a 100% drop-in assembly.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eBillet Planet\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe overdrive planet on the 5R110W is a definite weak link in the higher horsepower applications. This is especially true when you factor in larger wheels and tires.\u003c\/p\u003e\r\n\u003cp\u003eThe billet overdrive planet housing is used in all of our competition 5R110W transmissions. This overdrive planet is precision machined out of 4140 HTSR billet steel. This eliminates both the spline failures, as well as the housing shattering under heavy loads.\u003c\/p\u003e\r\n\u003cp\u003eMean effective radius is the distance from the theoretical center of the friction plate to the center of the friction material. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eInformation such as tire size, gear ratio, and reciprocating mass can all play a role in the torsional fatigue that occurs on these shafts. Torsional fatigue is one of the largest contributors to premature failure that we see. Fatigue is something that occurs over time after repeated stress. It is not so much the overall torque but the \"accumulation\" or \"sum\" of all the torque that the object has been exposed to over time. When you examine the different materials for making these shafts, you will see they come in a variety of grades with a variety of prices. While the more expensive grades such a Maraging, Vascomax, or even the much coveted Aeromet, have a stronger yield rate, they are much more resistant to fatigue.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835585909,"sku":"SC-5R110CAT3","price":10995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642749_0488327a-9565-4994-97a3-774fea43333e.jpg?v=1780953766"},{"product_id":"new-68rfe-solenoid-pack-grey-sc-68rfe-grey","title":"New 68RFE Solenoid Pack (Grey)","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew 68RFE OEM Solenoid Pack\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 24pt;\"\u003e\u003cstrong\u003eGrey solenoids packs came on all the 2011-2018 68RFE transmissions \u0026amp; will only fit these specific year models.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"box-sizing: border-box; font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Valve Body:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe valve body is like the brain of the transmission. It is the single most important item in the transmission. Here at SunCoast, we take a very scientific approach to how we calibrate these units. We start with addressing the accumulator cover plate. It has been shown time and time again that these factory side plates are prone to deflection due to the fact they are made with inferior steel, and a bit thinner than desired. If you start driving line pressure even higher, you will see this issue with deflection become even more prevalent. When this deflection occurs, it often times will cause the screws to loosen, and in some instances even break. SunCoast replaces the factory plate with a thicker, reinforced plate that adds 3 additional holes to allow for additional, stronger mounting screws to keep flex to a minimum. This new accumulator cover plate is standard on all SunCoast 68RFE builds. \u003c\/p\u003e\r\n\u003cp\u003eSunCoast continues the improvements on the valve body circuit by replacing each solenoid pack with a brand new factory OE Mopar solenoid pack. This may be incredibly expensive, but we feel it is an absolute must. While the reasons may be obvious to some, allow me to explain it to you. Every other builder either uses the factory solenoid pack again, or a remanufactured one. Here at SunCoast, this is unacceptable and here is why: It is well documented that the solenoid pack has numerous fail issues. If you have a core that you are building from, more than likely it is there as a core because it failed. When failure occurs, debris, in the way of metals, clutch material, and other contaminants are circulated throughout the transmission. That debris is almost certain to have made its way into the solenoids. This contamination in the solenoids now remains there. So now we take this new, freshly built transmission and introduce the contaminants from the failure into our new unit. Those contaminants can, and will, affect the spray pattern and flow of these solenoids. In the early days, we took the liberty of purchasing a solenoid flow tester to verify the integrity of these solenoids. What we found is that the failure rate was in excess of 60% due to contaminants. Of that 60%, about 10% could be run through the flow tester with a special solvent to clean them enough to restore the spray pattern and flow rate. Our competition may make the argument that they spent the $10,000 + to check and verify these solenoids and clean them, but the only issue with this is that you are still going to have a significant failure rate. SunCoast, as well as Chrysler, has documented that the factory boards on these solenoid packs flex, causing false pressure switch codes. So even if you spent the 5+ hours to restore the flow rate and spray pattern you still have a fatigued board. This could very well cause false codes and drivability issues. SunCoast corrects this by throwing the factory solenoid pack in the trash and replacing it with a new factory unit from Mopar. SunCoast also installs a custom made solenoid spacer-block to correct the flexing issue. Some may tell you that this is overkill, and uneccassary, but we believe it is our duty to ensure that our customers get exactly what they deserve. No corners cut, no shortcuts taken.\u003c\/p\u003e\r\n\u003cp\u003eAnother area of concern in the factory valve body is the issue with the factory solenoid switch valve. These factory pieces allow cross-leaking and continually cause burnt 4C and Overdrive clutches. Very often, it causes the plugs to cock and hang up in the bore. This will result in a failsafe (limp mode), various codes, bind-ups, and burnt TCC clutches. Customers will often complain of the engine stalling, or loss of fuel economy, due to no lock-up. On every one of our SunCoast valve bodies we correct this by replacing the factory solenoid switch valve with a new, custom designed valve made with annular grooves to help center the valve and plugs in the bore to prevent future side-load wear. This special valve is also hard-coat anodized to prevent premature wear. We also have special o-ringed end bore plugs that have been redesigned to ensure cocking can no longer occur. Finally, the next problematic area we correct is the issue with the factory Overdrive\/Underdrive accumulator piston. You will see others attempting to shim these accumulators, trying to correct stroke issues, and they use recalibrated springs to correct the cold driving 1-2 shudder, excessive CVI's, slide shift, etc. The fact that it is plastic doesn't help either. There are companies even making sleeves to try and attempt to fix the bore cross leaking. Our fix is to redesign it. SunCoast uses a custom billet accumulator piston with additional sealing rings, made in-house. This new custom billet overdrive\/underdrive piston not only corrects cross-leaking, but it also changes the stroke of the accumulator, allowing much quicker shifts than could be achieved otherwise. This also extends the life of the overdrive\/underdrive clutches. Is a billet, custom cnc'd accumulator piston really needed? Well if youre SunCoast, the answer is obvious and it is in every one of our valve bodies. What does your builder do?\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835782517,"sku":"SC-68RFE-GREY","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642773.jpg?v=1780953766"},{"product_id":"6l80e-billet-shaft-and-hub-sc-104680-36","title":"6L80E BILLET SHAFT AND HUB","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAn essential upgrade for any hard-working GM 6L80 transmission, Sonnax heavy duty 4-5-6 clutch hub and intermediate shaft 104680-36 guarantees maximum protection against shaft breakage and clutch failure in any vehicle pushing stock components to the limit.\u003c\/p\u003e\r\n\u003cp\u003eIn place of the two-piece shaft\/hub, Sonnax uses a much stronger, one-piece design that eliminates the OE assembly’s weak, welded connection.\u003c\/p\u003e\r\n\u003cp\u003eThe one-piece design is custom forged from ultra high-strength 300M billet steel, then heat treated and shot peened for added durability. This combination of features guards against broken 4-5-6 hubs and the risk of rear splines shearing off — chronic failures in performance cars and trucks as well as heavy commercial vehicles.\u003c\/p\u003e\r\n\u003cp\u003eThe 4-5-6 clutch is released in 1\u003csup\u003est\u003c\/sup\u003e, 2\u003csup\u003end\u003c\/sup\u003e and 3\u003csup\u003erd\u003c\/sup\u003e Gears, and at high RPMs, constant oil flow is required across the spinning clutch frictions to prevent heat build-up and damaged clutches. The unique upgraded design of the Sonnax hub doubles oil flow to the clutches for significantly more protection against heat build-up and clutch failure, especially compared to other aftermarket shafts that reduce oil flow.\u003c\/p\u003e\r\n\u003cp\u003e6L80 transmissions also have a tendency to chirp\/squawk on the 3-4 shift when the 4-5-6 clutch applies. Unlike aftermarket, two-piece shafts that increase the risk of noise by eliminating the OE damper, the heavy-duty Sonnax hub\/shaft can be used with the damper.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRugged, one-piece design eliminates the weak connection where two-piece hub\/shaft assemblies fail\u003c\/li\u003e\r\n\u003cli\u003eHigh-strength, 300M steel forging is heat-treated and shot-peened for maximum durability\u003c\/li\u003e\r\n\u003cli\u003eDoubles oil flow to the clutch pack for greatly improved resistance to heat and longer clutch life\u003c\/li\u003e\r\n\u003cli\u003eDesigned for use with OE dampers to minimize risk of chirp\/squawk\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835749749,"sku":"SC-104680-36","price":835.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198647629_66ad5e95-d5d1-49e1-b641-ed3bbe28a777.jpg?v=1780953929"},{"product_id":"6r140-1-900-rpm-billet-quadralock-torque-converter-6r140-2","title":"6R140 1,900 RPM Billet Quadralock Torque Converter","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6R140 billet captured clutch torque converter tow\/street\/strip\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #ff6600;\"\u003eFeatures and Benefits:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFurnaced brazed fins\u003c\/li\u003e\r\n\u003cli\u003eADCCT Anti Drag Captured Clutch Technology\u003c\/li\u003e\r\n\u003cli\u003eUtilizes factory lock-up clutch damper \u003c\/li\u003e\r\n\u003cli\u003e4140 HTSR billet steel clutch retain ring\u003c\/li\u003e\r\n\u003cli\u003eCNC machined billet forged one piece cover\u003c\/li\u003e\r\n\u003cli\u003eTorrington Thrust bearing design\u003c\/li\u003e\r\n\u003cli\u003eIncreased clutch count\u003c\/li\u003e\r\n\u003cli\u003eQuadralock captured clutch technology\u003c\/li\u003e\r\n\u003cli\u003eLarger apply piston\u003c\/li\u003e\r\n\u003cli\u003eOver 1,000 PSI of additional clamping force\u003c\/li\u003e\r\n\u003cli\u003eUpgraded custom sprag\u003c\/li\u003e\r\n\u003cli\u003eBillet stator for improved efficiency\u003c\/li\u003e\r\n\u003cli\u003eMultiple stall speeds available\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eRevolutionizing this industry isn't easy. SunCoast has done it yet again with our new captured clutch 6R140 torque converter. This revolutionary new converter design is changing the way we look at converter lock-up strategies forever. The captured clutch design converter operates much differently than other conventional torque converters. The captured clutch design eliminates the need to exhaust fluid from the backside of the apply piston. This design allows for much quicker apply rates than what conventionally occurs.\u003c\/p\u003e\r\n\u003cp\u003eWith the multitude of SunCoast custom stator options we can build the perfect converter to address whatever needs you may have. Whether you are looking for an improved stock replacement, or full blown sled pulling rig, we have the ability to build it to your specific needs.\u003c\/p\u003e\r\n\u003cp\u003eThis torque converter is identical to our 6R140-1 with the exception of a different custom stator that allows another 200-300 rpm of additional stall. This converter is still very capable of towing heavy loads, and drivability is identical to stock. This converter is ideal for individuals who have upgraded to a slightly larger turbo and still tow fairly heavy loads. this torque converter will spool much faster than a factory stall speed which makes playing around on the street or at the strip a blast. \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835848053,"sku":"6R140-2","price":3249.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642645.jpg?v=1780953767"},{"product_id":"10r80-xpl-pro-loc-billet-torque-converter-260mm-10r80-xpl-260mm","title":"10R80 XPL  PRO-LOC BILLET TORQUE CONVERTER 260MM","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe new 10R80 XPL Pro-Loc Billet Bolt-Together Torque Converter is manufactured from a solid piece of 7075 T6 billet aluminum plate versus round bar like so many other manufacturers. We take this extra step in manufacturing from solid billet plate due to the superior heat treating characteristics. When using round bar we see the tempering is not as solid in the center as solid plate. While using this type of material increases manufacturing cost, it is a necessary step when considering the high inertia and its effects on ballooning the converter.\u003c\/p\u003e\r\n\u003cp\u003eThe SunCoast Pro-Loc Bolt-Together Converter also includes our patent-pending Zero Drag Lock-up technology with the following benefits:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAllows constant oil flow across the clutch surfaces extracting heat and improving lifespan\u003c\/li\u003e\r\n\u003cli\u003eLess parasitic loss, resulting in more power to the ground\u003c\/li\u003e\r\n\u003cli\u003eQuicker throttle response\u003c\/li\u003e\r\n\u003cli\u003eFaster spooling of aftermarket larger turbochargers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe modular clutch basket assembly allows several clutch configurations allowing maximum tunability. This new modular design allows for unmatched time savings for servicing between rounds to accommodate changing track conditions.\u003c\/p\u003e\r\n\u003cp\u003eTurbine clearance is redesigned to a fixed clearance, with a tighter tolerance reducing slip, allowing for a more efficient torque converter. This fixed turbine clearance also improves consistency and allows two thrust bearings to be used versus the factory phenolic thrust washers.\u003c\/p\u003e\r\n\u003cp\u003eThe sprag assembly is also replaced with our SunCoast Pro-Loc XL sprag that increases bearing roller surface by an additional 15%, improving reliability. Another great feature of this converter is the 3-pass design, allowing for individual control of the converter circuit.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis converter is manufactured with provisions for 8 bolt holes to accommodate our SFI billet flexplate. All of this is clamped together with 16 12-point 5\/16” bolts.\u003c\/p\u003e\r\n\u003cp\u003eAll SunCoast Torque Converters are proudly designed, engineered, and manufactured in-house in Fort Walton Beach, Florida, by American workers.