CAMBURG ENGINEERING 2WD/4WD 2022-2025 TOYOTA TUNDRA FOX 3.0 DSC KINETIK SERIES LIFT KIT CAM-310239-K

Our FOX 3.0 DSC Performance kit for the ’22-24 Tundra takes our FOX 2.5 kit to the next level. We utilize FOX’s 3.0 Factory Series internal bypass front coilovers with DSC compression adjusters. This uses FOX’s patented internal bypass design which offers damping progression as they are position sensitive. You have considerably more bottoming control with a plush ride. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The DSC compression adjuster allows you to tune the shock softer and firmer depending on what you’re looking for and how you’re using the truck. This combination of parts not only improves the ride and handling on-road but more so off-road. With our upper control arms these coilovers increase wheel travel and articulation. These also have FOX’s finned aluminum reservoirs with dual recirculating reservoir lines that aid in lowering shock temps under hard use. After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our upper arms address these issues and more. You can choose between our tubular and billet uniball arms depending on your budget and type of use. We’re able to increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road. For more info on all our arms, check out their individual product pages to help make your choice. In the rear we go with a pair of FOX’s 3.0 Factory Series internal bypass shocks with DSC compression adjusters. This uses FOX’s patented internal bypass design which offers damping progression as they are position sensitive. You have considerably more bottoming control with a plush ride.

Important: If you have a 4wd base or Sport model with black front axle shafts, you will need Toyota’s OEM red axle shaft assemblies that are on the TRD Offroad and TRD Pro models as they are longer in length and required for the added wheel travel the FOX coilovers allow for. The OEM part numbers for the red axles are 43420-0C020 and 43410-0C020 and can be purchased through us or your local Toyota dealer. If your truck has the optional TRD 3? lift kit installed, the silver axles supplied in that kit will also work with the FOX coilovers.