2011-2018 Ford 6.7L Dual Fuel Pump Kit (With Pump)

ApplicationsFits all 2011 - 2018 Ford 6.7L Power StrokeThis product will NOT work with trucks that have dual alternators. The CP3 pump is mounted where a dual alternator would be located.This product may not work with the EGR cooler installed. It may need to be removed.This product MUST be used in conjunction with custom tuning. Failure to install the correct tuning can result in engine damage.We recommend running an upgraded Low Pressure Fuel System when running this item.Note: If you have a factory dual sided Serpentine belt you must re-use. If the Serpentine belt is single sided it must be replaced with the new supplied belt.DescriptionThe Industrial Injection dual fuel kit is the ultimate for performance. Efficiency is increased and EGTs reduced (constant optimum fuel pressure is maintained) while providing enough fuel to make great horsepower. Both pumps work together, each delivering half the total volume of fuel required, effectively sharing the fuel delivery load. Since each pump now shares the total fuel delivery, the drive load on the original internal fuel pump is reduced by 50% increasing pump reliability. The dual fuel kit provides seamless and consistent fuel flow for large injectors and high level tune programs that demand a high volume of fuel and optimal fuel pressure at the injectors.