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273835880821,"sku":"10R80-XPL-260MM","price":4195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649157.jpg?v=1780955273"},{"product_id":"suncoast-alto-4l60-65-70e-category-3-rebuild-kit-sc-4l60e-cat3-a","title":"SUNCOAST ALTO 4L60\/65\/70E CATEGORY 3 REBUILD KIT","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThis 4L60E Rebuild Kit Includes the Following:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNew 4L60E Overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eAlto Red Eagle Clutch Kit with Power Packs\u003c\/li\u003e\r\n\u003cli\u003eHigh Performance Kolene Steel Kit\u003c\/li\u003e\r\n\u003cli\u003eNew 4L60E Filter\u003c\/li\u003e\r\n\u003cli\u003eNew 4L60E Bushing Kit\u003c\/li\u003e\r\n\u003cli\u003eNew 4L60E Thrust Washer Kit\u003c\/li\u003e\r\n\u003cli\u003eSonnax 4L60E Performance Pack\u003c\/li\u003e\r\n\u003cli\u003eSonnax Rear Stator Support Bushing\u003c\/li\u003e\r\n\u003cli\u003eSonnax Oversized 2nd Gear Servo\u003c\/li\u003e\r\n\u003cli\u003eBorg Warner Upgraded 29 Element Sprag\u003c\/li\u003e\r\n\u003cli\u003eSonnax 1-2 Pinless Accumulator Piston Kit\u003c\/li\u003e\r\n\u003cli\u003eSonnax .490 Larger Boost Valve\u003c\/li\u003e\r\n\u003cli\u003eHigh Output Pump Slide Spring\u003c\/li\u003e\r\n\u003cli\u003e4th Gear Servo Return Spring\u003c\/li\u003e\r\n\u003cli\u003eSonnax Heavy Duty Smart Shell Kit\u003c\/li\u003e\r\n\u003cli\u003eSonnax Heavy Duty Shift Valve\u003c\/li\u003e\r\n\u003cli\u003eSonnax Input Drum Reinforcement Kit\u003c\/li\u003e\r\n\u003cli\u003eSonnax Smart Tech Input Housing Kit\u003c\/li\u003e\r\n\u003cli\u003e13-Vane Billet Pump Rotor\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Triple Disc Billet 4L60\/65\/70E Converter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe 4L Platform\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe \u003cstrong\u003e4L60\/65\/70E\u003c\/strong\u003eis a series of automatic transmissions from General Motors. Designed for longitudinal engine configurations, the series includes 4 forward gears and 1 reverse gear. The 4L60E is the electronically commanded evolution of the Turbo-Hydromatic 700R4, originally produced in 1982.\u003c\/p\u003e\r\n\u003cp\u003eMost of the 4L60\/65\/70Es you see in service today were originally manufactured in the Toledo, Ohio, plant for General Motors.\u003c\/p\u003e\r\n\u003cp\u003eThese transmissions cannot be differentiated from the outside by the average eye. The 4L65E shares the same exterior parts but has stronger internals, such as 5 pinion planets compared to 4 in the 4L60E. These also can carry several different input shafts depending on which version you have. The early 4L60Es had a 298mm input shaft for non-LS platforms while the later LS models utilized a 300mm one. The later 4L70E also utilized an input speed signal on the input shaft.\u003c\/p\u003e\r\n\u003cp\u003eAn updated 4L60E, the \u003cstrong\u003e4L65E\u003c\/strong\u003e (RPO M32), was phased in the 2001 model year when coupled behind the 6.0 Vortec. Five-pinion front and rear planetaries, along with an additional 3-4 clutches, allowing 7 clutches in the input housing and induction-hardened input shaft assembly, were improved to withstand up to 380 ft-lbs (515 N-m) of torque.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe Category 3 Kit\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis Category 3 SunCoast 4L60\/65\/70E kit has everything you need for a successful high performance rebuild. This kit was designed for customers looking for a complete solution to their 4L60\/65\/70E transmission issues. Aside from all-new electronics, these kits include the same recipe we build with at SunCoast daily.\u003c\/p\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Sonnax Smart Tech Input Housing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eLimitations of the GM 4L60-E, 4L65-E, 4L70-E OE input housing are the root cause of 3-4 burnup in performance applications._\u003c\/div\u003e\r\n\u003cp\u003eThe weak OE backing plate flexes during clutch apply, allowing heat to build up unevenly within the clutch packs limited space. \u003c\/p\u003e\r\n\u003cp\u003eSonnax Smart-Tech input housing kit 77733-06K makes room for a taller clutch pack anchored in place by a stronger backing plate, making it the only way to increase clutch capacity and protect against destructive heat. Numerous other improvements to the housing ensure maximum durability and protection against failure in higher horsepower, higher pressure applications. The housing also is available with a pre-installed, heavy-duty input shaft.\u003c\/p\u003e\r\n\u003cp\u003ePhysically larger clutch pack area for increased 3-4 clutch capacity without sacrificing clutch durability. Use your choice of:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e Eight .067\" frictions with seven .095\" steels\u003c\/li\u003e\r\n\u003cli\u003e Nine .062\" frictions with eight .077\" steels\u003c\/li\u003e\r\n\u003cli\u003e Anchored backing plate keeps clutches parallel to stop the flexing and distortion that leads to heat build-up\u003c\/li\u003e\r\n\u003cli\u003e Treated housing is significantly more resistant to fatigue failure\u003c\/li\u003e\r\n\u003cli\u003e Steel reinforcement sleeve prevents breakage in the spline area\u003c\/li\u003e\r\n\u003cli\u003e Custom backing plate replaces OE retaining ring to eliminate risk of blowout\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Sonnax Overdrive Servo\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eSonnax 4th gear super hold dual servo kit 77767K features 40% more apply surface area for greater holding power in GM 4L60, 4L60-E, 4L65-E and 4L70-E units. Vehicles with these transmissions often exhibit poor 3-4 shift quality and experience band failure in performance applications. Combine this servo kit with Sonnax 2nd gear servo 77911-03K for unmatched holding power and shift performance that's an easy in-vehicle install.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePatented dual-piston design with 40% more apply delivers greater holding power\u003c\/li\u003e\r\n\u003cli\u003eD-ring seals prevent pressure loss\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eUse with OE, Corvette or Sonnax 2nd gear servo assemblies\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe 2nd Gear Servo\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe 2nd gear servo is responsible for applying force to the band via hydraulic pressure. One of the first modifications we often see is the switch to the infamous \"Corvette\" 2nd gear servo. We have learned however that even those have a high failure rate as they were original equipment in the 4L65\/70E transmissions. \u003c\/p\u003e\r\n\u003cp\u003eIn this SunCoast Category Kit we upgrade to the Sonnax Super servo. This servo has an impressive 18% more apply area than the OE \"Corvette\" servo and features a dual seal design, ensuring a more positive band apply\/release and eliminating cross-leaks within the bore.\u003c\/p\u003e\r\n\u003cp\u003eThis new servo is manufactured from billet aluminum and features a chromoly steel apply pin that has added seals to reduce leakage of 3rd gear pressure. This is the fastest band release in the industry.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong style=\"font-size: 12pt;\"\u003eThe Billet Pump Rotor\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe 700R4\/4L60\/65\/70E platforms are notorious for pump cavitation at higher rpms. A typical solution would be to increase pump vanes to allow more fluid volume to be dispense. \u003c\/p\u003e\r\n\u003cp\u003eThe problem lies that as I increase pump vanes the material between vanes is significantly less and less. With cast material this can be a critical failing point. In this Suncoast category kit we are replacing the factory cast piece that is also know for premature failure with a full precision machined billet 13 vane pump rotor. \u003c\/p\u003e\r\n\u003cp\u003eThis pump rotor not only increases fluid volume but adds the reliability and strength needed in a high performance build.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Apply Band\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe 4L60\/65\/70E transmissions utilize an apply band when shifting from 1st to 2nd and again when shifting from 3rd to 4th. This band is wrapped around the reverse input drum that sits directly behind the front pump assembly.\u003c\/p\u003e\r\n\u003cp\u003eThis band is known to be the weakest link in this unit, a problem that becomes even more prominent when you start deleting torque management or adding power modifications. Here at SunCoast with our 4L60\/65\/70E transmission rebuilds, we use a High Performance Alto Red Eagle Wide Band with reinforced band anchors to improve reliability and performance. \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Performance Pack\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Sonnax Performance Pack for GM 4L60E, 4L65E and 4L70E transmissions is a must-have for any heavy-duty vehicle and the very best foundation for high-performance racing. All components work together to carefully tune line pressure, accumulator pressure and shift calibration. It’s the ultimate way to get an impressive transmission that responds to throttle and increased load with quick, firm shifts.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eRear Stator Support Bushing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe original GM 4L60, 4L60E, 4L65E, 4L70E rear stator bushing comes in narrow and wide versions in both common bronze and harder aluminum type materials. All versions commonly fail or wear out prematurely. Available aftermarket replacements typically have a poor quality fit and are also known to wear. \u003cbr\u003e\u003cbr\u003eFor maximum durability, Sonnax offers rear stator support bushing 77002BT-01, a better fitting and extremely wear-resistant, PTFE-lined bushing to stop future wear in its tracks. \u003cbr\u003e\u003cbr\u003eThe Sonnax bushing is the best option for supporting the 20 lb. input housing and for improving the reliability of these common units.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Sprag\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe factory sprag assembly is notorious for flipping and, as a result, causing catastrophic failure to your 4L60E transmission that could be fairly expensive to repair.\u003c\/p\u003e\r\n\u003cp\u003eThis SunCoast 4L60E transmission category rebuild kit comes with an upgraded Borg Warner 29-element sprag with a dual cage design. This dual cage design allows the 29 elements to apply in a more even manner, eliminating the elements from flipping.  \u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eHeavy Duty 2-3 Shift Valve\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eFrom builders to guys playing in the street, we have all experienced repeated spray vehicles. It is a problem that can ruin the best of plans.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eWhen the GM 4L60-E family of transmissions evolved from the 700-R4, the overrun clutch apply no longer applied in 1st and 2nd when accelerating from a stop in D3 shifter position. This change was made to improve coast-down drivability in D3 but had the side effect of reducing the torque capacity of the input section. For greatly improved input sprag and Forward clutch durability, Sonnax heavy-duty shift valve 77754-41 for 4L60-E, 4L65-E and 4L70-E units will apply the overrun clutch in D3 1st, 2nd and 3rd gears.\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eInput Drum Reinforcement Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe General Motors 4L60\/65\/70E input drum assemblies have been known to prematurely fail caused by cracking where the input shaft is pressed into it. This is where the overrun piston rides. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThis fracturing can become even more prevalent in units with larger wheel\/tire combinations and higher torque units where torsional fatigue becomes even more prominent.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe new Sonnax Input Drum Reinforcement Kit (77733-51K) includes a custom-manufactured overrun piston designed for use only with a stamped steel forward piston, eliminating the need to use aluminum forward pistons.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Smartest of all Shells\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003eSmartShell® Heavy-Duty Reaction Shell Kit fixes sun gear shell problems with BRAINS, not just brawn.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eBulky aftermarket shells always fall short when splines continue to strip and the shells break under stress. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eA chronic problem with both OE and thicker aftermarket shells is failure of the rear planetary bearing. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eFrom your daily jobs to extreme builds, the patented SmartShell is the only way to prevent shell failure AND protect the bearing.\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eStripped or cracked shells in GM 700R4, 4L60, 4L60-E, 4L65-E and 4L70-E units are a common problem, but strengthening the shell alone does nothing to address the equally common problem of a failed rear planet captured bearing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eProtecting the Planetary Bearing\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eIn the OE sun gear shell, the thrust load passes from the shell through the sun gear, then overloads the small captured planetary bearing. To protect this bearing, Sonnax took the smart approach and replaced the OE black plastic washer with a large thrust bearing and roller clutch race. This re-routes the thrust load directly to the carrier, completely bypassing the delicate bearing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eStrengthening the Shell\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe SmartShell avoids the substantially increased weight found in other aftermarket shells. The Sonnax approach to improving the shell includes reinforcing the hub area with a laser beam welded collar. A final machining process after welding ensures precision alignment. The SmartShell splines undergo an advanced machining and heat-treating process, and the lugs which engage the drum are heat-treated as well to avoid flaring.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Clutch Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis is a complete 4L60\/65\/70E super rebuild kit containing Alto Red Eagle clutches, with the 3-4 clutch pack that includes 8 clutches. This kit will include everything else you need to rebuild your 4L60E transmission. A new filter is included, as well as a bushing kit and thrust washer kit. The band in the kit is a high performance Red Eagle band.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eAlto Red Eagle\u003csup\u003e®\u003c\/sup\u003e material offers similar mid-point coefficient at high horsepower applications. In addition, the Alto Red Eagle® material gives superior friction wear characteristics at high energy engagements. The leading competitor's material degrades thermally and physically after reaching approximately 2.25 HP\/in2. \u003c\/p\u003e\r\n\u003cp\u003eBelow we offer some engineering data collected with this particular clutch.\u003c\/p\u003e\r\n\u003ch3\u003eSix Level High Energy Test\u003cbr\u003eOn Frictional Properties And Wear\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eLbs.\/Sq. Inch Pressure Required To Stop Flywheel In One Second\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ctable class=\"“table”\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eLevels\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eCycles\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eOEM Manufacturer A\u003cbr\u003ePressure Required (Lbs.\/Sq.In.)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eOEM Manufacturer B\u003cbr\u003ePressure Required (Lbs.\/Sq.In.)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eALTO Red Eagle\u003cbr\u003ePressure Required (Lbs.\/Sq. In.)