Additional Images

Fleece Performance 2nd Gen Swap Kit No Manifold No Coolant Tank and S468 Turbocharger For 4th Gen Cummins 2013-2018 Fleece Performance FPE-674-13-2G-68-NCT

Turbocharger Kit

FPE-674-13-2G-68-NCT
Please Call for Availability
(540) 587-3796

Description

2nd Gen Swap Kit (No Manifold, No Coolant Tank) and Fleece Performance S468 Turbocharger for 4th Gen Cummins (2013-2018)

This kit from Fleece Performance Engineering is referred as a 2nd Gen Swap due to the turbo relocating from the back of the manifold to the same location as the 2nd Generation Dodge (1998.5-2002) turbo location. In other words, the swap kit locates the turbo in the center of the manifold with the outlet flange angled down. The major benefit for 2003 plus Common Rail Cummins trucks is the use of a divided manifold. Capitalizing on the individual cylinder impulses in a divided manifold greatly increases spool up and driving characteristics with a properly matched turbo.

Kit Includes:

  • T4 Divided Turbine Flange Gasket
  • Short Stud Kit
  • 2003 plus Cummins Turbo Oil Feed Line Kit for S300 and S400 Turbos in 2nd Gen Location
  • Cummins Turbo Drain Tube Adapter
  • -10 to 7/8 inch-14 Straight Male Black w/ O-Ring (FPE-78-14-10AN)
  • Turbo Drain Flange Adapter (7/8-14 o-ring)
  • (2) 3/8 inch-16x1 inch Flange Head Bolt
  • (2) M10-1.5x25mm Flange Head Bolt
  • (2) M8 x 1.25 Flange Head for Turbo Drain Kits
  • -10 Braided Steel Cummins Turbo Drain Tube
  • 16MM Metric Port Plug Allen Head (Cummins Coolant Bypass Plug for Automatic Kits)
  • 18MM Metric Port Plug Allen Head
  • Rubber Elbow 5 inch ID X 45 Degree
  • Intake Elbow with MAF/IAT Bung (Molded)
  • Fleece Performance Custom Air Filter for 2nd Gen Kit
  • (2) Breeze T-Bolt Clamp 3.00 inch w/ Plate Bolt
  • (2) Breeze T-Bolt Clamp 5.25 inch w/ Plate Bolt
  • Flat-V Flanged 2nd Gen Downpipe with Clamps
  • 2013-2016 Cummins 2nd Gen Kit CAC Pipe
  • 2003 plus Cummins Exhaust Manifold Gasket Set
  • S400 VBand Compressor Outlet Clamp
  • O-ring for 90 degree Turbo Compressor Discharge Adapter
  • (4) Breeze Mini Hose Clamp SAE 8 w/ Plated Hex Screw
  • 4ft 5/8 inch Heater Hose
  • 2ft 3/4 inch Thermasheild
  • Tee Connector - 5/8 inch (15.9 mm)
  • Cummins 68RFE Transmission Dipstick Tube Bracket
  • 4th Gen Cummins Coolant Riser Delete (-10AN)
  • -10 90 degree to Hose Barb Black
  • 2013-2016 6.7L Cummins A/C Line Reroute Kit
  • Kits can be sold with or without a Coolant Tank, standard T4 Steed Speed Manifold or Cast Manifold

Details

Shipping Information

  • Item Requires Shipping
  • 40.0 lbs.
  • W14.0000” x H14.0000” x L14.0000”
  • Free ground shipping for all orders over $150 lower 48 states

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.