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e1\u003c\/td\u003e\r\n\u003ctd\u003e10\u003c\/td\u003e\r\n\u003ctd\u003e64\u003c\/td\u003e\r\n\u003ctd\u003e70\u003c\/td\u003e\r\n\u003ctd\u003e66\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e1\u003c\/td\u003e\r\n\u003ctd\u003e100\u003c\/td\u003e\r\n\u003ctd\u003e65\u003c\/td\u003e\r\n\u003ctd\u003e71\u003c\/td\u003e\r\n\u003ctd\u003e65\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e2\u003c\/td\u003e\r\n\u003ctd\u003e10\u003c\/td\u003e\r\n\u003ctd\u003e72\u003c\/td\u003e\r\n\u003ctd\u003e84\u003c\/td\u003e\r\n\u003ctd\u003e74\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e2\u003c\/td\u003e\r\n\u003ctd\u003e100\u003c\/td\u003e\r\n\u003ctd\u003e73\u003c\/td\u003e\r\n\u003ctd\u003e84\u003c\/td\u003e\r\n\u003ctd\u003e74\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e3\u003c\/td\u003e\r\n\u003ctd\u003e10\u003c\/td\u003e\r\n\u003ctd\u003e85\u003c\/td\u003e\r\n\u003ctd\u003e96\u003c\/td\u003e\r\n\u003ctd\u003e86\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e3\u003c\/td\u003e\r\n\u003ctd\u003e100\u003c\/td\u003e\r\n\u003ctd\u003e92\u003c\/td\u003e\r\n\u003ctd\u003e101\u003c\/td\u003e\r\n\u003ctd\u003e93\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e4\u003c\/td\u003e\r\n\u003ctd\u003e10\u003c\/td\u003e\r\n\u003ctd\u003e102\u003c\/td\u003e\r\n\u003ctd\u003e116\u003c\/td\u003e\r\n\u003ctd\u003e104\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e4\u003c\/td\u003e\r\n\u003ctd\u003e100\u003c\/td\u003e\r\n\u003ctd\u003e110\u003c\/td\u003e\r\n\u003ctd\u003e122\u003c\/td\u003e\r\n\u003ctd\u003e108\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e5\u003c\/td\u003e\r\n\u003ctd\u003e10\u003c\/td\u003e\r\n\u003ctd\u003e118\u003c\/td\u003e\r\n\u003ctd\u003e133\u003c\/td\u003e\r\n\u003ctd\u003e117\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e5\u003c\/td\u003e\r\n\u003ctd\u003e100\u003c\/td\u003e\r\n\u003ctd\u003e124\u003c\/td\u003e\r\n\u003ctd\u003e135\u003c\/td\u003e\r\n\u003ctd\u003e118\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e6\u003c\/td\u003e\r\n\u003ctd\u003e10\u003c\/td\u003e\r\n\u003ctd\u003e136\u003c\/td\u003e\r\n\u003ctd\u003e148\u003c\/td\u003e\r\n\u003ctd\u003e131\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e6\u003c\/td\u003e\r\n\u003ctd\u003e100\u003c\/td\u003e\r\n\u003ctd\u003e143\u003c\/td\u003e\r\n\u003ctd\u003e152\u003c\/td\u003e\r\n\u003ctd\u003e134\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The Lower Lbs.\/Sq.In. Required to stop the flywheel, the higher the frictional properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eResults:\u003c\/strong\u003e Pressure required to stop the flywheel on \"ALTO RED EAGLE\" are slightly lower than \"Manufacturer A\" and well below \"Manufacturer B.\"\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eConclusion:\u003c\/strong\u003e The frictional properties of \"ALTO RED EAGLE\" are slightly higher than \"Manufacturer A\" and well above \"Manufacturer B.\"\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ctable class=\"“table”\"\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\u003cstrong\u003eLEVELS\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eINERTIA (lb.-ft.\u003csup\u003e2\u003c\/sup\u003e)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003ctd\u003e\u003cstrong\u003eKINETIC ENERGY (lb.-ft.)\u003c\/strong\u003e\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e1\u003c\/td\u003e\r\n\u003ctd\u003e.261\u003c\/td\u003e\r\n\u003ctd\u003e30,232\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e2\u003c\/td\u003e\r\n\u003ctd\u003e.302\u003c\/td\u003e\r\n\u003ctd\u003e35,048\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e3\u003c\/td\u003e\r\n\u003ctd\u003e.344\u003c\/td\u003e\r\n\u003ctd\u003e39,865\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e4\u003c\/td\u003e\r\n\u003ctd\u003e.385\u003c\/td\u003e\r\n\u003ctd\u003e44,681\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e5\u003c\/td\u003e\r\n\u003ctd\u003e.426\u003c\/td\u003e\r\n\u003ctd\u003e49,498\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e6\u003c\/td\u003e\r\n\u003ctd\u003e.510\u003c\/td\u003e\r\n\u003ctd\u003e59,131\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTest Schedule and Duration:\u003c\/strong\u003e\u003cbr\u003eTest conducted in six energy levels. Each level consists of 100 clutch engagements at 60 second intervals, from 4600 RPM with a clutch lockup time of one second, the indicated pressure required to stop the flywheel in one second.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836044661,"sku":"SC-4L60E-CAT3-A","price":4095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198646882.jpg?v=1780953914"},{"product_id":"68rfe-category-1-450hp-with-converter-sc-68rfe-1","title":"68RFE CATEGORY 1 450HP WITH CONVERTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eFeatures \u0026amp; Benefits\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e- SunCoast Guardian Torque Converter\u003c\/li\u003e\r\n\u003cli\u003e- New Sonnax Smart Tech Overdrive Drum Assembly\u003c\/li\u003e\r\n\u003cli\u003e- New 68RFE Thrust Washer Kit\u003c\/li\u003e\r\n\u003cli\u003e- New 68RFE Thrust Bearing Kit\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Complete Gasket and Sealing Kit\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Spin-on Filter\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Pan Filter\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Underdrive and Overdrive piston set\u003c\/li\u003e\r\n\u003cli\u003e- Upgraded 2C Clutch Set\u003c\/li\u003e\r\n\u003cli\u003e- 68RFE Billet 2C Piston\u003c\/li\u003e\r\n\u003cli\u003e- Suncoast Ducenti Valve body\u003c\/li\u003e\r\n\u003cli\u003e- Suncoast Zero Cavitation filter kit\u003c\/li\u003e\r\n\u003cli\u003e- SunCoast OEM Solenoid Pack \u003c\/li\u003e\r\n\u003cli\u003e- 450 Horsepower\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; color: #eb5f26; font-size: 14pt;\"\u003eThe 68RFE\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe 68RFE transmission is the big brother to the 45\/545RFE transmission. The RFE platform was originally designed by Chrysler and was introduced in 1999 with the debut of the new Jeep Grand Cherokee. \"RFE\" stands for \u003cspan style=\"font-weight: bold;\"\u003eR\u003c\/span\u003eear-wheel drive \u003cspan style=\"font-weight: bold;\"\u003eF\u003c\/span\u003eully \u003cspan style=\"font-weight: bold;\"\u003eE\u003c\/span\u003electronic control. The RFE design was mostly noted in the new design to have 3 planetary sets for a 4-speed transmission in the 45RFE. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cp\u003eIn 2007, Chrysler debuted the new 6.7 Powerplant in the all new Dodge Ram, and Dodge wanted a transmission that was specifically designed for function. The previous platform utilized the Torqueflite 48RE platform and had been around since the late 50's when they released the first 727 in 1956 after purchasing the license from Simpson on the gearset in 1955. \u003c\/p\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe 46\/47\/48 Chrysler platforms were 3 and 4-speed units that were mechanically and hydraulically controlled, with the most notable control system being governor pressure.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe first improvement Chrysler wanted to make over the Torqueflite platform was, obviously, the amount of forward gear. For the 68RFE transmission, Chrysler opted to change to a six-speed unit. The additional gears allowed Chrysler to add higher 1st-gear ratios and tighter shift recovery from one gear to the next. The tighter shift recovery essentially keeps the vehicle in higher averaged horsepower and torque numbers, while also adding torque multiplication.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe gear ratios were increased. as well. The new 68RFE boasts a whopping 3.23:1 first gear, compared to the 2.45:1 first gear found in the previous 47\/48RE platform. Chrysler also increased second gear to a 1.83:1 versus the 1.45:1 found previously. The 68RFE was also given two overdrive gears, with 5th being .81:1 and 6th with the very deep .62:1. The predecessor had a single overdrive that was a .69:1.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; color: #eb5f26; font-size: 14pt;\"\u003eThe Category Transmissions\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe SunCoast Category 68RFE transmissions are designed and developed with intentions of taking a systematic approach to solving the issues with the 68RFE transmission.  We approach each deficiency and need from a scientific approach.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eWe aim to offer you the most complete series of 68RFE transmissions available on the market today. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Smart Tech Drum\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe factory overdrive clutches are at a high risk of failure when towing or installing aftermarket programmers, delete kits, or larger turbos. This is in large part to the fragile and thin (.034) single-sided clutches. When exposed to increased torque or higher temperatures, they will distort, causing additional clearance and uneven apply. This will always result in burnt clutches. These clutches in the overdrive housing are, by far, the weakest link in the 68RFE transmission design.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe Sonnax Smart Tech 68RFE overdrive drum addresses these issues. The new billet clutch housing holds a physically taller clutch pack, allowing the overdrive apply clutch area to increase 16%. In addition to the increased apply surface area, the thicker clutches and steels increase clutch steel mass by 28%, drastically improving the heat dissipation.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe new 68RFE overdrive clutch drum also comes with a top bolt-on plate to help eliminate clutch pack flexing and distortion that contribute to premature failure.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 2C Piston\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe factory molded piston is prone to uneven apply which leads to excessive heat in the clutches and steels creating premature failure. In this 68RFE transmission rebuild kit we replace the factory piston with a much improved billet piece that also allows for one additional clutch further increasing surface apply area.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThese new 68RFE transmissions are designed with the builder in mind, we offer from mild to wild depending on what your needs are.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Ducenti\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eSunCoast is proud to release its new Pro-Loc Ducenti 200psi Shift Calibration Kit for the 68RFE. What we present to you today is not just a haphazardly put together solution but the cumulation of many years of refinement. \u003cbr\u003e\u003cbr\u003eIn this valve body, we address several key issues within this hydraulic circuit using a multi-faceted approach. This kit includes everything you will need to achieve 200psi without any additional tuning and is designed to be a complete drop-in. \u003cbr\u003e\u003cbr\u003eFeatures and benefits of this shift calibration kit include a new pump half, TCC limit valve, TCC switch valve, five billet three-ring accumulator pistons, billet upgraded valve body plate, an upgraded heavy duty accumulator plate, and custom-calibrated spring rates for PR circuit.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Solenoid Pack\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eEvery new Suncoast transmission receives a new OEM solenoid back from Mopar.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eZero Cavitation Filter Kit\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThe factory 68rfe has had many issues with pressure relief check valve system on the transmission pan filters. Initially Chrysler had issues with the plastic filter splitting in half. This was later remedied by adding a pressure relief valve on top of the filter. This later showed to be an issue as the valve would release itself from the filter all together. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThis new bottom feeder filter kit allows the usage of a torqueflite filter. This filter conversion will not only prevent pump cavitation but will allow higher volume of fluid to be passed through the system. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Torque Converter\u003c\/span\u003e\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eThis Guardian SunCoast Torque Converter fits 68RFE transmissions and is engineered to handle all of your every-day duties. Whether you're towing a camper or hauling dirt to a job site, this torque converter is designed to improved vehicle response and give you years of solid, reliable performance. It comes with furnace-brazed fins and hardened turbine splines. The clutches in this converter are carbon-graphitic for precise and accurate lock-up.  \u003cbr\u003e\u003cbr\u003eIf you are looking to increase the performance of the factory unit and looking for a cost-effective solution this is the converter for you. This converter, while great for heavy duty towing and hauling, is it not intended for racing.\u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eWarranty: 3 Year Unlimited Mile\u003c\/div\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836110197,"sku":"SC-68RFE-1","price":8190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198646208_a24fe473-34b1-4cda-a252-7fd09230ab42.jpg?v=1780953771"},{"product_id":"allison-1000-service-kit-deep-pan-a1000-sk-dp","title":"ALLISON 1000 SERVICE KIT (DEEP PAN)","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService Kit for Allison 1000 Series 5-Speed \u0026amp; 6-Speed\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eIncludes: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3 Gallons of SunCoast ATF Fluid\u003c\/li\u003e\r\n\u003cli\u003eDeep Pan Filter\u003c\/li\u003e\r\n\u003cli\u003eSpin on Filter\u003c\/li\u003e\r\n\u003cli\u003eNew genuine Allison transmission pan gasket. These gaskets are reusable many times over.\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836175733,"sku":"A1000-SK-DP","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198660837.jpg?v=1780954145"},{"product_id":"category-0-suncoast-custom-allison-refresh-kit-6-speed-lml-gmax-cat0-lml-kit-lc","title":"CATEGORY 0 SUNCOAST CUSTOM ALLISON REFRESH KIT 6 SPEED LML","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLML 6-SPEED CATEGORY O SUNCOAST BASE REFRESH KIT | CLUTCHES AND STEELS ONLY\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eTHIS KIT IS MEANT TO REFRESH A SUNCOAST CATEGORY KIT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eKit contains the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast custom clutch packs\u003c\/li\u003e\r\n\u003cli\u003eSunCoast custom Steels\u003c\/li\u003e\r\n\u003cli\u003eSpin on filter\u003c\/li\u003e\r\n\u003cli\u003eShallow or Deep Pan Filter (please select option)\u003c\/li\u003e\r\n\u003cli\u003eGasket Kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003eThe SunCoast Category kits utilize the latest proven friction materials and steel technology from industry leading companies such as Alto and Raybestos. SunCoast works directly with these companies to design and manufacture proprietary SunCoast exclusive product lines, giving the end user uncompromised quality throughout the entire transmission. \u003c\/div\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e\r\n\u003cdiv\u003eSunCoast has designed these kits in house to exact specifications for many in tents, including but not limited to towing, sled pulling, racing or simply having a vehicle to get from point A to point B.\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eDesigned for light commercial vehicles in both on highway and public transport applications, Allison Transmission's 1000 and 2000 Series are rated up to 400 horsepower from the factory. Allison 5-speed transmission started in 2001 with GM equipped Duramax engines.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eKit Exclusives:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast proprietary C1, C2, C3, and C4 Alto carbonite frictions\/Raybestos SCZ frictions that contain no center slots. These frictions utilize a waffle pattern in the material to help retain oil helping the clutch cool when not applied.\u003c\/li\u003e\r\n\u003cli\u003eC5 clutches are not included but can be added to your kit upon request.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003eSunCoast Allison series rebuild kits cover all years from 2001-2015 (kit part number dependent upon year). These kits utilize the latest proven friction materials and steel technology from industry leading companies such as Alto and Raybestos. SunCoast works directly with these companies to design and manufacture proprietary SunCoast exclusive product lines, giving the end user uncompromised quality throughout the entire transmission. SunCoast has designed these kits in house to exact specifications for many in tents, including but not limited to towing, sled pulling, racing or simply having a vehicle to get from point A to point B. Not included in this kit but highly recommended by SunCoast is a complete line of billet triple disc torque converters ranging from 1800 stall to approximately 3000 RPM (manufactured in house), 300M billet shaft options, custom valve body options ranging from 5-6 speed conversions and trans brake SFI approved billet steel and aluminum flex-plates, SFI approved transmission jackets and much more.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003eDesigned for light commercial vehicles in both on-highway and public transport applications, Allison Transmissions 1000 and 2000 Series are rated up to a maximum of 224 kW (300 hp) and have up to six speeds available, including two overdrives. Both close and wide ratio gearing are offered.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836208501,"sku":"GMAX-CAT0-LML-KIT-LC","price":1595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642805.jpg?v=1780953813"},{"product_id":"suncoast-category-4-10r80-extra-capacity-rebuild-kit-with-suncoast-pro-loc-valve-body-and-billet-flexplate-sc-10r80-cat4","title":"SUNCOAST CATEGORY 4 10R80 EXTRA CAPACITY REBUILD KIT WITH SUNCOAST PRO-LOC VALVE BODY AND BILLET FLEXPLATE","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCar makers don’t often collaborate on projects, especially when they’re direct competitors. However, looming government fuel economy and emissions mandates can make strange bedfellows. And so, the Ford 10R80 10-speed automatic transmission was born. It was co-developed with General Motors, although Ford took the engineering lead on the design. The mission was to create a 10-speed transmission that could improve both the fuel efficiency and performance of high-horsepower engines. The resulting Ford 10R80 transmission was advanced enough to handle the power of the Ford Mustang GT 5.0 and Ford F150 Raptor, while improving the efficiency of the Ford Expedition and Lincoln Navigator.\u003c\/p\u003e\r\n\u003cp\u003eLike it or not, a CVT transmission is one of the most efficient gearboxes ever invented. Because there are no actual gears, optimal engine speed can be continuously maintained depending on the load. This allows for seamless acceleration under hard throttle and lower fuel consumption when you’re just cruising. On a traditional geared transmission, a certain amount of energy gets lost every time a gear ratio is changed. This penalizes both fuel economy and performance because the engine has to climb back to the RPMs it was just at. The Ford 10R80 10-speed transmission is designed to combine the efficiency benefits of a CVT, with the stepped feel of a traditional automatic transmission.\u003c\/p\u003e\r\n\u003cp\u003eTo create this optimal blend of performance and efficiency, the 10R80 transmission has a wide 7.39 gear ratio spread and a low 4.70 first gear for maximum performance off the line. Even though this Ford 10-speed automatic transmission has such a wide gear ratio, it has extremely small steps between the gears. This means the engine RPM only drops (approximately) 20% with each shift, which keeps the engine in the ideal RPM range to achieve either peak performance or efficiency (much like a CVT transmission). The Ford 10R80 also has three overdrive gears, which it can downshift from very quickly.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e10R80 Transmission Gear Ratios\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eFirst – 4.70\u003cbr\u003eSecond – 2.99\u003cbr\u003eThird – 2.15\u003cbr\u003eFourth – 1.80\u003cbr\u003eFifth – 1.52\u003cbr\u003eSixth – 1.28\u003cbr\u003eSeventh – 1.00\u003cbr\u003eEighth – 0.85\u003cbr\u003eNinth – 0.69\u003cbr\u003eTenth – 0.64\u003cbr\u003eReverse – 4.87\u003c\/p\u003e\r\n\u003cp\u003eAs shown above, this transmission offers a beautiful shift recovery in every gear, which lends itself to the perfect unit for narrow power bands. This allows the use of much larger camshafts in a naturally aspirated application. If you are looking into going to a forced induction setup, this shift recovery allows for larger turbo and AR housing for max performance.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eNewly Designed Thermal Flow Control Filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R80 transmission has a newly designed filter that has two types of media, fine and coarse (medium). The course medium is common in most filters (orange filter paper), and the fine medium filtration (White paper) is the newer material. There is a thermal plate inside the filter that separates the coarse and fine media. When the oil is colder (higher viscosity) at startup, the fluid will flow through both the fine and coarse filter media.\u003c\/p\u003e\r\n\u003cp\u003eAs the fluid heats up (less viscosity), the thermal plate will bend and restrict the coarse media section, directing most of the fluid through the fine media and, therefore, catching more of the finer debris once the fluid is heated giving it a far superior filtration system.\u003c\/p\u003e\r\n\u003cp\u003eThis new SunCoast 10R80 rebuild kit comes with a new factory filter to ensure zero flow issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Clutches \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures, and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli\u003eSmooth engagements\u003c\/li\u003e\r\n\u003cli\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe 10R80 Rebuild Kit and Its Contents \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis is a complete clutch and steel module kit that fits the new Ford 10R80 Transmission. This module kit contains all of the clutches and steels necessary to rebuild your 10R80 transmission. The Ford 10R80 transmission comes standard in the Ford F150, Bronco and the Ford Mustang.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast upgraded 10R80 transmission rebuild kit comes with new Raybestos GPZ clutches, steels, factory OEM filter and high-performance overhaul kit.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast 10R80 rebuild kit contains all the frictions and steels you will need to do a clutch and steel replacement on a 10R80 transmission containing extra capacity \"E\" and \"F\" clutch modules. This 10R80 rebuild kit was designed to be a re-clutch for a stock capacity unit utilizing the Raybestos GPZ paper and high-performance steels.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Expanded Capacity Clutch Modules\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe 10R80 transmission, while a very capable unit, has its deficiencies just like anything else when it is asked to perform outside its original design intention. Since its debut in 2018, Suncoast has been actively involved in the research and development of this new platform. With our active partnership with Raybestos Powertrain, we can now deliver you the very best product to date with the 10R80 platform. The new Suncoast 10R80 transmission expanded capacity clutch modules that are completely drop-in replacements. Absolutely no machining is required.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"D\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIt is not uncommon to see rapid degradation along with premature failure with this clutch pack in even stock form. \u003c\/p\u003e\r\n\u003cp\u003eThe \"D\" clutch is engaged in P, R,1,2,3,4,6,7,8,10. Where the problem lies is in its own clutch responsibilities when engaged in 6th gear as the oncoming clutch. With this responsibility in higher horsepower or more demanding driving situations, it becomes very obvious uptown teardown this clutch has seen its share of abuse.\u003c\/p\u003e\r\n\u003cp\u003eSuncoast provides GPZ friction material, providing higher friction coefficients, increasing torque capacity well beyond the factory limits. This, along with our higher apply pressure with our high-volume 10R80 transmission pump, creates the perfect environment for more reliable shifts. The new Suncoast 10R80 transmission clutch module requires absolutely no machining or modifications to your current unit...we supply everything needed.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"E\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIf the 10R80 transmission had evil twin redheaded stepchildren, the \"E\" clutch would definitely be one of them. This other proverbial thorn in your side would be the \"F\" clutch.\u003c\/p\u003e\r\n\u003cp\u003eThis clutch, the \"E\" clutch in a 10R80 transmission, is engaged in 1,3,5,6,7,8, and 9th. The real issue becomes apparent pretty quickly. This clutch is cycled on 3 times and off 2 times by the time you are in 5th gear. The clutch is on in 1st then cycled off in 2nd, cycled back on in 3rd, then back off in 4th...only to be cycled back on in 5th gear. In higher-horsepower or higher-demand towing and hauling situations, this constant cycling on and off can lead to premature failure. \u003c\/p\u003e\r\n\u003cp\u003eSuncoast has addressed this issue with the 10R80 transmission by improving the clutch friction properties with the New Raybestos GPZ material and increasing clutch capacity by a whopping 20%. This takes the clutch stack-up from a factory 5-clutch stack-up to a 6-clutch stack-up. We are simultaneously addressing the heat issue with both improved friction coefficient as well as increasing surface area. This Suncoast 10R80 transmission \"E\" high capacity comes completely assembled and stacked up with a new (not used) OE machined drum, piston, and backing plate.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eThe \"F\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis clutch is also prone to premature wear as we have seen with other Lepelletier Ravigneaux Gear sets...oncoming clutches in higher gears seem to take the brunt of the beating. With the new 10R80 transmission, the \"F\" clutch is no exception.\u003c\/p\u003e\r\n\u003cp\u003eThe \"F\" clutch is engaged in R,4,5,6,7,8 and 9th. The quickest path to early or premature degradation of this clutch pack is wide-open throttle or heavy-load-indexed 3rd to 4th shifts. This is especially prominent in applications where torque management has been deleted.\u003c\/p\u003e\r\n\u003cp\u003eSuncoast has corrected this issue by adding 25% more capacity to this clutch pack by taking it from 4 clutches to 5 in this particular clutch pack.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e\u003cstrong\u003eThe Pro Loc Valve Body and Pump\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eWith the SunCoast 10R80 Pro Loc valve body, we are addressing several key issues we have seen regarding the 10R80 transmissions. This is not an approach that is simply bumping in more line pressure in hopes of ascertaining more clamping force; it’s a multi-faceted approach addressing several key issues when exposing these units to more demanding driving environments. These range from heavy towing and hauling to street racing and drag racing. \u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eThe factory 10R80 transmission lock-up circuit is an impressive one, in that it can make converter lockup seem somewhat uneventful. The refinement in its engagement is definitely next-level to what we have seen in the past. As nice as this feels in reference to the NVH (Noise Vibration Harshness), when we start introducing situations where the load demands are testing the limits or outside what the vehicle was initially designed for, it can become a huge problem. \u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eIn our SunCoast 10R80 Pro Loc Valve Body, we are specifically looking to decrease the time from initial lock-up apply to zero turbine slip. In doing this, we are changing the lockup circuit by replacing the torque converter clutch (TCC) valve in order to increase lockup holding apply fluid pressure. The lockup oil transition time is also improved by modifying critical oiling circuits for the fluid to reach the TCC clutch, resulting in quicker apply time, and therefore, reducing TCC clutch degradation. By reducing degradation per apply cycle, we are allowing for improved reliability and performance.\u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003e(\u003cstrong\u003e\u003cem\u003eNOTE:\u003c\/em\u003e\u003c\/strong\u003e For maximum results in power levels exceeding 800HP, it is highly recommended that the TCC apply offset be changed in the factory file calibration)\u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eThe next facet we address is the lube circuit. The lube circuit on the 10R80 transmission is responsible for supplying oil to the planets, clutches, bushings, etc. From the factory, the lube circuit oil is dispersed throughout the transmission as low as 6 PSI. Under normal load demands, this is perfectly acceptable. In more stressful and demanding situations, an increase in lubrication to clutches, steels, and planets is ideal for removing heat and dealing with the increased demands. \u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eIn our 10R80 Valve Body we are specifically addressing this circuit from 6 PSI to a whopping 20 PSI. This is a 250% improvement from the factory calibration, resulting in reduced frictional heat generated. This reduction in heat helps lessen premature failure that can become increasingly evident in high-horsepower applications.\u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eAnother modification to our SunCoast Pro Loc 10R80 Valve Body involves the regulator valve (latch valve) circuit. This oil circuit is responsible for fully engaging the clutches, allowing for full clutch line pressure. In factory form, the regulator valve we are specifically targeting is responsible for A, B, C, and F clutch packs. Of course, our primary clutch pack concern is the 'F\" clutch, which tends to be the first and most prominent clutch pack failure with the 10R80 in higher horsepower or more demanding environments.\u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eIn a factory 10R80 valve body calibration, the regulator valve (latch valve) becomes fully engaged, allowing full fluid flow for engagement at 120 psi. When this occurs, the oncoming clutch pack has maximal clamping force. When the clamping force is engaged to max capacity, we ascertain the greatest static and dynamic holding capacity. In stock form or even mildly modified vehicles, this is perfectly suitable; however, when we expose the vehicle to a more demanding environment this can be a weak link.\u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eWith our SunCoast 10R80 Valve Body, we are decreasing the required pressure to fully engage the regulator to only 80psi. This is a 33% decrease in pressure needed to maximally engage the clutch regulator valve (latch valve) resulting in a quicker shift apply when engaging clutches A, B, C and F. This quicker engagement not only shortens shift times, but it also decreases the heat resonating in the clutch pack, preventing premature degradation and extending clutch life. To improve this shift calibration even more, SunCoast is evacuating non-critical oil to increase apply rate.\u003c\/p\u003e\r\n\u003cp style=\"font-weight: 400;\"\u003eThe factory overall line pressure is modified on this new SunCoast pump\/valve body combo. SunCoast is increasing overall main line pressure as much as 60psi. This additional line pressure not only increases the maximal clamping force of the individual clutch packs but also increases overall pump volume production. To reduce the potential for runaway pressure and the over-compression of clutch fibers, the SunCoast 10R80 Valve Body has a built-in bypass, dumping excessive pressure above 420psi.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased Line Pressure, as much as 60psi\u003c\/li\u003e\r\n\u003cli\u003eIncreased clamping force on all clutch packs\u003c\/li\u003e\r\n\u003cli\u003e250% Increase in Cooler Charge Pressure\u003c\/li\u003e\r\n\u003cli\u003eIncreased Lock-up Apply Pressure\u003c\/li\u003e\r\n\u003cli\u003e33% Decrease in Maximal Pressure Actuation of Clutch Packs\u003c\/li\u003e\r\n\u003cli\u003eShortened Shift Times\u003c\/li\u003e\r\n\u003cli\u003eImproved Clutch Wear  \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe Flex Plate\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe new 10-speed platform that resides in the Coyote-powered vehicles is nothing short of spectacular. Ford has blessed us with a plethora of gears that allow this new Coyote engine to stay exactly where it shines, singing right up top.\u003c\/p\u003e\r\n\u003cp\u003eIt goes without saying that it just seems inherent to human nature not to push what the manufacturer has so graciously given us. As with anything else, if you make it, we find a way to break it.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast is proud to bring to you our new billet 10R80 one-piece solid flexplate. This new 10R80 flexplate is manufactured from 4140 forged billet steel. It features a solid one-piece design with an integrated ring gear that has been heat-treated and oil-quenched for years of reliable service.\u003c\/p\u003e\r\n\u003cp\u003eThis new SunCoast 10R80 flexplate is also almost twice the thickness of the factory unit. This additional thickness and improvement in manufacturing material render deflection virtually non-existent.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast has also designed this 10R80 flexplate with twice the bolt holes, allowing you to take advantage of the additional clamping opportunities that come with our SunCoast 10R80 Pro-Loc Bolt-together Converter. These additional clamping points not only ensure zero deflection but also reduce the chance of shearing in high horsepower applications.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast engineered this flexplate with a relief ring, which prevents imparting deflection of the crankshaft trigger wheel pulse ring. This deflection of the pulse ring is a known issue in higher RPM applications.\u003c\/p\u003e\r\n\u003cp\u003eFinally, this new SunCoast billet 10R80 flexplate is SFI-certified to a rating of 29.2. That is over 11,000 RPMs and 1,700 plus horsepower. This billet 10R80 flexplate is the toughest thing this side of Bangladesh. We guarantee it.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 14pt;\"\u003eFeatures \u0026amp; Benefits: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSFI-certified 29.2\u003c\/li\u003e\r\n\u003cli\u003e4140 forged, billet steel, one-piece construction\u003c\/li\u003e\r\n\u003cli\u003eClamping doubled when used with SunCoast ProLoc Converter\u003c\/li\u003e\r\n\u003cli\u003eIntegrated heat-treated oil-quenched ring gear\u003c\/li\u003e\r\n\u003cli\u003eThicker construction, reducing deflection\u003c\/li\u003e\r\n\u003cli\u003eRedesigned relief ring, eliminating pulse ring at high RPMs\u003c\/li\u003e\r\n\u003cli\u003eLooks tougher than Chuck Norris's chin\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/U1KKt9RSsPk\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/pKBXMSpQnrw\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836274037,"sku":"SC-10R80-CAT4","price":4995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648850.jpg?v=1780954003"},{"product_id":"sonnax-smart-shell-kit-sc-77749-02k","title":"Sonnax Smart Shell kit","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eREACTION SHELL KIT\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eFEATURES AND BENEFITS:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHeavy Duty Reaction Shell\u003c\/li\u003e\r\n\u003cli\u003eEnclosed Thrust Bearing\u003c\/li\u003e\r\n\u003cli\u003eCustom Roller Clutch Race\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\r\n\u003cli\u003eStops Spline Stripping\u003c\/li\u003e\r\n\u003cli\u003ePrevents Hub Breakage\u003c\/li\u003e\r\n\u003cli\u003eEliminates Planet Bearing Failure\u003c\/li\u003e\r\n\u003cli\u003eFits 4L60, 4L60-E, 4L65-E, 4L70-E\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cp\u003eSmartShell® Heavy-Duty Reaction Shell Kit fixes sun gear shell problems with BRAINS, not just brawn.\u003c\/p\u003e\r\n\u003cp\u003eBulky aftermarket shells always fall short when splines continue to strip and the shells break under stress.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eA chronic problem with both OE and thicker aftermarket shells is failure of the rear planetary bearing.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eFrom your daily jobs to extreme builds, the patented SmartShell is the only way to prevent shell failure AND protect the bearing.\u003c\/p\u003e\r\n\u003cp\u003eStripped or cracked shells in GM 700R4, 4L60, 4L60-E, 4L65-E and 4L70-E units are a common problem, but strengthening the shell alone does nothing to address the equally common problem of a failed rear planet captured bearing.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 14pt; font-weight: bold; color: #eb5f26;\"\u003eProtecting the Planetary Bearing\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eIn the OE sun gear shell, the thrust load passes from the shell through the sun gear, then overloads the small captured planetary bearing. To protect this bearing, Sonnax took the smart approach and replaced the OE black plastic washer with a large thrust bearing and roller clutch race. This re-routes the thrust load directly to the carrier, completely bypassing the delicate bearing.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eStrengthening the Shell\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe SmartShell avoids the substantially increased weight found in other aftermarket shells. The Sonnax approach to improving the shell includes reinforcing the hub area with a laser-beam-welded collar. A final machining process after welding ensures precision alignment. The SmartShell splines undergo an advanced machining and heat-treating process, and the lugs that engage the drum are heat-treated, as well, to avoid flaring.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836372341,"sku":"SC-77749-02K","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198646074_77c262b8-56a5-40a8-a00d-05b2d7cd94e1.jpg?v=1780953814"},{"product_id":"6r140-2-300-rpm-billet-quadralock-torque-converter-6r140-3","title":"6R140 2,300 RPM Billet Quadralock Torque Converter","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e6R140 billet captured clutch torque converter tow\/street\/strip\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #ff6600;\"\u003eFeatures and Benefits:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFurnaced brazed fins\u003c\/li\u003e\r\n\u003cli\u003eADCCT Anti Drag Captured Clutch Technology\u003c\/li\u003e\r\n\u003cli\u003eUtilizes factory lock-up clutch damper \u003c\/li\u003e\r\n\u003cli\u003e4140 HTSR billet steel clutch retain ring\u003c\/li\u003e\r\n\u003cli\u003eCNC machined billet forged one piece cover\u003c\/li\u003e\r\n\u003cli\u003eTorrington Thrust bearing design\u003c\/li\u003e\r\n\u003cli\u003eIncreased clutch count\u003c\/li\u003e\r\n\u003cli\u003eQuadralock captured clutch technology\u003c\/li\u003e\r\n\u003cli\u003eLarger apply piston\u003c\/li\u003e\r\n\u003cli\u003eOver 1,000 PSI of additional clamping force\u003c\/li\u003e\r\n\u003cli\u003eUpgraded custom sprag\u003c\/li\u003e\r\n\u003cli\u003eBillet stator for improved efficiency\u003c\/li\u003e\r\n\u003cli\u003eMultiple stall speeds available\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eRevolutionizing this industry isn't easy. SunCoast has done it yet again with our new captured clutch 6R140 torque converter. This revolutionary new converter design is changing the way we look at converter lock-up strategies forever. The captured clutch design converter operates much differently than other conventional torque converters. The captured clutch design eliminates the need to exhaust fluid from the backside of the apply piston. This design allows for much quicker apply rates than what conventionally occurs.\u003c\/p\u003e\r\n\u003cp\u003eWith the multitude of SunCoast custom stator options we can build the perfect converter to address whatever needs you may have. Whether you are looking for an improved stock replacement, or full blown sled pulling rig, we have the ability to build it to your specific needs.\u003c\/p\u003e\r\n\u003cp\u003eThis torque converter is identical to our 6R140-2 with the exception of a different custom stator that allows another 200-300 rpm of additional stall. This converter is still very capable of towing heavy loads, and drivability is identical to stock. This converter is ideal for individuals who have upgraded to a slightly larger turbo and still tow fairly heavy loads. this torque converter will spool much faster than a factory stall speed which makes playing around on the street or at the strip a blast. \u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836339573,"sku":"6R140-3","price":3249.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642767.jpg?v=1780953814"},{"product_id":"as69rc-pml-deep-pan-cast-aluminum-finish-sc-as69-da","title":"AS69RC PML DEEP PAN - CAST ALUMINUM FINISH","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAS69RC PML DEEP PAN \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; color: #eb5f26;\"\u003e\u003cstrong\u003eFeatures Include The Following:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased oil capacity for cooler temperatures\u003c\/li\u003e\r\n\u003cli\u003eSand-cast aluminum with raised fins\u003c\/li\u003e\r\n\u003cli\u003e3\/16-inch thick wall construction to add strength to the transmission case\u003c\/li\u003e\r\n\u003cli\u003e3\/8-inch thick gasket flange will not bend when bolts are tightened\u003c\/li\u003e\r\n\u003cli\u003eMachined gasket surface for a secure seal\u003c\/li\u003e\r\n\u003cli\u003eBoss cast into pan can be machined for a temperature sensor\u003c\/li\u003e\r\n\u003cli\u003eDrain hole and magnetic drain plug for easier, less messy maintenance\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003eThe Aisin AS69RC transmission is found in 2013 and newer Ram 3500, 4500, 5500 trucks with the 6.7 Cummins Diesel. This PML pan features heavy duty construction, extra capacity, drain, and cooling fins. PML designed this pan to provide as much clearance as possible to the bolts at the rear of the pan. There is a cross member below these bolts and to access them on the stock pan or the PML pan, you will probably need to jack up the transfer case. This pan works with the stock gasket and filter. PML provides new mounting bolts and a magnetic drain plug with the pan.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836405109,"sku":"SC-AS69-DA","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642971_0fd11273-2971-4df7-baa9-30a51e126d4e.jpg?v=1780953816"},{"product_id":"allison-p2-planet-without-sungear-a1-p2k-6","title":"ALLISON P2 PLANET WITHOUT SUNGEAR","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALLISON P2 PLANET\/SG C2 CAP\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eP2 heat treated Plane tary fix kit Contains (1) Machined P2 Planetary. The stock Allison 1000 P2 Planetary can strip or snap as a result of poor tuning,shock load, improperly built transmissions and higher horsepower applications and can cause catastrophic failure and\/or immobility. The SunCoast P2 Planetary fix is the solution to this issue. This item is highly recommended for higher horsepower applications, including sled pulling, drag racing, as well as heavy duty towing (to accept billet P2 hub, machine work required on the P1 sun gear).\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4140 Billet steel\u003c\/li\u003e\r\n\u003cli\u003eInduction heat treated\u003c\/li\u003e\r\n\u003cli\u003eThis does not include a C2 clutch hub Planetary core deposit ($800.00) is required if pre-shipped (planet must be build able to receive core deposit back)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836568949,"sku":"A1-P2K-6","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642618.jpg?v=1780953816"},{"product_id":"suncoast-category-4-700hp-suncoast-5r110-rebuild-kit-with-triple-disc-billet-torque-converter-sc-5r110sc-4","title":"SunCoast Category 4 700HP+ SunCoast 5R110 Rebuild Kit With Triple Disc Billet Torque Converter","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSUNCOAST 700HP+ CATEGORY 4 5R110 REBUILD KIT W\/ BILLET AEROMET INPUT SHAFT, BILLET INTERMEDIATE SHAFT, BILLET REAR RING GEAR HUB, BILLET REAR PLANET, NO WALK CENTER SUPPORT AND SUNCOAST DIRECT POWERPACK\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eKit includes the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast Low\/Reverse clutch pack\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive clutch pack\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive pressure plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate clutch pack\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate pressure plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward clutch pack\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward pressure plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast \"Wide Load\" direct clutch pack\u003c\/li\u003e\r\n\u003cli\u003eSuncoast Direct pressure plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct snap ring\u003c\/li\u003e\r\n\u003cli\u003eSunCoast \"No Walk\" Center Support\u003c\/li\u003e\r\n\u003cli\u003eSuncoast overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Thrust Washer Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Thrust Bearing Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Bushing Kit\u003c\/li\u003e\r\n\u003cli\u003eSunCoast valve body calibration kit\u003c\/li\u003e\r\n\u003cli\u003eBillet Intermediate Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Aeromet Input Shaft\u003c\/li\u003e\r\n\u003cli\u003eBillet Rear Ring Gear Hub\u003c\/li\u003e\r\n\u003cli\u003eBillet Overdrive Planet\u003c\/li\u003e\r\n\u003cli\u003eTriple Disc Billet Torque Converter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003eTales from the 5R110 \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Torqshift 5-speed 5R110 transmission replaces the old faithful 4-speed 4R100 in the 2003 model year with the introduction of the new 6.0L diesel engine. The Torqshift design, in fact, has a total of six forward gears ratios, however only 5 are advertised. The \"hidden gear\" is only used in very cold weather. The 5 forward ratios are: 3.11, 2.22, 1.55, 1.00, and finally overdrive is .71. The Torqshift also utilizes an optional 4th gear, which is 1.10, that is used in cold start conditions to aid in engine and transmission warm up.\u003c\/p\u003e\r\n\u003cp\u003eWith the Torqshift, once the Tow \/ Haul mode is activated, it can help increase driver control when towing large loads up and down steep grades. It will also minimize shifts and maximize the available torque. Upon descent, the tow\/haul feature utilizes engine braking to help extend the life of the transmission and improves driver control.\u003c\/p\u003e\r\n\u003cp\u003eThe Torqshift was also Ford's first attempt at adaptive control. The adaptive control shift function monitors the performance over its lifetime and adjusts shift times in real time to assure consistency and to compensate for wear. The Torqshift was also used with the 6.4L as well. This transmission was later replaced with the much larger and more robust 6R140 when the 6.7L Powerstroke was released by Ford.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eWalking Away from the Center Support. . . \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe center support on a transmission is a critical component that could make the difference between success or failure. The center support acts as a stabilizer, just as our lower back and abdominal muscles support us. With the Ford 5R110 transmission being such a long unit, over time the torsional flexing distorts the case, and the center support can sag and become displaced. The 5R110 transmission relies on the center support to also apply fluid feed to the direct and forward clutches. When this distortion occurs, the fluid feed holes for direct and forward can become misaligned. This is especially true when towing heavy loads or under moderate to hard acceleration. This will also lead to premature failure and burnt clutches.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast has developed a new \"No Walk\" center support to correct this issue, which we include in this kit. We also go a step further with this and make a new Mag-Hytec pan standard to increase the rigidity of the case and reduce torsional flexing.\u003c\/p\u003e\r\n\u003cp\u003eWith this now being corrected the need for the direct solenoid modification is no longer needed. We originally created this modification before learning about the torsional effect.\u003c\/p\u003e\r\n\u003cp\u003eThis 5R110 transmission rebuild kit includes this new patent pending center support.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 'Wide Load\" Direct Clutch\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack has been a problem child for some time now. With the center support now being corrected, we move your attention to the most problematic area of the 5R110, the direct clutch. In the 5R110 the direct clutch pack has been the topic of so many discussions. In the beginning we modified the direct clutch solenoid. We did this as a result of the fluid flow issues we were seeing, trying to compensate for what we would later find out was the center support walking. Today many companies still sell these altered solenoids to try to correct a direct clutch issue. We have alleviated this with our new no walk center support.\u003c\/p\u003e\r\n\u003cp\u003eMoving forward the direct clutch pack is still one of the most abused clutch packs within the transmission. The direct clutch pack is constantly subjected to conditions that can prematurely wear. To alleviate this SunCoast has developed our new \"wide load\" direct clutch pack. These new clutches are not only made from our SunCoast SCZ carbon graphitic material but a larger wider clutch as well.\u003c\/p\u003e\r\n\u003cp\u003eMaking the clutch wider effectively increases the mean radius of a clutch, increasing the mean radius increases the torque capacity of said clutch. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eThis new wider clutch is also combined with the new wider steel and new wider apply plate. This combination along with the new and improved \"No Walk\" center support make this the most loudly engineered kit on the market today.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Input Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eIn most of our 5R110 transmission rebuild kits we typically use a 300 Maraging billet steel, however in this particular SunCoast 5R110 transmission rebuild kit we upgrade to an aeromet material for the input shaft. \u003c\/p\u003e\r\n\u003cp\u003eThe aeromet input shaft is much stronger than the Vascomax material. This added streangth helps resists sheer breaking which so common in the 5R110 transmission due to the smaller shaft size. A sheer break typically occurs with excessive power or the rapid loading and unloading of the transmission. This phenomenon is pretty common with wheel hop.\u003c\/p\u003e\r\n\u003cp\u003eThe Aeromet material also is much more resistant to torsional fatigue breakage. Fatigue breaks are pretty common in applications that include heavy towing and hauling.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Billet Ring Gear Hub\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Ford factory ring gear hub has many issues even in stock form. When we start increasing load on the driveline via additional torque, larger wheels and tires, towing heavy loads or aftermarket tuning this piece becomes very susceptible to catastrophic failure. \u003c\/p\u003e\r\n\u003cp\u003eThis unit comes with a new billet one piece ring gear hub. This new billet hub is precision machined out of 4140 HTSR steel. This not only withstands the additional torque but is perfect for heavy duty towing applications.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eBillet Planet\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe overdrive planet on the 5R110W is a definite weak link in the higher horsepower applications. This is especially true when you factor in larger wheels and tires. \u003c\/p\u003e\r\n\u003cp\u003eThe billet overdrive planet housing is used in all of our competition 5R110W transmissions. This overdrive planet is precision machined out of 4140 HTSR billet steel. This eliminates both the spline failures as well as the housing shattering under heavy loads. \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Intermediate Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Ford 5R110 transmission has been known to strip the splines out on the intermediate shaft in even stock applications. It is also a well know fact that the intermediate shaft on these will fracture and sheer completely causing catastrophic failure within the unit. This problem is further agitated by the addition of larger tires, aftermarket performance modifications, and heavy towing\/hauling. When these shafts due break the collateral damage as a result can be very expensive.\u003c\/p\u003e\r\n\u003cp\u003eIn the SunCoast Category 4 5R110 transmission rebuild kit we upgrade the intermediate shaft to a precision machined billet steel shaft. This shaft is manufactured using 300m steel that has been heat treated for increased strength and reliability. This 5R110 billet intermediate shaft has also had the radius increased in critical load areas to withstand the additional loads.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 14pt; color: #eb5f26;\"\u003e\u003cem\u003eThe SunCoast \"SC\" Kits are designed to offer our proven recipes to our end users with the most comprehensives kits on the market today. These recipes include all of the custom SunCoast stack ups that allow you to build these units in the same fashion we do. \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-family: 'Source Sans Pro', sans-serif; font-size: 16.799999237060547px; background-color: #ffffff;\"\u003eMean effective radius is the distance from the theoretical center of the friction plate to the center of the friction material. \u003c\/span\u003e\u003cspan style=\"font-family: 'Source Sans Pro', sans-serif; font-size: 16.799999237060547px; background-color: #ffffff;\"\u003eWhat this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/span\u003e\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836536181,"sku":"SC-5R110SC-4","price":8394.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642726.jpg?v=1780953817"},{"product_id":"suncoast-category-1-450-hp-suncoast-5r110-transmission-4wd-no-converter-sc-5r110cat1-lc","title":"SunCoast Category 1 450 HP SunCoast 5R110 Transmission 4WD NO CONVERTER","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSUNCOAST 450 HP CATEGORY 1 UPGRADED 5R110 TRANSMISSION W\/ BILLET VASCOMAX INPUT SHAFT, NO WALK CENTER SUPPORT AND SUNCOAST DIRECT POWERPACK\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003e5R110 transmission includes the following:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSunCoast Low\/Reverse Clutch Pack with 6 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Clutch Pack with 5 Clutches \u0026amp; 4 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overdrive Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Clutch Pack with 5 Clutches \u0026amp; 5 Kolene Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Intermediate Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Forward Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Wide Load Direct Clutch Pack with 5 Frictions \u0026amp; 5 Steels\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Pressure Plate\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Piston\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Direct Snap Ring\u003c\/li\u003e\r\n\u003cli\u003eSunCoast No Walk Center Support\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Valve Body Calibration Kit\u003c\/li\u003e\r\n\u003cli\u003eBillet Vascomax Input Shaft\u003c\/li\u003e\r\n\u003cli\u003eMag-Hytec Deep Pan\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003eThe SunCoast Category 1 transmission is our entry level heavy duty transmission. We use our custom clutch power packs to improve both reliability and performance. In this 5R110 transmission, we perform all of our valve body modifications to ensure clean, accurate shifting. This receives a host of other improvements explained as well, most notably a new 5R110 billet input shaft. This is a perfect build for a mildly modified daily driver thats doubles as a tow rig, as well.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #eb5f26; font-size: 14pt; font-weight: bold;\"\u003eTales from the 5R110\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe TorqShift 5-speed 5R110 transmission replaces the old faithful 4-speed 4R100 in the 2003 model year with the introduction of the new 6.0L diesel engine. The TorqShift design, in fact, has a total of six forward gears ratios; however, only five are advertised, with the hidden gear only being used in very cold weather. The five forward ratios are: 3.11, 2.22, 1.55, 1.00, andfinallyoverdrive is 0.71. The TorqShift also utilizes an optional 4th gear at 1.10, which is used in cold start conditions to aid in engine and transmission warm up.\u003c\/p\u003e\r\n\u003cp\u003eWith the TorqShift, once the Tow\/Haul mode is activated, it can help increase driver control when towing large loads up and down steep grades. It will also minimize shifts and maximize the available torque. Upon descent, the tow\/haul feature utilizes engine braking to help extend the life of the transmission and improves driver control.\u003c\/p\u003e\r\n\u003cp\u003eThe TorqShift was also Fords first attempt at adaptive control. The adaptive control shift function monitors the performance over its lifetime and adjusts shift times in real time to ensure consistency and compensate for wear. The TorqShift was also used with the 6.4L. This particular transmission was later replaced with the much larger and more robust 6R140 when the 6.7L PowerStroke was released by Ford.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eWalking Away from the Center Support\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe center support on a transmission is a critical component that could make the difference between success or failure. The center support acts as a stabilizer, just as our lower back and abdominal muscles support us. With the TorqShift being such a long unit, over time, the torsional flexing distorts the case, and the center support can sag and become displaced. The TorqShift relies on the center support to also apply fluid feed to the direct and forward clutches. When this distortion occurs, the fluid feed holes for direct and forward can become misaligned. This is especially true when towing heavy loads or under moderate-to-hard acceleration. This will also lead to premature failure and burnt clutches.\u003c\/p\u003e\r\n\u003cp\u003eSunCoast has developed a new No Walk Center Support to correct this issue, which we include in this kit. We also go a step further with this and make a new Mag-Hytec pan standard to increase the rigidity of the case and reduce torsional flexing.\u003c\/p\u003e\r\n\u003cp\u003eWith this now being corrected, the need for the direct solid modification is no longer needed. We originally created this modification before learning about the torsional effect.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe 'Wide Load\" Direct Clutch\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack has been a problem child for some time now. With the center support now being corrected, we move your attention to the most problematic area of the 5R110: the direct clutch. In the 5R110, the direct clutch pack has been the topic of so many discussions. In the beginning, we modified the direct clutch solenoid as a result of the fluid flow issues we were seeing and trying to compensate for what we would later find out was the center support walking. Today, many companies still sell these altered solenoids to try to correct a direct clutch issue. We have alleviated this with our new no walk center support.\u003c\/p\u003e\r\n\u003cp\u003eThe direct clutch pack is still one of the most abused clutch packs within the transmission. The direct clutch pack is constantly subjected to conditions that can prematurely wear. To alleviate this, SunCoast has developed our new wide load direct clutch pack. These new clutches are not only made from our SunCoast SCZ carbon graphitic material, but also a larger, wider clutch.\u003c\/p\u003e\r\n\u003cp\u003eMaking the clutch wider effectively increases the mean radius of a clutch, which in turn increases the torque capacity of said clutch. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eThis new wider clutch is also combined with the new wider steel and new wider apply plate. This combination, along with the new and improved No Walk center support, makes this the most loudly engineered kit on the market today.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold; font-size: 14pt; color: #eb5f26;\"\u003eThe Input Shaft\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe factory Ford input shaft is one of the smallest input shafts on the market today. Its lack of size makes for a sore subject with many of our customers after a simple programmer has proven to be too much. With factory wheels and tires, this is a standard replacement for all of our builds. With larger wheels and tire combinations, this becomes essential at stock horsepower\/torque.\u003c\/p\u003e\r\n\u003cp\u003eTire size, gear ratio, and reciprocating mass can all play a role in the amount of torsional fatigue that can occur. Torsional fatigue is one of the largest contributors to premature failure. Fatigue is something that occurs over time after repeated stress.  So torsional fatigue is something that occurs over time after repeated stress. It is not so much the overall torque but the accumulation or sum of all the torque that the object has seen over time. SunCoast uses a new billet input shaft that is heat treated and precision ground from 300 maraging steel for maximum held strength. This shaft is a 100% drop-in assembly.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"color: #eb5f26;\"\u003e* NOTE * TORQUE CONVERTER AND DEEP PAN SOLD SEPARATELY\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003eMean effective radius is the distance from the theoretical center of the friction plate to the center of the friction material. What this means is the larger the mean effective radius, the more torque load capacity the friction plate can handle.\u003c\/p\u003e\r\n\u003cp\u003eInformation such as tire size, gear ratio, and reciprocating mass can all play a role in the torsional fatigue that occurs on these shafts. Torsional fatigue is one of the largest contributors to premature failure that we see. Fatigue is something that occurs over time after repeated stress. It is not so much the overall torque but the \"accumulation\" or \"sum\" of all the torque that the object has been exposed to over time. When you examine the different materials for making these shafts, you will see they come in a variety of grades with a variety of prices. While the more expensive grades such a Maraging, Vascomax, or even the much coveted Aeromet, have a stronger yield rate, they are much more resistant to fatigue.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836634485,"sku":"SC-5R110CAT1-LC","price":7900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198648341_97b6a34d-ac5b-4efb-aa75-d0bc4f0d550a.jpg?v=1780953969"},{"product_id":"10r140-transmission-category-2-expanded-capacity-sc-10r140-cat2d","title":"10R140 Transmission Category 2 Expanded Capacity","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCar makers don’t often collaborate on projects, especially when they’re direct competitors. However, looming government fuel economy and emissions mandates can make strange bedfellows. And so, the Ford 10R140 10-speed automatic transmission was born. It was co-developed with General Motors, although Ford apparently took the engineering lead on the design. The mission was to create a 10 speed transmission that could improve both the fuel efficiency and performance of high-horsepower engines. The resulting Ford 10R140 transmission was advanced enough to handle the power of the Ford F-250, F-350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eLike it or not, a CVT transmission is one of the most efficient gearboxes ever invented. Because there are no actual gears, optimal engine speed can be continuously maintained depending on the load. This allows for seamless acceleration under hard throttle, and lower fuel consumption when you’re just cruising. On a traditional geared transmission, a certain amount of energy gets lost every time a gear ratio is changed. This penalizes both fuel economy and performance, because the engine has to climb back to the RPMs it was just at. The Ford 10R140 10-speed transmission is designed to combine the efficiency benefits of a CVT, with the stepped feel of a traditional automatic transmission.\u003c\/p\u003e\r\n\u003cp\u003eTo create this optimal blend of performance and efficiency, the 10R140 transmission has a wide 7.39 gear ratio spread and a low 4.70 first gear for maximum performance off-the-line. Even though this Ford 10 speed automatic transmission has such a wide gear ratio, it has extremely small steps between the gears. This means the engine RPM only drops (approximately) 20% with each shift, which keeps the engine in the ideal RPM range to achieve either peak performance or efficiency (much like a CVT transmission). The Ford 10R140 also has three overdrive gears, which it can downshift from very quickly.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e10R140 Transmission Gear Ratios\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eFirst – 4.70\u003cbr\u003eSecond – 2.99\u003cbr\u003eThird – 2.15\u003cbr\u003eFourth – 1.80\u003cbr\u003eFifth – 1.52\u003cbr\u003eSixth – 1.28\u003cbr\u003eSeventh – 1.00\u003cbr\u003eEighth – 0.85\u003cbr\u003eNinth – 0.69\u003cbr\u003eTenth – 0.64\u003cbr\u003eReverse – 4.87\u003c\/p\u003e\r\n\u003cp\u003eAs shown above this transmission offers a beautiful shift recovery in every gear which lends itself the perfect unit for narrow power bands. This allows the use of much larger camshafts in a naturally aspirated application. If you are looking into going to a forced induction setup this shift recovery allows for larger turbo and AR housing for max performance.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eNewly Designed Thermal Flow Control Filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R140 transmission has a newly designed filter has two types of media, fine and course (medium). The course media is common in most filters (orange filter paper), the fine media filtration (White paper) is the newer material. There is a thermal plate inside the filter that separates the course and fine media. When the oil is colder (higher viscosity) at startup, The fluid will flow through both the fine and course filter media.\u003c\/p\u003e\r\n\u003cp\u003eAs the fluid heats up (less viscosity) , the thermal plate will bend and restrict the coarse media section; directing most of the fluid through the fine media. Therefore catching more of the finer debris once the fluid is heated giving it a far superior filtration system.\u003c\/p\u003e\r\n\u003cp\u003eThis new Suncoast 10R140 transmission comes with a new factory filter to ensure zero flow issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Clutches \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli\u003eSmooth engagements\u003c\/li\u003e\r\n\u003cli\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe 10R140 Transmission Assembly \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis is a complete Transmission assembly that fits the new Ford 10R140 Transmission. This Transmission contains all of the upgraded GPZ clutches to improve the reliability of your 10R140 transmission. The Ford 10R140 transmission comes standard in the Ford F-250, F-350, F-450, and F-550.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast upgraded 10R140 transmission new Raybestos GPZ clutches, steels, factory OEM filter, new upgraded 10R140 pump Assembly, New 10R140 upgraded Valve body and high performance overhaul kit.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast 10R140 transmission contains all the upgraded frictions and steels you will need to expand the performance on a 10R140 transmission containing a stock count clutches and steels. This 10R140 rebuild kit was designed to be a re-clutch for a stock capacity unit utilizing the Raybestos GPZ paper and high performance steels. \u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Expanded Capacity Clutch Modules\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe 10R140 transmission, while a very capable unit, has its deficiencies just like anything else when it is asked to perform outside its original design intention. Since it's debut in 2018, Suncoast has been actively involved in research and development of this new platform. With our active partnership with Raybestos powertrain, we can now deliver you the very best product to date with the 10R140 platform. These new Suncoast 10R140 transmission expanded capacity clutch modules that are included to increase the longevity and performance.\u003c\/p\u003e\r\n\u003cp\u003eIf the 10R140 transmission had evil twin redheaded stepchildren, the \"E\" clutch would definitely be one of them. This other proverbial thorn in your side would be the \"F\" clutch.\u003c\/p\u003e\r\n\u003cp\u003eThis clutch, the \"E\" clutch in a 10R140 transmission, is engaged in 1,3,5,6,7,8, and 9th. The real issue becomes apparent pretty quick. This clutch is cycled on 3 times and off 2 times by the time you are in 5th gear. The clutch is on in 1st then cycled off in 2nd, cycled back on in 3rd, then back off in 4th...only to be cycled back on in 5th gear. In higher-horsepower or higher-demand towing and hauling situations, this constant cycling on and off can lead to premature failure. \u003c\/p\u003e\r\n\u003cp\u003eSuncoast has addressed this issue with the 10R140 transmission by improving the clutch friction properties with the New Raybestos GPZ material and increasing clutch capacity by a whopping 20%. This takes the clutch stack-up from a factory 5-clutch stack up to a 6-clutch stack-up. We simultaneously are addressing the heat issue with both improved friction coefficient, as well as increasing surface area. This Suncoast 10R140 transmission \"E\" high capacity comes completely assembled and stacked up with a new (not used) OE machined drum, piston and backing plate.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"E\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIf the 10R140 transmission had evil twin redheaded stepchildren, the \"E\" clutch would definitely be one of them. This other proverbial thorn in your side would be the \"F\" clutch.\u003c\/p\u003e\r\n\u003cp\u003eThis clutch, the \"E\" clutch in a 10R140 transmission, is engaged in 1,3,5,6,7,8, and 9th. The real issue becomes apparent pretty quick. This clutch is cycled on 3 times and off 2 times by the time you are in 5th gear. The clutch is on in 1st then cycled off in 2nd, cycled back on in 3rd, then back off in 4th...only to be cycled back on in 5th gear. In higher-horsepower or higher-demand towing and hauling situations, this constant cycling on and off can lead to premature failure. \u003c\/p\u003e\r\n\u003cp\u003eSuncoast has addressed this issue with the 10R140 transmission by improving the clutch friction properties with the New Raybestos GPZ material and increasing clutch capacity by a whopping 20%. This takes the clutch stack-up from a factory 5-clutch stack up to a 6-clutch stack-up. We simultaneously are addressing the heat issue with both improved friction coefficient, as well as increasing surface area. This Suncoast 10R140 transmission \"E\" high capacity comes completely assembled and stacked up with a new (not used) OE machined drum, piston and backing plate.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eThe \"F\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis clutch is also prone to premature wear as we have seen with other Lepelletier Ravigneaux Gear sets...oncoming clutches in higher gears seems to take the blunt of the beating. With the new 10R140 transmission, the \"F\" clutch is no exception.\u003c\/p\u003e\r\n\u003cp\u003eThe \"F\" clutch is engaged in R,4,5,6,7,8 and 9th. The quickest path to early or premature degradation to this clutch pack is wide open throttle or heavy-load-indexed 3rd to 4th shifts. This is especially prominent in applications where torque management has been deleted.\u003c\/p\u003e\r\n\u003cp\u003eSuncoast has corrected this issue by adding 25% more capacity to this clutch pack by taking it from 4 clutches to 5 in this particular clutch pack.\u003c\/p\u003e\r\n\u003ch2 class=\"light\"\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eMain Pressure Regulator Valve Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eWear in the main pressure regulator bore and on the outboard spool area of the valve is common in listed GM and Ford 10-speed transmissions. This wear minimizes line pressure control resulting in delayed shift engagement, poor shift quality and burnt clutches. Wear at the inboard spool and bore can lead to converter apply issues.\u003c\/p\u003e\r\n\u003cp\u003eInstalling the drop-in Sonnax main pressure regulator valve kit 105740-12K eliminates the leakage of line pressure signal oil to exhaust with the incorporation of an extended front valve spool. This valve spool is 270% longer than the OE spool, so actuates in unworn areas of the bore. The O-ringed end plug provides a positive seal and prevents critical signal fluid from leaking to exhaust. Both of these Sonnax features ensure your units will have proper line pressure control through all drive ranges.\u003c\/p\u003e\r\n\u003cp\u003eEach Suncoast 10R140 transmission gets this modification to the factory 10R140 Valve Body\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eExtended outboard spool is 270% longer than OE and actuates in unworn areas of the bore\u003c\/li\u003e\r\n\u003cli\u003eO-Ringed end plug provides positive seal to prevent critical signal fluid from leaking to exhaust\u003c\/li\u003e\r\n\u003cli\u003eHardcoat anodized aluminum valve combats premature wear\u003c\/li\u003e\r\n\u003cli\u003eDrop-in Zip Valve parts install quickly and easily\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 class=\"light\"\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eSolenoid Stabilization Clip Insert\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIn listed GM and Ford 10-speed transmissions, heavy linear force solenoids (LFS) are held in place by small spring retainers. These spring retainers are prone to collapse, allowing the solenoid to wobble and become off-center with the inboard valve and damage the casting at the clutch valve bore opening. These LFSs actuate by extending a small pintle about .090\" to stroke the inboard clutch control valve. When the spring retainer collapses and allows the LFS to be off-center, the pintle cannot stroke the clutch control valve appropriately, compromising the component apply timing and pressure, resulting in shift complaints and converter issues. Valve body damage can also occur if the LFSs remain loose, resulting in valve damage during rebuild.\u003c\/p\u003e\r\n\u003cp\u003eSonnax solenoid stabilization clip insert 105740-01K can be used in conjunction with OE spring retainers to secure the solenoids back in place. These solid steel clip inserts force the OE spring retainers to completely fill the casting and solenoid groove gap and prevent the retainers from future collapse. If the spring retainer has already collapsed, the clip insert can be used to reform the retainer to its proper size. Simply place it inside the retainer to expand it to appropriate retention dimensions.\u003c\/p\u003e\r\n\u003cp\u003eEach Suncoast 10R140 transmission gets this modification to the factory 10R140 Valve Body\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePrevents future spring retainer collapse\u003c\/li\u003e\r\n\u003cli\u003eReshapes collapsed spring retainers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e\u003cstrong\u003eSolenoid Stabilization Retainer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe heavy linear force solenoids (LFS) in listed GM and Ford 10-speed transmissions are held in place by small spring retainers that are prone to collapse. When the retainers collapse, the solenoid wobbles in the bore, causing damage to the casting at the clutch valve bore opening. These LFSs actuate by extending a small pintle about .090\" to stroke the inboard clutch control valve. When the spring retainer collapses and the LFS is off-center, the pintle cannot stroke the clutch control valve appropriately, resulting in shift complaints and converter issues. Valve body damage can also occur if the LFSs remain loose, resulting in valve damage during rebuild.\u003c\/p\u003e\r\n\u003cp\u003eSonnax solenoid stabilization retainer 105740-19K replaces OE clips and provides 32% more surface area to create more support for the solenoid. Another design upgrade is the top of the clip is rolled over to create a positive stop for the flexible side to land against, furthering the prevention of retainer collapse.\u003c\/p\u003e\r\n\u003cp\u003eEach Suncoast 10R140 transmission gets this modification to the factory 10R140 Valve Body\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e32% More casting-to-solenoid surface area for better support and leverage\u003c\/li\u003e\r\n\u003cli\u003ePositive stop retainer feature to prevent collapse\u003c\/li\u003e\r\n\u003cli\u003eDrop-in Zip Valve™ parts install quickly and easily\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836700021,"sku":"SC-10R140-CAT2D","price":8394.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649509_6d9088f6-f883-480a-a557-9083a407ce3e.jpg?v=1780954065"},{"product_id":"10r80-transmission-overhaul-kit-with-pistons-sc-10r80-ohk-wp","title":"10R80 Transmission Overhaul Kit With Pistons","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e10R80 10-Speed Automatic Transmission Overhaul Repair Kit With Pistons\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMetal Seals\u003c\/li\u003e\r\n\u003cli\u003eGaskets\u003c\/li\u003e\r\n\u003cli\u003eOrings\u003c\/li\u003e\r\n\u003cli\u003eLip Seals\u003c\/li\u003e\r\n\u003cli\u003eSealing Ring Kit\u003c\/li\u003e\r\n\u003cli\u003ePiston Kit\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836732789,"sku":"SC-10R80-OHK-WP","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198653144.jpg?v=1780954050"},{"product_id":"10r60-category-3-ford-bronco-ford-explorer-extra-capacity-rebuild-kit-with-suncoast-pro-loc-valve-body-sc-10r60-cat3","title":"10R60 CATEGORY 3 FORD BRONCO, FORD EXPLORER EXTRA CAPACITY REBUILD KIT WITH SUNCOAST PRO-LOC VALVE BODY","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eCar makers don’t often collaborate on projects, especially when they’re direct competitors. However, looming government fuel economy and emissions mandates can make strange bedfellows. And so, the Ford 10R60 10-speed automatic transmission was born. It was co-developed with General Motors, although Ford apparently took the engineering lead on the design. The mission was to create a 10 speed transmission that could improve both the fuel efficiency and performance of high-horsepower engines. The resulting Ford 10R60 transmission was advanced enough to handle the power of the Ford Explorer and Ford Bronco.\u003c\/p\u003e\r\n\u003cp\u003eLike it or not, a CVT transmission is one of the most efficient gearboxes ever invented. Because there are no actual gears, optimal engine speed can be continuously maintained depending on the load. This allows for seamless acceleration under hard throttle, and lower fuel consumption when you’re just cruising. On a traditional geared transmission, a certain amount of energy gets lost every time a gear ratio is changed. This penalizes both fuel economy and performance, because the engine has to climb back to the RPMs it was just at. The Ford 10R60 10-speed transmission is designed to combine the efficiency benefits of a CVT, with the stepped feel of a traditional automatic transmission.\u003c\/p\u003e\r\n\u003cp\u003eTo create this optimal blend of performance and efficiency, the 10R60 transmission has a wide 7.39 gear ratio spread and a low 4.70 first gear for maximum performance off-the-line. Even though this Ford 10 speed automatic transmission has such a wide gear ratio, it has extremely small steps between the gears. This means the engine RPM only drops (approximately) 20% with each shift, which keeps the engine in the ideal RPM range to achieve either peak performance or efficiency (much like a CVT transmission). The Ford 10R60 also has three overdrive gears, which it can downshift from very quickly.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e10R60 Transmission Gear Ratios\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003eFirst – 4.70\u003cbr\u003eSecond – 2.99\u003cbr\u003eThird – 2.15\u003cbr\u003eFourth – 1.80\u003cbr\u003eFifth – 1.52\u003cbr\u003eSixth – 1.28\u003cbr\u003eSeventh – 1.00\u003cbr\u003eEighth – 0.85\u003cbr\u003eNinth – 0.69\u003cbr\u003eTenth – 0.64\u003cbr\u003eReverse – 4.87\u003c\/p\u003e\r\n\u003cp\u003eAs shown above this transmission offers a beautiful shift recovery in every gear which lends itself the perfect unit for narrow power bands. This allows the use of much larger camshafts in a naturally aspirated application. If you are looking into going to a forced induction setup this shift recovery allows for larger turbo and AR housing for max performance. \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eNewly Designed Thermal Flow Control Filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis 10R60 transmission has a newly designed filter that has two types of media, fine and course (medium). The course medium is common in most filters (orange filter paper), and the fine medium filtration (White paper) is the newer material. There is a thermal plate inside the filter that separates the course and fine media. When the oil is colder (higher viscosity) at startup, the fluid will flow through both the fine and course filter media.\u003c\/p\u003e\r\n\u003cp\u003eAs the fluid heats up (less viscosity), the thermal plate will bend and restrict the coarse media section, directing most of the fluid through the fine media and, therefore, catching more of the finer debris once the fluid is heated giving it a far superior filtration system.\u003c\/p\u003e\r\n\u003cp\u003eThis new SunCoast 10R60 rebuild kit comes with a new factory filter to ensure zero flow issues.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Clutches \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eRaybestos Powertrain GPZ friction plates greatly increase transmission performance and durability. This state-of-the-art friction material far exceeds OE material to withstand high stress, high temperatures and repeated cycling. GPZ's outstanding performance benefits are perfect for heavy-duty vehicles and high-stress driving. Testing of GPZ revolutionary friction material shows that it outperforms OE materials by as much as 20%. Plus, its performance improves as the power increases.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWithstands high horsepower\u003c\/li\u003e\r\n\u003cli\u003eGreater torque capacity\u003c\/li\u003e\r\n\u003cli\u003eMaintains piston travel\u003c\/li\u003e\r\n\u003cli\u003eOptimum performance\u003c\/li\u003e\r\n\u003cli\u003eHigher heat resistance\u003c\/li\u003e\r\n\u003cli\u003eSmooth engagements\u003c\/li\u003e\r\n\u003cli\u003eEnhanced shift feel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt; color: #ff6600;\"\u003e\u003cstrong\u003eThe 10R60 Rebuild Kit and Its Contents \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThis is a complete clutch and steel module kit that fits the new Ford 10R60 Transmission. This module kit contains all of the clutches and steels necessary to rebuild your 10R60 transmission. The Ford 10R60 transmission comes standard in the Ford Ranger, Bronco and the Ford Explorer.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast upgraded 10R60 transmission rebuild kit comes with new Raybestos GPZ clutches, steels, factory OEM filter and high performance overhaul kit.\u003c\/p\u003e\r\n\u003cp\u003eThis Suncoast 10R60 rebuild kit contains all the frictions and steels you will need to do a clutch and steel replacement on a 10R60 transmission containing extra capacity \"E\" clutch modules. This 10R60 rebuild kit was designed to be a re-clutch for a stock capacity unit utilizing the Raybestos GPZ paper and high performance steels.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eThe Expanded Capacity Clutch Modules\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eThe 10R60 transmission, while a very capable unit, has its deficiencies just like anything else when it is asked to perform outside its original design intention. Since it's debut in 2018, Suncoast has been actively involved in research and development of this new platform. With our active partnership with Raybestos powertrain, we can now deliver you the very best product to date with the 10R60 platform. These new Suncoast 10R60 transmission expanded capacity clutch modules that are included are completely drop-in replacements. Absolutely no machining is required.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 12pt;\"\u003eThe \"E\" Clutch\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eIf the 10R60 transmission had evil twin redheaded stepchildren, the \"E\" clutch would definitely be one of them. This other proverbial thorn in your side would be the \"F\" clutch.\u003c\/p\u003e\r\n\u003cp\u003eThis clutch, the \"E\" clutch in a 10R60 transmission, is engaged in 1,3,5,6,7,8, and 9th. The real issue becomes apparent pretty quick. This clutch is cycled on 3 times and off 2 times by the time you are in 5th gear. The clutch is on in 1st then cycled off in 2nd, cycled back on in 3rd, then back off in 4th...only to be cycled back on in 5th gear. In higher-horsepower or higher-demand towing and hauling situations, this constant cycling on and off can lead to premature failure. \u003c\/p\u003e\r\n\u003cp\u003eSuncoast has addressed this issue with the 10R60 transmission by improving the clutch friction properties with the New Raybestos GPZ material and increasing clutch capacity by a whopping 20%. This takes the clutch stack-up from a factory 4-clutch stack up to a 5-clutch stack-up. We simultaneously are addressing the heat issue with both improved friction coefficient, as well as increasing surface area. We are also utilizing 6 vs 5  full thickness steels . With the additional clutch plate and additional full thickness steel we are expanding the capacity without sacrificing steel thickness. This Suncoast 10R60 transmission \"E\" high capacity comes completely assembled and stacked up with a new (not used) OE machined drum, piston and backing plate.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cspan style=\"color: #ff6600; font-size: 12pt;\"\u003e\u003cstrong\u003eThe Pro Loc Valve Body and Pump\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp\u003eWith the SunCoast 10R60 Pro Loc valve body, we are addressing several key issues we have seen in regard to the 10R60 transmissions. This is not an approach that is simply bumping in more line pressure in hopes of ascertaining more clamping force; it’s a multi-faceted approach addressing several key issues when exposing these units to more demanding driving environments. These range from heavy towing and hauling to street racing and drag racing. \u003c\/p\u003e\r\n\u003cp\u003eThe factory 10R60 transmission lock-up circuit is an impressive one, in that it can make converter lockup seem somewhat uneventful. The refinement in its engagement is definitely next-level to what we have seen in the past. As nice as this feels in reference to the NVH (Noise Vibration Harshness), when we start introducing situations where the load demands are testing the limits or outside what the vehicle was initially designed for, it can become a huge problem. \u003c\/p\u003e\r\n\u003cp\u003eIn our SunCoast 10R60 Pro Loc Valve Body we are specifically looking to decrease the time from initial lock-up apply to zero turbine slip. In doing this, we are changing the lockup circuit by replacing the torque converter clutch (TCC) valve in order to increase lockup holding apply fluid pressure. The lockup oil transition time is also improved by modifying critical oiling circuits for the fluid to reach the TCC clutch, resulting in quicker apply time, and therefore, reducing TCC clutch degradation. By reducing degradation per apply cycle, we are allowing for improved reliability and performance.\u003c\/p\u003e\r\n\u003cp\u003e(\u003cstrong\u003e\u003cem\u003eNOTE:\u003c\/em\u003e\u003c\/strong\u003e For maximum results in power levels exceeding 800HP, it is highly recommended that the TCC apply offset be changed in the factory file calibration)\u003c\/p\u003e\r\n\u003cp\u003eThe next facet we address is the lube circuit. The lube circuit on the 10R60 transmission is responsible for supplying oil to the planets, clutches, bushings, etc. From the factory, the lube circuit oil is dispersed throughout the transmission as low as 6 PSI. Under normal load demands, this is perfectly acceptable. In more stressful and demanding situations, an increase in lubrication to clutches, steels, planets is ideal for removing heat and dealing with the increased demands. \u003c\/p\u003e\r\n\u003cp\u003eIn our 10R60 Valve Body we are specifically addressing this circuit from 6 PSI to a whopping 20 PSI. This is a 250% improvement from the factory calibration, resulting in reduced frictional heat generated. This reduction in heat helps lessen pre-mature failure that can become increasingly evident in high horsepower applications.\u003c\/p\u003e\r\n\u003cp\u003eAnother modification to our SunCoast Pro Loc 10R60 Valve Body involves the regulator valve (latch valve) circuit. This oil circuit is responsible for fully engaging the clutches, allowing for full clutch line pressure. In factory form, the regulator valve we are specifically targeting is responsible for A, B, C, and F clutch packs. Of course, our primary clutch pack concern is the 'F\" clutch, which tends to be the first and most prominent clutch pack failure with the 10R60 in higher horsepower or more demanding environments.\u003c\/p\u003e\r\n\u003cp\u003eIn a factory 10R60 valve body calibration, the regulator valve (latch valve) becomes fully engaged, allowing full fluid flow for engagement at 120 psi. When this occurs, the oncoming clutch pack has maximal clamping force. When the clamping force is engaged to max capacity, we ascertain the greatest static and dynamic holding capacity. In stock form or even mildly modified vehicles, this is perfectly suitable; however, when we expose the vehicle to a more demanding environment this can be a weak link.\u003c\/p\u003e\r\n\u003cp\u003eWith our SunCoast 10R60 Valve Body we are decreasing the required pressure to fully engage the regulator to only 80psi. This is a 33% decrease in pressure needed to maximally engage the clutch regulator valve (latch valve) resulting in a quicker shift apply when engaging clutches A, B, C and F. This quicker engagement not only shortens shift times, but it also decreases the heat resonating in the clutch pack, preventing premature degradation and extending clutch life. To improve this shift calibration even more SunCoast is evacuating non-critical oil to increase apply rate.\u003c\/p\u003e\r\n\u003cp\u003eThe factory overall line pressure is modified on this new SunCoast pump\/valve body combo. SunCoast is increasing overall main line pressure as much as 60psi. This additional line pressure not only increases maximal clamping force of the individual clutch packs but increases overall pump volume production. To reduce the potential for runaway pressure and the over-compression of clutch fibers, the SunCoast 10R60 Valve Body does have a built-in bypass, dumping excessive pressure above 420psi.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased Line Pressure, as much as 60psi\u003c\/li\u003e\r\n\u003cli\u003eIncreased clamping force on all clutch packs\u003c\/li\u003e\r\n\u003cli\u003e250% Increase in Cooler Charge Pressure\u003c\/li\u003e\r\n\u003cli\u003eIncreased Lock-up Apply Pressure\u003c\/li\u003e\r\n\u003cli\u003e33% Decrease in Maximal Pressure Actuation of Clutch Packs\u003c\/li\u003e\r\n\u003cli\u003eShortened Shift Times\u003c\/li\u003e\r\n\u003cli\u003eImproved Clutch Wear  \u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836765557,"sku":"SC-10R60-CAT3","price":3995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198649376.jpg?v=1780954043"},{"product_id":"suncoast-6l80e-category-0-raybestos-rebuild-kit-sc-6l80e-cat0-r","title":"SunCoast 6L80E Category 0 Raybestos Rebuild Kit","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003e6L80E Rebuild kit includes the following:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNew Selective Pump Thrust Washer\u003c\/li\u003e\r\n\u003cli\u003eNew Filter Assembly\u003c\/li\u003e\r\n\u003cli\u003eTorrington Thrust Bearing Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Bushing Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Molded Piston Kit\u003c\/li\u003e\r\n\u003cli\u003eAll New Steel Module\u003c\/li\u003e\r\n\u003cli\u003eRaybestos GPZ Friction Module\u003c\/li\u003e\r\n\u003cli\u003eRaybestos 3-5-R Z Pak\u003c\/li\u003e\r\n\u003cli\u003eRaybestos 4-5-6 Z Pak\u003c\/li\u003e\r\n\u003cli\u003eSunCoast Overhaul Kit\u003c\/li\u003e\r\n\u003cli\u003eNew Pan Gasket\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe 6L Platform\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe 6L80 transmission was manufactured in Ypsilanti, Michigan, at the Willow Run Transmission facility. The 6L80 was a much different transmission than its predecessor and was intended to be replaced in 2006 when it was initially released. This new unit came with a new 32-bit controller integrated into the valve body that stayed in constant communication with the ECM via GM's new high-speed can bus network.\u003c\/p\u003e\r\n\u003cp\u003eThis new design approach in the 6L80 utilizes three-way, variable-bleed solenoids to improve shift quality and consistency which are constantly monitored and corrected by utilizing GM's new adaptive shift strategies. The deep first and second gear ratios of 4.02 and 2.36 offer ample torque multiplication with a nice, tight shift recovery. The 6L80 transmission comes with a factory rating of 440 ft. lbs of torque.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-size: 12pt;\"\u003e\u003cstrong\u003eThe Cat 0 6L80 Rebuild\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Category 0 SunCoast 6L80 rebuild kit has everything you need for a successful rebuild. This kit was designed around a rebuild where on improved clutches and steels are needed. This kit includes high performance Raybestos GPZ clutches manufactured with a unique blend of fibers for ultimate stress and high temperature durability. This SunCoast 6L80 rebuild kit also includes the 3-5 reverse Z Pak and the 4-5-6 Z Pak to provide the ultimate solution to common 6L80 failure points. These new Z Paks are a completely redesigned single sided clutch system that outperforms the OE in torque and heat capacity without coning or deflection occurring.\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836831093,"sku":"SC-6L80E-CAT0-R","price":1695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198647647.jpg?v=1780953932"},{"product_id":"allison-shallow-filter-w-spin-on-37711-12","title":"ALLISON SHALLOW FILTER W SPIN ON","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALLISON SHALLOW FILTER W SPIN ON\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"SunCoast Converters","offers":[{"title":"Default Title","offer_id":57273836896629,"sku":"37711-12","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/7656\/2037\/files\/F198642558_f808fdac-20a4-4726-9783-64706d9de5e3.jpg?v=1780953818"}],"url":"https:\/\/wickeddieselva.com\/collections\/powerstroke-2011-2016-6-7l.oembed","provider":"Wicked Diesel VA","version":"1.0","type":"link"}